Abstract
The effect of adhesive additives of polar and nonpolar nature on the properties of uncurable sealants based on butyl rubber was studied. It has been found that alkylphenol–formaldehyde resins and rosin are effective additives that increase the cohesive and adhesive strength.
Similar content being viewed by others
REFERENCES
E. Sancaktar, “Classification of adhesive and sealant materials,” Handbook of Adhesion Technology, 2nd ed. (2018), pp. 283–317.
S. Khamani, G. M. M. Sadeghi, and S. Talebi, “Butyl rubber-aluminum adhesion: The effect of acidic and alkaline environments on adhesion strength,” J. Polym. Environ. 26 (3), 989–998 (2018). https://doi.org/10.1007/s10924-017-1007-4
R. Yu. Galimzyanova, Candidate’s Dissertation in Engineering (Kazan, 2008).
M. S. Lisanevich, R. Yu. Galimzyanova, and Yu. N. Khakimullin, “Sealing materials based on polymers: Market and classification. Review,” Vestn. Tekhnol. Univ. 23 (1), 46–54 (2020).
Kh. S. Abzal’dinov, Kh. M. Yaroshevskaya, M. V. Kolpakova, and O. V. Stoyanov, “Current approaches to the development of pressure-sensitive adhesives (review),” Vestn. Tekhnol. Univ. 22 (7), 27–33 (2019).
M. S. Lisanevich, R. Yu. Galimzyanova, S. N. Rusanova, Yu. N. Khakimullin, and O. V. Stoyanov, “Hot-melt sealants of curable type based on butyl rubber and ethylene–vinyl acetate copolymer,” Polym. Sci., Ser. D 11, 359–362 (2018). https://doi.org/10.1134/S1995421218040135
N. N. Shishkina, L. Y. Zakirova, and Y. D. Samuilov, “The effect of adhesive additives on the properties of isoprene rubber,” Key Eng. Mater. 816, 255–259 (2019). doi 10.4028/www.scientific.net/KEM.816.255
M. S. Perova, Candidate’s Dissertation in Engineering (Kazan, 2011).
A. R. Akhmedgoraeva, L. Yu. Zakirova, and A. R. Efimova, “Improving the technological properties of recyclable polyolefins using processing additives,” Vestn. Tekhnol. Univ. 19 (8), 31–33 (2016).
S. I. Volfson, L. Y. Zakirova, Y. S. Karaseva, and A. I. Nigmatullin, “Effect of the technological additives on the properties of recycled polyolefins,” Key Eng. Mater. 816, 90–95 (2019). doi 10.4028/www.scientific.net/KEM.816.90
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors declare that they have no conflict of interest.
Additional information
Translated by G. Levit
Rights and permissions
About this article
Cite this article
Galimzyanova, R.Y., Lisanevich, M.S. & Khakimullin, Y.N. The Effect of Adhesive Additives on the Properties of Uncured Sealants Based on Butyl Rubber. Polym. Sci. Ser. D 14, 319–322 (2021). https://doi.org/10.1134/S1995421221030059
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1995421221030059