Abstract
This paper investigates synthesis of impregnating phenol–formaldehyde resins in which up to 30 wt % formulation phenol is replaced by cardanol, a plant product. The resulting resins were used to make impregnated paper for laminating the plywood and particle boards. The synthesis and structure of cardanol-containing water-soluble resols were studied by IR spectroscopy and 1H NMR, and the reactivity of phenol cardanol formaldehyde resins at 80–150°C was studied by differential scanning calorimetry. The optimal amount of cardanol in relation to phenol in the resin structure was determined. It is shown that the introduction of cardanol into the composition of phenol–formaldehyde resins reduces the impregnation time of kraft paper and improves the surface quality and elasticity of the impregnated paper, with the use of such paper making it possible to decrease the water absorption of laminated particle board materials and the emission of formaldehyde.
Similar content being viewed by others
REFERENCES
A. Gardziella, L. A. Pilato, and A. Knop, Phenolic Resins: Chemistry, Applications, Standardization, Safety and Ecology (Springer-Verlag, Berlin, 2000).
J. Talbiersky, J. Polaczek, R. Ramamoorty, and O. Shishlov, “Phenols from cashew nut shell oil as a feedstock for making resins and chemicals,” Oil Gas Eur. Mag., No. 1, 33–39 (2009).
A. Parambath, Cashew Nut Shell Liquid: A Goldfield for Functional Materials (Springer, Cham, 2017). https://doi.org/10.1007/978-3-319-47455-7
N. S. Baulina, O. F. Shishlov, V. V. Glukhikh, N. G. Chistova, and O. V. Stoyanov, “Preparation and properties of wooden fiberboards with phenol cardanol formaldehyde adhesives,” Polym. Sci., Ser. D 9 (4), 368–373 (2016).
F. Cardona, A. L. Kin-Tak, and J. Fedrigo, “Novel phenolic resins with improved mechanical and toughness properties,” J. Appl. Polym. Sci. 123, 2131–2139 (2012).
C.-M. Lubi and E. T. Thachil, “Particleboard from cashew nut shell liquid,” Polym.-Plast. Technol. Eng. 46 (4), 393–400 (2007).
J.-M. Raquez, M. Deléglise, M.-F. Lacrampe, and P. Krawczak, “Thermosetting (bio) materials derived from renewable resources: A critical review,” Prog. Polym. Sci. 35, 487–509 (2010).
O. F. Shishlov, D. P. Troshin, N. S. Baulina, V. V. Glukhikh, and O. V. Stoyanov, “Synthesis and properties of glues for densified laminated wood based on alcohol-soluble phenol-cardanol-formaldehyde resolic resins,” Polym. Sci., Ser. D 8 (1), 37–41 (2015).
A. C. H. Barreto, D. S. Rosa, P. B. A. Fechine, and S. E. Mazzetto, “Properties of sisal fibers treated by alkali solution and their application into cardanol-based biocomposites,” Composites 42, 492–500 (2011).
A. C. H. Barreto, M. A. Esmeraldo, D. S. Rosa, et al., “Cardanol biocomposites reinforced with jute fiber: Microstructure, biodegradability and mechanical properties,” Polym. Compos. 31, 1928–1937 (2010).
A. E. Júnior, A. Barreto, D. S. Rosa, et al., “Thermal and mechanical properties of biocomposites based on a cashew nut shell liquid matrix reinforced with bamboo fibers,” J. Compos. Mater. 47 (18), 2203–2215 (2015).
A. Balaji, B. Karthikeyan, J. Swaminathan, and C. Sundar, “Mechanical and thermal properties of untreated bagasse fiber reinforced cardanol eco-friendly biocomposites,” Adv. Nat. Appl. Sci. 11, 73–81 (2017).
A. K. Misra and G. N. Pandey, “Kinetics of alkaline-catalyzed cardanol-formaldehyde reaction. I,” J. Appl. Polym. Sci. 29, 361–372 (1984).
A. K. Misra and G. N. Pandey, “Kinetics of alkaline-catalyzed cardanol-formaldehyde reaction. II. Mechanism of the reaction,” J. Appl. Polym. Sci. 30, 969–977 (1985).
A. K. Misra and G. N. Pandey, “Kinetics of alkaline-catalyzed cardanol-formaldehyde reaction. III. Determination of composition of the resin,” J. Appl. Polym. Sci. 30, 979–983 (1985).
N. H. Isaiah, M. Yaseen, and J. S. Aggarwal, “Kinetics of reaction between meta-substituted long chain alkyl phenols and formaldehyde,” Angew. Makromol. Chem. 24 (1), 163–169 (1972).
F. Cardona and T. H. Sultan, “Characterization of environmentally sustainable resole phenolic resins synthesized with plant-based bioresources,” BioResources 11, 965–983 (2016).
S. Vyazovkin, A. K. Burnham, J. M. Criado, et al., “ICTAC Kinetics Committee recommendations for performing kinetic computations on thermal analysis data,” Thermochim. Acta 520 (1–2), 1–19 (2011).
S. Vyazovkin, “Evaluation of activation energy of thermally stimulated solid-state reactions under arbitrary variation of temperature,” J. Comput. Chem. 18 (3), 393–402 (1997).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by K. Lazarev
Rights and permissions
About this article
Cite this article
Shishlov, O.F., Baulina, N.S., Glukhikh, V.V. et al. Synthesis of Cardanol-Containing Resols for Producing Phenolic Films: Protective Coatings for Wood Composites. Polym. Sci. Ser. D 14, 328–334 (2021). https://doi.org/10.1134/S1995421221030308
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1995421221030308