Abstract
It is found that the preliminary delamination of the silicate filler allows one to achieve its high degree of exfoliation in the process of preparing polymer/layered silicate nanocomposites. It is shown using the example of various forms of montmorillonite, such as natural, intercalated with large [A113O4(OH)24(H2O)12]7+ Keggin ions, and pillared, that polyvinyl alcohol/montmorillonite nanocomposite films show much higher strength characteristics in the case of using a delaminated silicate component. According to the data of small angle X-ray diffraction studies, the almost complete exfoliation of silicate layers is observed, particularly for delaminated forms of montmorillonite. The thermal stability of the composites slightly decreases in comparison with pure PVA.
Similar content being viewed by others
References
Yiu-Wing Mai and Zhong-Zhen Yu, Polymer Nanocomposites (Woodhead Publ., Cambridge, 2006).
F. Bergaya, C. Detellier, J.-F. Lambert, and G. Lagaly, “Introduction to clay-polymer nanocomposites (CPN),” in Handbook of Clay Science, 2nd ed.: Developments in Clay Science (Elsevier, Amsterdam, 2013), Vol. 5A, p. 655.
M. Alexandre and P. Dubois, Mater. Sci. Eng., No. 28, 1 (2000).
E. P. Giannelis, Adv. Mater., No. 8, 29 (1996).
P. C. LeBaron, Z. Wang, and T. J. Pinnavaia, Appl. Clay Sci., No. 15, 11 (1999).
F. Bergaya and J.-F. Lambert, “Smectite-polymer nanocomposites,” in Handbook of Clay Science, 2nd ed.: Developments in Clay Science (Elsevier, Amsterdam, 2013), Vol. 5A, p. 679.
H. Fischer, Mater. Sci. Eng. C 23, 763 (2003).
R. A. Vaia and H. D. Wagner, Mater. Today 7, 32 (2004).
F. Bergaya, M. Jaber, and J. F. Lambert, “Clays and clay minerals,” in Rubber-Clay Nanocomposites. Science, Technology, and Applications, Ed. by M. Galimberti (Wiley, New York, 2011), Chapter 1, p. 3.
F. Bergaya, M. Jaber, and J. F. Lambert, “Clays and clay minerals as layered nanofillers for (bio) polymers,” in Environmental Silicates Nano-Biocomposites, Green Energy and Technology, Ed. by L. Averous and E. Pollet (Springer-Verlag, London, 2012), p. 41.
K. E. Strawhecker and E. Manias, Chem. Mater., No. 12, 2943 (2000).
M. F. Butman, N. L. Ovchinnikov, V. V. Arbuznikov, and A. V. Agafonov, Izv. Vyssh. Uchebn. Zaved., Khim. Khim. Tekhnol. 8(55), 73 (2012).
V. V. Nasedkin, Dash-Salakhli Bentonite Deposition (Development and Trends) (GEOS, Moscow, 2008) [in Russian].
E. I. Barg, Synthetic Plastics Technology (Lengoskhimizdat, Leningrad, 1954) [in Russian].
I. Yu. Goryainov, V. F. Kablov, I. Ya. Shipovskii, S. N. Bondarenko, N. A. Keibal, and I. Yu. Tovt, RF Patent No. 2362790 RF, IPC S 08 L 29/04, C 08 J 5/18, C 08 F 8/40, Byull. Izobret., No. 21 (2009).
C. Zhao, H. Qin, F. Gong, M. Feng, S. Zhang, and M. Yang, Polym. Degrad. Stab. 87, 183 (2005).
R. D. Davis, J. W. Gilman, and D. L. VanderHart, Polym. Degrad. Stabil 79, 111 (2003).
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.G. Belozerov, N.S. Karasev, N.L. Ovchinnikov, M.F. Butman, 2014, published in Rossiiskie Nanotekhnologii, 2014, Vol. 9, Nos. 7–8.
Rights and permissions
About this article
Cite this article
Belozerov, A.G., Karasev, N.S., Ovchinnikov, N.L. et al. The effect of preliminary delamination of silicate filler on its exfoliation degree in polyvinyl alcohol/montmorillonite nanocomposites. Nanotechnol Russia 9, 410–415 (2014). https://doi.org/10.1134/S1995078014040053
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1995078014040053