Abstract
The paper presents the results of a study of heat transfer in a falling film of freon R21 on a single-row bundle of horizontal tubes made of aluminum alloys with outer diameters of 10 mm and modified oxide porous coatings. The oxide coatings were deposited by micro-arc oxidation (MAO) in phosphate, acid, and silicate-alkaline electrolytes. The surface modification of the MAO coatings consisted in the deposition of copper particles in a solution of copper sulphate. The heat transfer coefficients for the modified MAO coatings were compared with the results for the surface of tubes with base MAO coatings in electrolytes of similar compositions, as well as for a smooth metal tube without coating for Reynolds numbers of the falling film varying from 600 to 1500. Additional surface treatment of the porous ceramic coatings by the deposition of copper particles has led to a significant decrease in the heat transfer coefficients in the falling film compared with the base MAO coatings. The highest enhancement of the heat transfer relative to the case of the smooth tube (of up to 80%) was obtained on the modified MAO coating deposited in the phosphate electrolyte.
REFERENCES
Dedov, A.V., A Review of Modern Methods for Enhancing Nucleate Boiling Heat Transfer, Therm. Eng., 2019, vol. 66, no. 12, pp. 881–915; DOI:10.1134/S0040601519120012
Volodin, O.A., Pecherkin, N.I., and Pavlenko, A.N., Heat Transfer Enhancement at Boiling and Evaporation of Liquids on Modified Surfaces—A Review, High Temp., 2021, vol. 59, nos. 2–6, pp. 405–432; DOI:10.1134/S0018151X21020140
Kim, D.E., Yu, D.I., Jerng, D.W., Kim, M.H., and Ahn, H.S., Review of Boiling Heat Transfer Enhancement on Micro/Nanostructured Surfaces, Exp. Therm. Fluid Sci., 2015, vol. 66, pp. 173–196; https://doi.org/10.1016/j.expthermflusci.2015.03.023.
Khan, S.A., Atieh, M.A., and Koç, M., Micro-Nano Scale Surface Coating for Nucleate Boiling Heat Transfer: A Critical Review, Energies, 2018, vol. 11, p. 3189; DOI:10.3390/en11113189
Chen, J., Ahmad, Sh., Cai, J., Liu, H., Lau, K.T., and Zhao, J., Latest Progress on Nanotechnology Aided Boiling Heat Transfer Enhancement: A Review, Energy, 2021, vol. 215, prt. A, p. 119114; https://doi.org/10.1016/j.energy.2020.119114.
Liang, G. and Mudawar, I., Review of Nanoscale Boiling Enhancement Techniques and Proposed Systematic Testing Strategy to Ensure Cooling Reliability and Repeatability, Appl. Thermal Eng., 2021, vol. 184, p. 115982; https://doi.org/10.1016/j.applthermaleng.2020.115982.
Upot, N., Fazle Rabbi, K., Khodakarami, S., Ho, J.Y., Kohler Mendizabal, J., and Miljkovic, N., Advances in Micro and Nanoengineered Surfaces for Enhancing Boiling and Condensation Heat Transfer: A Review, Nanoscale Adv., 2023, vol. 5, pp. 1232–1270; DOI:10.1039/d2na00669c
Serdyukov, V.S., Volodin, O.A., Bessmeltsev, V.P., and Pavlenko, A.N., Heat Transfer Enhancement during Pool Water Boiling Using 3D Printed Capillary-Porous Coatings, J. Eng. Therm., 2022, vol. 31, no. 2, pp. 201–209; DOI.org/10.1134/S1810232822020011
Pavlenko, A.N., Kuznetsov, D.V., and Bessmeltsev, V.P., Experimental Study on Heat Transfer and Critical Heat Flux during Pool Boiling of Nitrogen on 3D Printed Structured Copper Capillary-Porous Coatings, J. Eng. Therm., 2021, vol. 30, no. 3, pp. 341–349; https://doi.org/10.1134/S1810232821030012.
Volodin, O.A., Pecherkin, N.I., and Pavlenko, A.N., Heat Transfer Enhancement at Evaporation and Boiling of Liquid on Capillary-Porous Surfaces Created by 3D Printing, J. Phys.: Conf. Ser., 2021, vol. 2119, no. 1, p. 012075; https://doi.org/10.1088/1742-6596/2119/1/012075.
