Abstract
The problem of the stress-strain state and the strength of an adhesive model of reinforced polymer is solved via the contact-layer method, i.e., picking fiber from a polymer matrix. The influence of geometric and physical parameters of a model and test is investigated. The results of the calculations with the experiment are compared.
Similar content being viewed by others
References
R. A. Turusov and L. I. Manevich, Klei. Germetiki. Tekhnologii, No. 5, 2–8 (2009).
R. A. Turusov and L. I. Manevich, Klei. Germetiki. Tekhnologii, No. 6, 2–11 (2009).
R. A. Turusov and L. I. Manevich, Klei. Germetiki. Tekhnologii, No. 8, 2–12 (2009).
Yu. A. Gorbatkina, Adhesive Strength in Polymer-Fiber Systems (Khimiya, Moscow, 1987) [in Russian].
A. A. Berlin, S. A. Vol’fson, V. G. Oshmyan, and N. S. Enikolopov, Principles of Creation of Composite Polymer Materials (Khimiya, Moscow, 1990) [in Russian].
A. Ya. Gol’dman and A. L. Rabinovich, Physical Chemistry and mechanics of Oriented Glass Plastics (Nauka, Moscow, 1967) [in Russian].
A. V. Andreeva, Basics of Physical Chemistry and Technology of Composites (Radiotekhnika, Moscow, 2001) [in Russian].
A. S. Freidin and R. A. Turusov, Properties and Calculation of Adhesive Joints (Khimiya, Moscow, 1990) [in Russian].
F. Mett’yuz and R. Rolings, Composite Materials. Mechanics and Technology (Tekhnosfera, Moscow, 2004) [in Russian].
B. I. Panshin, Adhesives and Gluing Technology, Ed. by D.A. Kardashov (Oborongiz, Moscow, 1960) [in Russian].
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © R.A. Turusov, L.I. Manevich, 2009, published in Klei. Germetiki. Tekhnologii, 2009, No. 11, pp. 2–14.
Rights and permissions
About this article
Cite this article
Turusov, R.A., Manevich, L.I. Contact-layer method in adhesion mechanics: Picking fiber from a matrix. Polym. Sci. Ser. D 3, 75–86 (2010). https://doi.org/10.1134/S1995421210020012
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1995421210020012