Abstract
The properties are presented of phenolic-elastomer and high-strength modified epoxy foaming structural film adhesives. The properties of compounds with a honeycomb structure made with the use of various types of film adhesives. The advantages of the film adhesives over other types of adhesives are shown.
Similar content being viewed by others
References
E. N. Kablov, “Strategic directions of the development of materials and their processing technologies for the period up to 2030,” Aviats. Mater. Tekhnol. 7–17 (2012).
RF Patent No. 2471842, Adhesive composition (May 11, 2011).
N. F. Lukina, L. A. Dement’eva, A. P. Petrova, and A. A. Serezhenkov, “Structural and heat-resistant adhesives,” Aviats. Mater. Tekhnol. 328–335 (2012).
D. V. Grashchenkov and L. V. Chursova, “Development strategy of polymer composites and functional materials,” Aviats. Mater. Tekhnol. 231–242 (2012).
A. P. Petrova, N. F. Lukina, L. A. Dement’eva, et al., “Aircraft adhesives,” Ross. Khim. Zh. 54 (1), 46–52 (2010).
RF Patent No. 2276679, Heat-resistant adhesive composition (November 29, 2004).
L. A. Dement’eva, L. I. Bocharova, N. F. Lukina, and A. P. Petrova, “Multifunctional epoxy adhesives for aircraft equipment,” Klei. Germetiki. Tekhnologii, No. 7, 18–20 (2006).
I. A. Sharova and A. P. Petrova, “Review of proceedings of the International Conference on Adhesives and Sealants WAC-2012,” Tr. VIAM, No. 8 (2013) (e-zine).
A. P. Petrova and N. F. Lukina, “Application of Adhesion Coats and Systems of Surface Modification during Gluing,” Polym. Sci. Ser. D 7 (3), 177–180 (2014).
A. P. Petrova, A. A. Donskoi, A. E. Chalykh, and A. A. Shcherbina, Adhesives and Sealants: A Handbook (NPO Professional, St. Petersburg, 2008) [in Russian].
A. P. Petrova, “Main stages of gluing technology,” Polym. Sci. Ser. D 7 (4), 293–298 (2014).
K. E. Kutsevich, L. A. Dement’eva, N. F. Lukina, and L. V. Chursova, “The properties and use of a VK-36RM adhesive for aircraft engineering,” Polym. Sci. Ser. D 7 (2), 112–114 (2014).
I. V. Kurshubadze and A. P. Petrova, “The efficiency of adhesive joints under marine subtropical conditions,” Klei. Germetiki. Tekhnologii, No. 12, 14–17 (2005).
V. V. Murashov, E. I. Kosarina, and A. S. Generalov, “Quality control of aircraft parts made of polymeric and composite materials and multilayer laminated structures,” Aviats. Mater. Tekhnol., No. 3, 65–70 (2013).
A. P. Petrova, N. F. Lukina, and I. A. Sharova, “Evaluation of the strength of adhesive joints made with epoxy adhesives under the influence of various factors,” VseMater. Entsikl. Sprav., No. 8, 28–34 (2013).
N. F. Lukina, L. A. Dement’eva, A. P. Petrova, and T. Yu. Tyumeneva, “Properties of adhesives and adhesive materials used in aviation industry,” Polym. Sci. Ser. D 2 (3), 147–154 (2009).
E. N. Kablov, V. T. Minakov, and L. I. Anikhovskaya, “Adhesives and materials based on them for repair of aviation equipment structures,” Aviats. Mater. Tekhnol., No. 1, 61–65 (2002).
S. A. Karimova, T. G. Pavlovskaya, and A. P. Petrova, “Preparation of aluminum alloy surface using anodic oxidation,” Klei. Germetiki. Tekhnologii, No. 1, 34–38 (2014).
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.P. Petrova, N.F. Lukina, L.A. Dement’eva, L.I. Anikhovskaya, 2014, published in Klei. Germetiki. Tekhnologii, 2014, No. 10, pp. 7–12.
Rights and permissions
About this article
Cite this article
Petrova, A.P., Lukina, N.F., Dement’eva, L.A. et al. Film structural adhesives. Polym. Sci. Ser. D 8, 138–143 (2015). https://doi.org/10.1134/S1995421215020148
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1995421215020148