Abstract
This review considers methods for the modification of phenol-formaldehyde resins to improve the characteristics of adhesive compositions made on their basis (lower viscosity, higher viability, initial strength gain, and complete strength gain of the adhesive bond; higher elasticity, heat resistance, vibration resistance, and stickiness of the adhesive; ready-glue cost reduction) and to improve the quality of glued-wood materials by reducing the content of toxic substances in the adhesive and their emission.
Similar content being viewed by others
References
O. Syao and G. V. Malysheva, “Properties and application of rubber-based sealants,” Polym. Sci., Ser. D 7 (3), 222–227 (2014).
N. I. Baurova and A. Y. Sergeev, Application of differential-scanning calorimetry for studying the properties of filled adhesive materials," Polym. Sci., Ser. D 7 (2), 140–144 (2014).
K. G. Brutyan, G. S. Varankina, and M. P. Glebov, “New fillers for synthetic resins used in wood processing,” in Deposited Manuscript no. 369-V2003 (VINITI, Moscow, 2003) [in Russian].
M. P. Glebov and K. G. Brutyan, “Analysis of natural mineral modifiers for gluing resins,” in Proc. Int. Sci-Pract. Conf. Primary Woodworking: Sawmilling and Drying of Sawn Timber. Status and Prospects of Development (SPbGLTA, St. Petersburg, 2007), pp. 28–33 [in Russian].
V. P. Kondrat’ev, A. B. Chubov, and B. G. Sokolova, “New types of effective adhesives for the production of water-resistant environmentally friendly plywood,” Izv. S.-Peterb. Lesotekh. Akad. 191, 169–179 (2010).
G. S. Varankina and A. N. Chubinskii, Formation of Low-Toxic Glued Wood Materials (Khimizdat, St. Petersburg, 2014) [in Russian].
V. N. Volynskii, Technology of Glued Materials (AGTU, Arkhangel’sk, 2003) [in Russian].
V. P. Kondrat’ev and V. I. Kondrashchenko, Synthetic Glues for Wood Materials (Nauchnyi mir, Moscow, 2004) [in Russian].
A. A. Leonovich, Technology of Wood Boards. Progressive Solutions (Khimizdat, St. Petersburg, 2005) [in Russian].
V. P. Kondrat’ev, A. B. Chubov, and E. G. Sokolova, “Improvement of operational properties and technology of plywood with increased water resistance,” Izv. S-Peterb. Lesotekh. Akad. 194, 116–124 (2011).
E. Kennet, A. Blackmore, and U. Stout, US Patent No. 3956207 (1976).
S. Yu. Nikonov and A. S. Nikonov, RF Patent No. 2447118 (2012).
D. S. Rusakov, Candidate’s Dissertation in Engineering (St. Petersburg, 2013).
D. S. Rusakov and G. S. Varankina, “Influence of technological factors of plywood production on the quality of finished products,” Izv. S.-Peterb. Lesotekh. Akad., No. 194, 154–158 (2011).
G. S. Varankina, Doctoral Dissertation in Engineering (St. Petersburg, 2014).
K. G. Brutyan, G. S. Varankina, and A. N. Chubinskii, RF Patent No. 2245890 (2011).
V. P. Kondrat’ev and Yu. G. Doronin, Waterproof Adhesives in Woodworking (Lesnaya prom-st’, Moscow, 1988) [in Russian].
S. A. Ugryumov, A. A. Osetrov, and A. V. Sviridov, “Determination of the properties of modified phenolformaldehyde oligomers and wood panels based on them,” Polym. Sci., Ser. D 8 (2), 113–115 (2015).
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © S.A. Ugryumov, 2017, published in Klei, Germetiki, Tekhnologii, 2017, No. 5, pp. 14–19.
Rights and permissions
About this article
Cite this article
Ugryumov, S.A. Methods of modification of phenol-formaldehyde resins applied in the production of glued-wood materials. A review. Polym. Sci. Ser. D 10, 309–312 (2017). https://doi.org/10.1134/S1995421217040165
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1995421217040165