Abstract
The curing of phenol-formaldehyde resin, furfural-acetone (FA) monomer, and phenol-formaldehyde resin modified by FA monomer is analyzed by the differential scanning calorimetry method. The dependence of time on 50 and 90% conversion of the resins under investigation on temperature is calculated. The processes of intermolecular interactions leading to curing of these resins are described. It is shown that the modification of phenol-formaldehyde resin by furfural-acetone monomer allows one to increase the curing rate and curing degree and decrease the curing time.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
S. A. Ugryumov, A. V. Osetrov, and A. A. Fedotov, “Properties of adhesive compositions based on modified phenol-formaldehyde oligomer,” Vse Mater., No. 4, 23–26 (2014).
G. V. Malysheva, “Physical chemistry of adhesives,” Materialovedenie, No. 3, 9–14 (2005).
V. A. Nelyub, “New materials and technologies for manufacturing parts from GRP based on polyester matrix,” Materialovedenie, No. 7, 30–33 (2012).
V. A. Nelyub, D. V. Grashchenkov, D. I. Kogan, and I. A. Sokolov, “The use of direct methods of extrusion in the production of large fiberglass parts,” Khim. Tekhnol., No. 12, 735–739 (2012).
I. A. Aleksandrov, G. V. Malysheva, V. A. Nelyub, I. A. Buyanov, I. V. Chudnov, and A. S. Borodulin, “A study of fracture surfaces of carbon plastics produced by melt and mortar technology,” Vse Mater., No. 3, 7–12 (2012).
T. A. Guzeva, “Methods for assessing the performance properties of polymeric composite materials,” VseMater., No. 3, 17–19 (2014).
N. I. Baurova and A. V. Sergeev, “Application of differentialscanning calorimetry for studyng the properties of filled adhesive materials,” Polym. Sci., Ser. D 7 (2), 140–144.
G. V. Malysheva, E. Sh. Akhmetova, and A. N. Maryckeva, “Estimation of glass transition temperature of polysulfone-modified epoxy binders,” Glass Phys. Chem. 40 (5), 543–548 (2014).
S. A. Ugryumov, A. V. Osetrov, and A. V. Sviridov, “Estimation of properties of modified phenol-formaldehyde oligomers and wood plates based on them,” Klei, Germetiki, Tekhnologii, No. 10, 24–26 (2014).
S. A. Ugryumov, A. V. Osetrov, and A. A. Fedotov, “The Use of adhesive compositions based on phenol-formaldehyde oligomer modified with furan oligomer in the manufacture of wood boards,” Entsikl. Inzh.-Khim., No. 6, 24–27 (2014).
A. N. Muranov, G. V. Malysheva, V. A. Nelyub, I. A. Buyanov, I. V. Chudnov, and A. S. Borodulin, “Investigation of Properties of Polymeric Composition Materials Abound a Heterogeneous Matrix,” Polym. Sci., Ser. D 6 (3), 256–259 (2013).
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © S.A. Ugryumov, A.V. Osetrov, 2015, published in Klei. Germetiki. Tekhnologii, 2015, No. 5, pp. 32–34.
Rights and permissions
About this article
Cite this article
Ugryumov, S.A., Osetrov, A.V. Investigation of curing processes of modified phenol-formaldehyde resin. Polym. Sci. Ser. D 8, 304–306 (2015). https://doi.org/10.1134/S1995421215040176
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1995421215040176