Abstract
Synthesis of heat-resistant polymers via the polycyclotrimerization reaction of cyanate esters, which is one of the most promising ways of designing a new generation of heat-resistant binders for composite materials, is under consideration. The characteristics of polycyanurate binders and polymer composite materials based on them capable of operating at temperatures of up to 220°C are given.
Similar content being viewed by others
References
R. R. Mukhametov, K. R. Akhmadieva, L. V. Chursova, and D. I. Kogan, “New polymeric binders for advanced methods of manufacturing of structural fibrous PCMs,” Aviats. Mater. Tekhnol., No. 2, 38–42 (2011).
R. R. Mukhametov, K. R. Akhmadieva, M. A. Kim, and A. N. Babin, in Aviation Materials and Technologies: Jubilee Scientific and Technical Collected Papers (VIAM, Moscow, 2012), pp. 260–265 [in Russian].
R. R. Mukhametov, Yu. I. Merkulova, and L. V. Chursova, “Thermoreactive polymer binders with a predicted level of rheological and deformation properties,” Polym. Sci. Ser. D, 5(4), 261–263 (2012).
E. V. Prokhorova and R. R. Mukhametov, Tr. VIAM, No. 9, 6 (2013).
N. F. Lukina and A. P. Petrova, “Adhesives for reusable space systems,” Tr. VIAM, No. 4 (2013).
G. M. Pogosyan, V. A. Pankratov, V. N. Zaplishnyi, and S. G. Matsoyan, Polytriazine (Izd. AN Arm. SSR, Yerevan, 1987) [in Russian].
Li Yuan, Aijuan Gu, and Guozheng Liang, Polym. Compos. 31(1), 136–144 (2010).
G. Anuradha, S. Rakesh, and M. Sarojadevi, Polym. Eng. Sci. 49(5), 889–895 (2009).
H. Kimura, K. Ohtsuka, and A. Matsumoto, Adv. Polym. Tech. 32(S1), E651–E659 (2013).
V. Viner, J. Appl. Polym. Sci. 128(3), 2208–2215 (2013).
M. R. Kessler, “Cyanate Ester Resins,” in Encyclopedia of Composites, 2nd ed. (Wiley, 2012), Vol. 1.
L. S. Jayakumari, P. S. Sampath, and M. Sarojadevi, J. Appl. Polym. Sci. 112(4), 2579–2587 (2009).
A. Ganesan and S. Muthusamy, Polym. Compos. 30(6), 782–790 (2009).
X. Sheng, R. Hanus, A. Bauer, and M. R. Kessler, J. Appl. Polym. Sci. (2013) (Online version of an article published before inclusion in the next issue of the magazine).
Li Yuan, Aijuan Gu, Guozheng Liang, et al., Polym. Eng. Sci. 52(11), 2443–2453 (2012).
M. I. Dushin, A. V. Khrul’kov, R. R. Mukhametov, and L. V. Chursova, “Characteristic features of manufacturing PCMs by pressure impregnation,” Aviats. Mater. Tekhnol., No. 1, 18–26 (2012).
M. I. Dushin, A. V. Khrul’kov, and R. R. Mukhametov, Selection of technological parameters of autoclave molding parts of parts from polymer composites
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © R.R. Mukhametov, Yu.I. Merkulova, E.V. Dolgova, M.I. Dushin, 2014, published in Klei. Germetiki. Tekhnologii, 2014, No. 5, pp. 10–14.
Rights and permissions
About this article
Cite this article
Mukhametov, R.R., Merkulova, Y.I., Dolgova, E.V. et al. Synthesis of heat-resistant polymer matrices via polycyclotrimerization of cyanate esters. Polym. Sci. Ser. D 8, 22–26 (2015). https://doi.org/10.1134/S1995421215010104
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1995421215010104