Abstract
Catalyzed epoxy systems have been studied consisting of an ED-20 epoxy diane oligomer ED-20, a curing catalyst (dicyandiamide (DCDA)), and an accelerator (an asymmetric urea based on toluene diisocyanate). The chemical composition and structure of the catalyzed epoxy systems have been established by IR and NMR spectroscopy in the initial and cured states. The influence of the composition of the complex catalyst system of curing on the mechanisms of chemical transformation of epoxy system has been considered. It is shown that the products of interaction of epoxydiane oligomers with DCDA in the presence of the accelerator-asymmetric urea of Dyhard UR500 brand-is a complex system consisting of chains of polyesters produced by a chain growth mechanism and amine sites, as well as interaction products of epoxy groups with imines, isocyanates, and hydroxyl groups with nitriles.
Similar content being viewed by others
References
E. N. Kablov, Vestn. Ross. Akad. Nauk 82 (6), 520–530 (2012).
E. N. Kablov, O. V. Startsev, I. S. Deev, and E. F. Nikishin, “Properties of polymer composite materials after exposure to the open space in Earth orbits,” Vse Mater. Entsikl. Sprav., No. 11, 2–16 (2012).
E. N. Kablov, Ross. Khim. Zh. 54 (1), 3–4 (2010).
E. N. Kablov, V. N. Kirillov, A. D. Zhirnov, et al., Aviats. Promyshl., No. 4, 36–46 (2009).
E. N. Kablov, B. V. Shchetanov, Yu. A. Ivakhnenko, and Yu. A. Balinova, Tr. VIAM, No. 2, 5 (2013).
D. V. Grashchenkov and L. V. Chursova, “Strategy of development of composite and functional materials,” Aviats. Mater. Tekhnol. 231–242 (2012).
M. M. Grigor’ev, A. V. Khrul’kov, Ya. M. Gurevich, and N. N. Panina, Tr. VIAM, No. 2, Art. 04 (2014). www.viam-works.ru
R. R. Mukhametov, K. R. Akhmadieva, M. A. Kim, and A. N. Babin, “Melt binders for promising methods of manufacturing a new generation of PCM,” Aviats. Mater. Tekhnol. 260–265 (2012).
N. N. Panina, T. A. Grebeneva, Ya. M. Gurevich, et al., “Modification of epoxy binders using cycloaliphatic epoxy imides,” Polym. Sci. Ser. D 7 (2), 105–112 (2014).
A. Babin, Tr. VIAM, No. 4 (2013). www.viam-works.ru
L. V. Chursova, M. A. Kim, N. N. Panina, and E. P. Shvetsov, “Nanomodified epoxy binder for the construction industry,” Aviats. Mater. Tekhnol., No. 1, 40–47 (2013).
L. V. Chursova, A. E. Raskutin, Ya. M. Gurevich, and N. N. Panina, “Cold cure binderd for the construction industry,” Klei. Germetiki. Tekhnologii, No. 5, 40–44 (2012).
Organic Solvents. Physical Properties and Methods of Purification, Weisberger, A., Ed. (Interscience, New York, 1955).
G. L. Hagnauer and D. A. Dunn, J. Appl. Polym. Sci. 26 (6), 1837–1846 (1981).
T. F. Saunders, M. F. Levy, and J. F. Serino, J. Polym. Sci. Part A-I 5 (7), 1609–1617 (1967).
S. I. Kazakov, M. L. Kerber, and I. Yu. Gorbunova, Polym. Sci. Ser. A 47 (9), 942–947 (2005).
M. Fedtke, F. Domaratius, and A. Pfitzmann, Polym. Bull. 23 (4), 381–388 (1990).
A. Pfitzmann, K. Schlothauer, and M. Fedtke, Polym. Bull. 27 (1), 59–66 (1991).
J. Galy, D. Gulino, J. P. Pascault, and Q. T. Pham, Makromol. Chem. 188 (1), 7–19 (1987).
L. Wang, C. Wan, Y. Fu, et al., J. Electron. Mater. 43 (1), 132–136 (2014).
X. Liu, Ch. Zhao, A. Sudo, et al., J. Polym. Sci. Part A: Polym. Chem. 51 (16), 3470–3476 (2013).
X. Liu, A. Sudo, and T. Endo, J. Polym. Sci. Part A: Polym. Chem. 49 (1), 250–256 (2011).
T. Cuthner and B. Hammer, J. Appl. Polym. Sci. 50 (8), 1453–1459 (1993).
N. Poisson, A. Maazouz, H. Sautereau, et al., J. Appl. Polym. Sci. 69 (12), 2487–2497 (1998).
S. A. Zahir, Adv. Organic Coatings Sci. Technol., No. 4, 83–102 (1982).
M. Hayaty, H. Honarkar, and M. H. Beheshty, Iranian Polym. J. 22 (8), 591–598 (2013).
M. Hayaty and M. H. Beheshty, Polym. Adv. Technol. 22 (6), 1001–1006 (2011).
X. Liu, M. Kimura, A. Sudo, and T. Endo, J. Polym. Sci. Part A: Polym. Chem. 48 (23), 5298–5305 (2010).
C. Zhao, S. Wan, L. Wang, et al., J. Polym. Sci. Part A: Polym. Chem. 52 (3), 375–382 (2014).
Q. Wang, B. K. Storm, and L. P. Houmoller, J. Appl. Polym. Sci. 87 (14), 2295–2305 (2003).
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © L.V. Chursova, A.I. Tkachuk, N.N. Panina, Ya.M. Gurevich, A.N. Babin, G.V. Malkov, 2014, published in Klei. Germetiki. Tekhnologii, 2014, No. 8, pp. 2–12.
Rights and permissions
About this article
Cite this article
Chursova, L.V., Tkachuk, A.I., Panina, N.N. et al. A study of the mechanism of curing of the dicyandiamide-epoxydiane oligomer system in the presence of asymmetrical urea. Polym. Sci. Ser. D 8, 153–162 (2015). https://doi.org/10.1134/S1995421215020057
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1995421215020057