Abstract
The results of a study of the adhesive properties of a composite asphalt binder modified with pyrolytic lignin—a water-insoluble fraction of liquid products of fast pyrolysis of wood—are presented. It is shown that 10 wt % pyrolytic lignin increases the adhesive strength of the composite asphalt binder and the obtained samples of modified asphalt concrete correspond to the requirements of GOST (State Standard) 9128–84.
Similar content being viewed by others
References
Information on the definition of bitumen, bitumen properties, and the use of bitumen. http://investments.academic.ru
Resolution of the II Congress of the CIS Road Workers. Rosavtodor. http://rosavtodor.ru/activity/157/160/6710.html
Quality parameters of bitumen. http://rikon.su/articles/bitum_character/
Technical Specifications TU 0251-001-81073469–2013. Liquid Pyrolysis Fuel (2013).
Guide on soils and materials reinforced with organic binders. http://www.znaytovar.ru/gost/2/Rukovodstvo Rukovodstvo_po_grun.htm
V. P. Kiselev, Doctoral Dissertation in Engineering (Krasnoyarsk, 2006).
Guidelines on the application of composed binders in coatings composed of highways. http://standartgost.ru/snip
G. M. Fayzrakhmanova, O. N. Il’ina, V. N. Bashkirov, and A. N. Grachev, “Investigation of liquid products of fast pyrolysis of low-quality wood (bio-oil) as an integrated additive for road-building materials,” Vestn. Kazan. Tekhnol. Univ., No. 20, 213–216 (2011).
G. M. Fayzrakhmanova, S. A. Zabelkin, A. N. Grachev, et al., “Using the wood pyrolysis liquid to produce the binder component for road construction,” Vestn. Kazan. Tekhnol. Univ. 16 (8), 312–314 (2013).
G. M. Fayzrakhmanova, S. A. Zabelkin, A. N. Grachev, and V. N. Bashkirov, “Use of the wood pyrolysis liquid to produce chemicals,” Vestn. Kazan. Tekhnol. Univ. 15 (15), 101–103 (2012).
S. A. Zabelkin, G. M. Faizrakhmanova, L. N. Gerke, et al., “Synthesis of chemical products using wood pyrolysis liquids,” Vestn. MGUL, Lesnoi Vestn., No. 7, 131–135 (2012).
A. N. Grachev, T. D. Iskhakov, V. N. Bashkirov, and R. M. Imanaev, “Dispose of used wooden sleepers by pyrolysis,” Vestn. KGTU, No. 5, 166–171 (2008).
K. V. Kulikov, V. V. Litvinov, V. N. Piyalkin, et al., “Preparation and study of liquid biofuels from biomass of wood by pyrolysis,” Vestn. KGTU 15 (13), 197–200 (2012).
A. S. Pollard, M. R. Roverc, and R. C. Brown, “Characterization of bio-oil recovered as stage fractions with unique chemical and physical properties,” J. Anal. Appl. Pyrolysis, No. 93, P. 129–138 (2012).
Development of rubber-modified fractionated biooil for use as noncrude petroleum binder in flexible pavements. http://www.ltrc.lsu.edu/
S. A. Zabelkin, A. N. Grachev, and V. N. Bashkirov, “Processing of wood to liquid fuels and its energy use,” Vestn. Kazan. Tekhnol. Univ., No. 10, 369–374 (2010).
V. P. Kiselev, I. S. Rubailo, G. V. Vasilovskaya, et al., “The study of the interaction of butadiene styrene thermoplastic elastomer with bitumen,” Izv. Vyssh. Uchebn. Zaved., Stroit., No. 7, 51–54 (1997).
V. A. Vyrodov, A. N. Kislitsin, and M. I. Glukhoreva, Technology of Wood Chemical Industry (Lesnaya Prom-st, Moscow, 1997) [in Russian].
V. P. Kisilev, et al., “Evaluation of adhesion and cohesion properties of modified road bitumen,” Vestn. TGASU, No. 4, 129–138 (2010).
A. N. Grachev, V. N. Bashkirov, S. A. Zabelkin, et al., RF Patent No. 2395559 (March 10, 2009).
A. N. Grachev, et al., “Thermochemical processing of lignocellulosic feedstocks into biofuels and chemicals,” Vestn. Kazan. Tekhnol. Univ. 16 (21), 109–111 (2013).
I. M. Grushko and I. V. Korolev, Road Construction Materials: Textbook for Higher Education (Transport, Moscow, 1991) [in Russian].
S. A. Zabelkin, G. M. Faizrakhmanova, A. N. Grachev, and V. N. Bashkirov, “Investigation of the adhesive properties of the composite bitumen binder using fast wood pyrolysis liquid products,” Vestn. Kazan. Tekhnol. Univ. 17 (8), 284–286 (2014).
S. A. Zabelkin, G. M. Faizrakhmanova, A. N. Grachev, and V. N. Bashkirov, “The temperature stability of the bitumen binder modified by fast wood pyrolysis products,” Vestn. Kazan. Tekhnol. Univ. 17 (15), 252–255 (2014).
A. V. Murafa, D. B. Makarov, and V. G. Khozin, “Bitumen latex emulsion mastics for waterproofing and sealing,” Klei, Germetiki, Tekhnol., No. 8, 18–21 (2012).
A. B. Radbil’, I. S. Il’ichev, A. A. Shalashova, and L. L. Semenycheva, “Deep processing of liquid-phase waste of the timber industry to create new materials,” Vse Mater., Entsikl. Sprav., No. 11, 49–54 (2013).
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © G.M. Fayzrakhmanova, S.A. Zabelkin, A.N. Grachev, V.N. Bashkirov, 2015, published in Klei. Germetiki. Tekhnologii, 2015, No. 12, pp. 13–17.
Rights and permissions
About this article
Cite this article
Fayzrakhmanova, G.M., Zabelkin, S.A., Grachev, A.N. et al. A study of the properties of a composite asphalt binder using liquid products of wood fast pyrolysis. Polym. Sci. Ser. D 9, 181–184 (2016). https://doi.org/10.1134/S1995421216020052
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1995421216020052