Abstract
The influence of new adhesion promoters on the strength of bonding between unfilled rubber materials based on synthetic isoprene rubber SKI-3 and a brass-plated metal cord was studied. The synthesized adhesion promoters are silica fillers modified with cobalt, nickel, or a combination of cobalt and nickel, and they contain on their surface a lower number of ions of metals with variable valency compared to industrial cobalt stearate. It was shown that, among the synthesized adhesion promoters, silica fillers modified with cobalt are the most promising.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
A. V. Kasperovich, O. A. Krotova, E. E. Potapov, S. V. Reznichenko, and V. F. Shkodich, Polym. Sci., Ser. D 9 (1), pp. 68–71 (2016).
I. L. Shmurak, S. A. Matyukhin, and L. I. Dashevskii, Technology for Mounting the Cord to Rubber (Khimiya, Moscow, 1993) [in Russian].
P. Legotski and S. M. Kavun, Kauch. Rezina, No. 1, 32–35 (1999).
G. I. Kostrykina, T. N. Sudzilovskaya, and M. A. Kokoreva, in Mater. 22th Sympos. Problems of Tires and Rubber-Cord Composites (Moscow, 2011) [in Russian].
A. E. Zaikin, N. N. Nikitina, A. V. Chernov, and O. V. Stoyanov, “Modified rubber adhesives with high heat resistance,” Klei. Germetiki. Tekhnol., No. 9, 11–13 (2005).
A. V. Chernov, A. E. Zaikin, N. N. Nikitina, and O. V. Stoyanov, Investigation of the effect of various reagents on rubber adhesives with high heat resistance, Vestn. Kazan Tekhnol. Univ., No. 2, 2003, pp. 340–344. http://elibrary.ru/item.asp?id=9270103.
L. A. Meledina, E. V. Sakharova, K. L. Kandyrin, and E. N. Gordon, Kauch. Rezina, No. 5, 18–21 (2006).
W. J. Van Ooij, Rubb. Chem. Technol. 57 (3), 421–465 (1984).
W. J. Van Ooij, W. E. Weening, and P. F. Murray, Rubb. Chem. Technol 54 (2), 227–254 (1981).
V. M. Goryaev, A. P. Bobrov, V. I. Zaporozhchenko, and M. F. Grigor’ev, Kauch. Rezina, No. 2, 29–35 (1995).
L. A. Meledina, E. V. Sakharova, K. L. Kandyrin, and E. E. Potapov, Vestn. Moscow Tekhnol. Univ., No. 5, 74–77 (2006).
W. S. Fulton, Rubb. Chem. Technol. 78 (3), 426–457 (2005).
W. J. Van Ooij, Handbook of Rubber Bonding (RAPRA Technology, 2001).
W. J. Van Ooij and M. E. F. Biemond, Rubb. Chem. Technol. 57 (4), 686–702 (1984).
Yu. A. Bobrov, K. D. Kandyrin, I. L. Shmurak, and E. E. Potapov, Kauch. Rezina, No. 2, 37–45 (2005).
J. M. Kim and W. J. Van Ooij, Rubb. Chem. Technol 75, 199 (2002).
G. G. Salych, E. V. Sakharova, A. G. Shvarts, and E. E. Potapov, Refining and Petrochemical Industry: An Overview (TsNIITEneftekhim, Moscow, 1988) [in Russian].
I. Yu. Kitaev and G. I. Kostrykina, Izv. Vyssh. Uchebn. Zaved., Khim. Khim. Tekhnol. 46 (9), 40–42 (2003).
I. L. Shmurak, Kauch. Rezina, No. 2, 56–60 (2013).
W. J. Van Ooij, J. Giridhar, and J. Ahn, Kauts. Gummi. Kunstst. 44 (4), 348 (1991).
A. F. Puchkov, S. V. Lapin, I. L. Shmurak, and V. F. Kablov, Kauch. Rezina, No. 5, 42–43 (2014).
L. N. Andreikova, S. Ya. Khodakova, and E. A. Khorova, Kauch. Rezina, No. 3, 68–69 (2013).
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © O.A. Krotova, A.V. Kasperovich, Zh.S. Shashok, O.V. Stoyanov, 2016, published in Klei, Germetiki, Tekhnologii, 2016, No. 10, pp. 33–39.
Rights and permissions
About this article
Cite this article
Krotova, O.A., Kasperovich, A.V., Shashok, Z.S. et al. Adhesive properties of rubbers with promoters based on modified silica filler. Polym. Sci. Ser. D 10, 128–133 (2017). https://doi.org/10.1134/S1995421217020101
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1995421217020101