Abstract
Data on the surface-energy, acid–base, and thermal characteristics of a wide range of oil–polymer resins have been obtained using wetting methods and differential-thermal analysis. The composition of resins is determined by nuclear magnetic resonance on protons. The dependence of acid–base properties (acidity parameter) of the resin surface on the content of olefinic protons has been found. Samples with best thermal stability are noted.
Similar content being viewed by others
REFERENCES
P. M. Spiecker, K. L. Gawrys, C. B. Trail, and P. K. Kilpatrick, “Effects of petroleum resins on asphaltene aggregation and water-in-oil emulsion formation,” Colloids Surf., A 220, 9–27 (2003).
A. E. Zaikin, I. A. Starostina, and O. V. Stoyanov, “The synergistic effect of a mixture of the oligomer of 2,2,4-trimethyl-1,2-digidrochinoline and polymeric petroleum resin on the adhesion of chlorobutyl rubber to steel,” Polym. Sci., Ser. D 11 (2), 154–158 (2018).
M. J. Zohuriaan-Mehr and H. Omidian, “Petroleum resins: An overview,” J. Macromol. Sci., Part C: Polym. Rev. 40 (1), 23–49 (2000).
S. Cimmino, C. Silvestre, D. Duraccio, and M. Pezzuto, “Effect of hydrocarbon resin on the morphology and mechanical properties of isotactic polypropylene/clay composites,” J. Appl. Polym. Sci. 119, 1135–1143 (2011).
D. Cao, Y. Cao, and C. Wu, “Morphology and dynamic mechanical properties of high density polyethylene/petroleum resin/polyethylene-octylene elastomer blends,” Polym. Bull. 10, 57–67 (2009).
D. Cao, Y. Cao, Y. Ga, W. Guo, and C. Wu, “Studies on the structure, morphology and thermal properties of HDPE/petroleum resin blends,” e-Polymers 12, 1416–1428 (2008).
E. Kinloch, Adhesion and Adhesives: Science and Technology (Chapman & Hall, 1987).
O. V. Stoyanov, I. A. Starostina, E. V. Burdova, and Ya. I. Aleeva, “Modern possibilities of assessing the acid-base properties of polymer coatings. A review of methods, practical applications,” Vestn. Kazan. Tekhnol. Univ., No. 5, 13–20 (2008).
R. J. Good, M. K. Chaudhury, and C. J. van Oss, “Theory of adhesive forces across interfaces,” in Fundamentals of Adhesion, Ed. by L. H. Lee (Springer Science & Business Media, 2013).
Y. I. Aleeva, I. A. Starostina, E. V. Sechko, and O. V. Stoyanov, “Acid-base interactions and their role in forecasting of polymer composites adhesion properties,” in Encyclopedia of Polymer Composites: Properties, Performance and Applications (Nova Publishers, New York, 2009), pp. 681–704.
I. A. Starostina and O. V. Stoyanov, “Development of methods for estimating the surface acid-base properties of polymeric materials,” Vestn. Kazan. Tekhnol. Univ., No. 4, 58–68 (2010).
C. Della Volpe, D. Maniglio, M. Brugnara, et al., “The solid surface free energy calculation: I. In defense of the multicomponent approach,” J. Colloid Interface Sci. 271 (2), 434–453 (2004).
C. Della Volpe and S. Siboni, “Acid-base surface free energies of solids and the definition of scales in the Good–Van Oss–Chaudhury theory,” J. Adhes. Sci. Technol. 14 (2), 235–272 (2000).
I. A. Starostina, O. V. Stoyanov, and N. V. Sokorova, “Determination of free surface-energy parameters using a spatial method,” Polym. Sci., Ser. D 6 (2), pp. 157–159 (2013).
I. A. Starostina, O. V. Stoyanov, and R. Ya. Deberdeev, Polymer Surfaces and Interfaces: Acid-Base Interactions and Adhesion in Polymer-Metal Systems (Apple Academic Press, Toronto–New Jersey, 2015).
I. A. Starostina, O. V. Stoyanov, N. V. Makhrova, D. A. Nguen, M. S. Perova, R. Yu. Galimzyanova, E. V. Burdova, and Yu. N. Khakimullin, “Application of the acid-base approach to explain adhesive properties of modified rubber coatings,” Polym. Sci., Ser. D 5 (2), pp. 89–91 (2012).
E. Kraus, L. Orf, V. Sitnik, R. Perelygina, E. Burdova, I. Starostina, and O. Stoyanov, “Composition and surface energy characteristics of new petroleum resins,” Polym. Eng. Sci. 57, 1028–1032 (2017). https://doi.org/. doi 10.1002/pen.24482
Yu. V. Dumskii, B. I. No, and G. M. Butov, Chemistry and Technology of Petroleum Polymer Resins (Khimiya, Moscow, 1999) [in Russian].
ACKNOWLEDGMENTS
This work was supported by state assignment no. 10.4763.2017/8.9.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by Sh. Galyaltdinov
Rights and permissions
About this article
Cite this article
Perelygina, R.A., Starostina, I.A., Efimova, A.R. et al. Comparative Analysis of Surface and Thermal Properties of Oil—Polymer Resins. Polym. Sci. Ser. D 11, 369–373 (2018). https://doi.org/10.1134/S1995421218040172
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1995421218040172