Abstract
Results of experimental and theoretical strength analysis of carbon composite made with the piercing technology are given. It was found that fabric piercing exerts insignificant influence on the characteristics of tensile and bending strength.
Similar content being viewed by others
References
V. A. Nelyub, “Use of polymer composite materials in the shipbuilding industry for the repair of ship’s superstructures,” Remont, Vosstanov., Modernizatsiya, No. 5, 21–24 (2013).
V. A. Nelyub, D. V. Grashchenkov, D. I. Kogan, and I. A. Sokolov, “Use of direct molding techniques in the production of large parts of fiberglass,” Khim. Tekhnol. 13 (12), 735–739 (2012).
G. V. Malysheva, E. S. Akhmetova, and A. N. Marycheva, “Estimation of glass transition temperature of polysulfone modified epoxy binders,” Glass Phys. Chem. 40 (5), 543–548 (2014).
A. S. Borodulin, G. V. Malysheva, and J. K. Romanova, “Optimization of rheological properties of binders used in vacuum assisted resin transfer molding of fiberglass,” Polym. Sci., Ser. D 8 (4), 300–303 (2015).
G. V. Malysheva and S. A. Gusev, “Investigation of the network effect of tissues on the impregnation kinetics during the formation of products from carbon fiber reinforced plastics,” Vse Mater., Entsikl. Sprav., No. 5, 2–6 (2016).
V. A. Nelyub, A. S. Borodulin, L. P. Kobets, and G. V. Malysheva, “Capillary fluid dynamics oligomeric binders,” Vse Mater., Entsikl. Sprav., No. 3, 43–48 (2016).
C. Sickinger and A. Herrmann, “Structural stitching as a method to design high-performance composites in future,” in Pros. 11th Int. Techtextil-Sympos. for Technical Textiles, Nonwovens and Textile-Reinforced Materials (2001), Vol. 4, pp. 23–26.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © I.A. Buyanov, D.S. Vdovin, 2016, published in Klei, Germetiki, Tekhnologii, 2016, No. 10, pp. 22–24.
Rights and permissions
About this article
Cite this article
Buyanov, I.A., Vdovin, D.S. Development of a design procedure and preform piercing technology for carbon-composite manufacturing. Polym. Sci. Ser. D 10, 103–105 (2017). https://doi.org/10.1134/S1995421217020034
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1995421217020034