Abstract
The change in the adhesive strength of resin-fiber compounds modified by polyarylene ether ketone in the process of curing is studied. It is shown that the dependence of adhesive strength on the time of curing is described by a curve with a maximum. The form of the curve results from the residual stresses that arise and develop at the interface. It is also shown that using the epoxy polymer blends makes it possible to markedly increase the strength of the matrix-fiber interface.
Similar content being viewed by others
References
Yu. A. Gorbatknna, I. Yu. Gorbunova, M. L. Kerber, and M. V. Shustov, Vysokomol. Soedin., Ser. A. 47(7), 1160–1168 (2005) [Pol. Sci. Ser. A: Pol. Phys. 47 (7), 716–722 (2005)].
V. V. Shaposhnikova, S. N. Salazkin, K. I. Donetskii, et al., Vysokomol. Soedin., Ser. A. 44(6), 925–932 (2002) [Pol. Sci. Ser. A: Pol. Phys. 44 (6), 563–569 (2002)].
V. V. Shaposhnikova, S. N. Salazkin, K. I. Donetskii, et al., Vysokomol. Soedin., Ser. A. 41(2), 217–225 (1999) [Pol. Sci. Ser. A: Pol. Phys. 41 (2), 124–131 (1999)].
S. N. Salazkin and K. I. Donetskii, Dokl. Akad. Nauk 362(6), 789–790 (1998).
Yu. A. Gorbatkina, Adhesive Strength in Fiber-Polymer Systems (Khimiya, Moscow, 1987) [in Russian].
Yu. A. Gorbatkina, Adhesive Strength of Fibre-Polymer System (Ellis Horwood, New York, 1992).
A. T. Sanzharovskii and G. I. Epifanov, Vysokomol. Soedin. 2(11), 1703 (1960).
A. I. Toroptseva, V. M. Belogorodskaya, and V. M. Bondarenko, A Practical Laboratory Course in the Chemistry and Technology of High-Molecular-Weight Compounds (Khimiya, Leningrad, 1972) [in Russian].
V. Miller, P. Muri, and L. Rebenfeld, Composites Sci. Technol., 28, 17–32 (1987).
U. Gaur and B. Miller, Composites Sci. Technol. 34, 35–51 (1989).
L. L. Qlan, F. A. Bruce, J. J. Kellar, and R. M. Winter, Meas. Sci. Technol. 6, 1009–1016 (1995).
M. R. Piggott, P. S. Chua, and D. Andison, Polym. Compos. 6, 242–248 (1985).
H. L. Cox, Brit. J. Appl. Phys. 3, 72–79 (1952).
A. Kelly and N. H. Macmillan, Strong Solids, 3rd ed. (Clarendon, Oxford, 1986).
F.-H. Leroy, M.-H. Auvray, and P.-M. Lesne, J. Mater. Sci. 30, 4651–4658 (1995).
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © Yu.A. Gorbatkina, I.Yu. Gorbunova, M.L. Kerber, 2010, published in Klei. Germetiki. Tekhnologii, 2010, No. 9, pp. 18–24.
Rights and permissions
About this article
Cite this article
Gorbatkina, Y.A., Gorbunova, I.Y. & Kerber, M.L. Change of adhesion properties of epoxy oligomer modified by polyarylene ether ketone in the process of curing. Polym. Sci. Ser. D 4, 95–101 (2011). https://doi.org/10.1134/S1995421211020079
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1995421211020079