Abstract
Composition and processing techniques of polymeric composite material with increased conductivity intended for use as a lightning protective coating have been developed. Material obtained by the infusion molding process is carbon nanocomposite material modified by the introduction of carbon nanoparticles into the composition of a polymer matrix. The results of the investigation of physicochemical properties and lightning resistance of the developed carbon nanocomposite are presented.
Similar content being viewed by others
References
E. N. Kablov, “Strategic directions of development of materials and technologies for their processing for the period up to 2030,” Aviats. Mater. Tekhnol., No. S, 7–17 (2012).
E. N. Kablov, “Modern materials–the basis of innovative modernization of Russia,” Met. Evrazii, No. 3, 10–15 (2012).
D. I. Kogan, M. I. Dushin, A. V. Borshchev, E. A. Veshkin, P. A. Abramov, and K. V. Makrushin, “Properties of structural carbon fiber reinforced plastics manufactured by impregnation under vacuum,” Izv. Samar. Nauchn. Tsentra Ross. Akad. Nauk 14 (4), 762–766 (2012).
M. I. Dushin, A. V. Khrul’kov, D. I. Kogan, R. R. Mukhametov, and R. Yu. Karavaev, “Carbon fiber reinforced plastics obtained by the infusion of the melt binder,” Kompoz. Nanostrukt., No. 2, 42–50 (2013).
A. V. Khrul’kov, M. I. Dushin, Yu. O. Popov, and D. I. Kogan, “Research and development of the autoclave and autoclave-free techniques for PCM molding,” Aviats. Mater. Tekhnol., No. S, 292–301 (2012).
A. V. Borshchev, A. V. Khrul’kov, and D. S. Khalturina, “Production of highly porous polymer composite material for use in lowand moderately loaded constructions,” Tr. VIAM, No. 7, (2013). http://www.viam-works.ru
R. R. Mukhametov, K. R. Akhmadieva, M. A. Kim, and A. N. Babin, “Melt binders for advanced methods of manufacturing a new generation of PCM,” Aviats. Mater. Tekhnol., No. S, 260–265 (2012).
G. M. Gunyaev, E. N. Kablov, and V. M. Aleksashin, “Modification of structural carbon fiber reinforced plastic by carbon nanoparticles,” Ross. Khim. Zh. 54 (1), 5–11 (2010).
G. M. Gunyaev, L. V. Chursova, A. E. Raskutin, and A. G. Gunyaeva, “Lightning resistance of advanced polymer composites,” Aviats. Mater. Tekhnol., No. 2, 36–43 (2012).
G. M. Gunyaev, L. V. Chursova, A. E. Raskutin, O. A. Komarova, and A. G. Gunyaeva, “Structural polymer carbon nanocomposites–a new direction in materials science,” Vse Mater., Entsikl. Sprav., No. 12, 2–9 (2011).
G. M. Gunyaev, L. V. Chursova, A. E. Raskutin, G. V. Nachinkina, A. G. Gunyaeva, and V. M. Kuprienko, “Lightning protection coatings for structural carbon fiber reinforced plastic containing nanoparticles,” VseMater., Entsikl. Sprav., No. 3, 24–35 (2012).
G. M. Gunyaev, L. V. Chursova, O. A. Komarova, and A. G. Gunyaeva, “Structural carbon fiber reinforced plastics modified by nanoparticles,” in Aviation Materials and Technologies: Jubilee Scientific and Engineering Collection (Supplement to the journal Aviation Materials and Technologies) (VIAM, Moscow, 2012), pp. 277–286.
E. N. Kablov, “Chemistry of Aviation Materials Science,” Ross. Khim. Zh. 54 (1), 3–4 (2010).
E. N. Kablov and G. M. Gunyaev, “Nanomaterials?a breakthrough in materials science of the microcosm,” in 75 years. Aviation Materials: Selected Works of VIAM (VIAM, Moscow, 2007).
G. M. Gunyaev, E. N. Kablov, and V. M. Aleksashin, “Modification of structural carbon fiber reinforced plastic by nanoparticles,” Ros. Khim. Zhurn. (Zh. Vses. Khim. O-va. im. D. I. Mendeleeva), No. 1, 5 (2010).
E. N. Kablov, S. V. Kondrashov, and G. Yu. Yurkov, “Prospects for the use of carbonaceous nanoparticles in binders for polymeric composite materials,” Ross. Nanotekhnol. 8 (3), 28–46 (2013).
S. V. Bukharov, A. G. Gunyaeva, and A. E. Raskutin, “Study of the zones of the lightning protection coating made of carbon fiber reinforced plastic affected by high-voltage discharges simulating lightning currents,” Nauchno-Tekh. Sb. Nauchn. Tr. (Vestn. MATI), No. 22 (2014).
I. N. Gulyaev, A. G. Gunyaeva, A. E. Raskutin, M. Yu. Fedotov, and K. V. Sorokin, “Lightning protection and built-in control for the structures made of PCM,” Tr. VIAM, No. 4 (2013). http://www.viamworks.ru
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.G. Gunyaeva, L.V. Chursova, L.V. Cherfas, O.A. Komarova, 2015, published in Vse Materialy. Entsiklopedicheskii Spravochnik, 2015, No. 10, pp. 25–32.
Rights and permissions
About this article
Cite this article
Gunyaeva, A.G., Chursova, L.V., Cherfas, L.V. et al. Lightning-resistant carbon-fiber-reinforced plastics modified with carbon nanoparticles obtained by an infusion molding process. Polym. Sci. Ser. D 9, 228–233 (2016). https://doi.org/10.1134/S1995421216020076
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1995421216020076