Abstract
This paper presents the results of an investigation of the effect of bentonite concentration on the main physical and mechanical properties of nanocomposites in elastoplasts based on a mixture of random polypropylene with nitrile–butadiene rubber of various types. To improve the compatibility of the mixed components, a graft copolymer of polypropylene with maleic anhydride is used as a compatibilizer. The mechanism of compatibilization of the graft copolymer in the boundary region, in the zone of contact between random polypropylene and nitrile–butadiene rubber, is considered. The optimal concentrations of cross-linking components at which it is possible to obtain dynamically vulcanized nanocomposites is determined.
Similar content being viewed by others
REFERENCES
A. A. Berlin, S. A. Vol’fson, and V. G. Oshman, The Principles of Creating Composite Materials (Khimiya, Moscow, 1990) [in Russian].
N. T. Kakhramanov, A. G. Azizov, V. S. Osipchik, U. M. Mamedli, and N. B. Arzumanova, “Nanostructured composites and polymer materials science,” Plast. Massy., Nos. 1–2, 49–57 (2016).
A. A. Rempel, “Nanotechnologies. Properties and applications of nanostructured materials,” Russ. Chem. Rev. 76 (5), 435–461 (2007).
I. D. Simonov-Emel’yanov, “Construction of structures in dispersed-filled polymers and properties of composite materials,” Plast. Massy 9 (10), 29–36 (2015).
V. I. Kodolov, N. V. Khokhryakov, and A. P. Kuznetsov, “On the mechanism of the effect of nanostructures on structurally changing media during the formation of ‘intelligent’ composites,” Nanotekhnika, No. 3, 27–35 (2006).
L. B. Atlukhanova, G. V. Kozlov, and I. V. Dolbin, “The relationship between the structure of the nanofiller and the properties of polymer nanocomposites: A fractal model,” Materialovedenie, No. 7, 19–22 (2019).
T. A. Rudakova, Yu. M. Evtushenko, Yu. A. Grigor’ev, and A. N. Ozerin, “Low-pressure polyethylene modified by organomontmorillonite,” Vse Mater., Entsikl. Sprav., No. 8, 12–16 (2018).
A. E. Zaikin and G. B. Bobrov, “Morphology of a mixture of polypropylene and nitrile butadiene rubber of peroxide vulcanization,” Khim., Tekhnol. Ispol’zovanie Polim., No. 2, 122–125 (2013).
N. R. Ashurov, V. V. Dolgov, Sh. G. Sadykov, and M. M. Usmanova, Ethylene Nanocomposites Polymers Filled with Layered Aluminosilicates (Fan, Tashkent, 2016).
N. T. Kakhramanov, I. V. Bairamova, S. S. Pesetskii, N. B. Arzumanova, and R. V. Kurbanova, “Rheological properties of nanocomposites based on linear low-density polyethylene and vesuvian,” Plast. Massy., Nos. 9–10, 52–55 (2018).
N. T. Kakhramanov, Z. N. Guseinova, N. S. Koseva, and Yu. N. Kakhramanly, “Dynamic thermoplastic elastomers based on modified low-density polyethylene and nitrile butadiene rubber,” Kompoz. Nanostrukt. 10 (2), 13–20 (2018).
I. D. Simonov-Emel’yanov, N. V. Apeksimov, A. N. Trofimov, et al., “Structure formation, compositions and properties of dispersed-filled polymer nanocomposites,” Plast. Massy., No. 6, 7–13 (2012).
http://www.mining-enc.ru/m/montmorillonit/.
G. V. Kozlov and I. V. Dolbin, “Transfer of mechanical stress from a polymer matrix to a nanofiller in dispersed-filled ones,” Materialovedenie, No. 8, 23–28 (2018).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by K. Lazarev
Rights and permissions
About this article
Cite this article
Kakhramanov, N.T., Guliev, A.D. Theoretical Aspects of Mechanochemical Synthesis of Dynamically Vulcanized Nanocomposites Based on Thermoplastic Elastomers. Polym. Sci. Ser. D 14, 432–437 (2021). https://doi.org/10.1134/S1995421221030114
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1995421221030114