Suminov, I.V., Epel’fel’d, A.V., Lyudin, V.B., Krit, B.L., and Borisov, A.M., Mikrodugovoe oksidirovanie: teoriya, tekhnologiya, oborudovanie (Micro-Arc Oxidation: Theory, Technology, and Equipment), Moscow: Ekomet, 2005, chs. 2, 4, and 5.
Alykretsky, R.V., Ravodina, D.V., Trushkina, T.V., Vakhteev, E.V., and Alekseeva, E.G., Antierosion Coatings Development for Power Units of Space Crafts; Network Sci. Periodic Publ., 2014, vol. 74, pp. 29–30; http://trudymai.ru/eng/published.php?ID=49348.
Xi, K., Wu, H., Zhou, C., Qi, Z., Yang, K., Fu, R.K.Y., Xiao, S., Wu, G., Ding, K., Chen, G., and Chu, P.K., Improved Corrosion and Wear Resistance of Micro-Arc Oxidation Coatings on the 2024 Aluminum Alloy by Incorporation of Quasi-Two-Dimensional Sericite Microplates, Appl. Surface Sci., 2022. vol. 585, p. 152693; https://doi.org/10.1016/j.apsusc.2022.152693.
Nikiforov, A.A., Nikiforova, G.L., Terleeva, O.P., Slonova, A.I., Eshchenko, V.N., and Li, D.K., Device for Micro-Electric Arc Oxidation, RF Patent C1 2248416, 2005.
Miheev, A.E., Girn, A.V., Alykretsky, R.V., Ravodina, D.V., and Trushkina, T.V., Study of Emissivity Infrared Heaters Coated with MAO Coating, Vestnik SibGAU, 2014, vol. 54, no. 2, pp. 132–137.
Zhukov, V.M., Elagina, O.Yu., Kuzma-Kichta, Yu.A., Lavrikov, A.V., Lenkov, V.A., Slobodyannikov, B.A., and Stenina, N.A., Heat Transfer Intensification at Boiling of Liquid Nitrogen by Applying Submicron Ceramic Coatings on the Surface of Aluminum Alloy Bodies, Therm. Proc. Engin., 2014, vol. 6, no. 12, pp. 553–559.
Zhukov, V.M., Kuzma-Kichta, Yu.A., Lavrikov, A.V., Belov, K.I., and Lenkov, V.A., Heat Transfer Investigation at Boiling of Nitrogen and Freon 113 on a Sphere with Coating Based on Al2O3 Obtained by Microarc Oxidation, Therm. Proc. Engin., 2016, vol. 8, no. 8, pp. 363–360.
Zhukov, V.M., Kuzma-Kichta, Yu.A., Lavrikov, A.V., Belov, K.I., and Len’kov, V.A., Heat Transfer Enhancement at Boiling of Different Liquids on Spheres with Coatings Formed Using Micro-Arc Oxidation Technique, Therm. Proc. Engin., 2017, vol. 9, no. 12, pp. 537–543.
Vasil’ev, N.V., Varaksin, A.Yu., Zeigarnik, Yu.A., Khodakov, K.A., and Epel’fel’d, A.V., Characteristics of Subcooled Water Boiling on Structured Surfaces, High Temp., 2017, vol. 55, no. 6, pp. 880–886; https://doi.org/10.1134/S0018151X17060189.
Pavlenko, A.N., Pecherkin, N.I., Volodin, O.A., Kataev, A.I., and Mironova, I.B., Heat Transfer in the Falling Liquid Film on an Array of Horizontal Tubes with MAO Coating, J. Phys.: Conf. Ser., 2020, vol. 1677, p. 012091; DOI:10.1088/1742-6596/1677/1/012091
Pecherkin, N.I., Pavlenko, A.N., Volodin, O.A., Kataev, A.I., Mironova, I.B., and Das, M.K., Heat Transfer at Film Cooling of an Array of Horizontal Tubes with an Enhanced Surface, J. Phys.: Conf. Ser. (ICAE 2021), 2021, vol. 2096, p. 012141; DOI:10.1088/1742-6596/2096/1/012141
Pecherkin, N., Volodin, O., Pavlenko, A., Kataev, A., and Mironova, I., Heat Transfer Enhancement Experiments in R21 Falling Film over a Bundle of MAO-Coated Horizontal Tubes, Int. Comm. Heat Mass Transfer, 2021, vol. 129, p. 105743; https://doi.org/10.1016/j.icheatmasstransfer.2021.105743.
Pecherkin, N.I., Pavlenko, A.N., Volodin, O.A., Das, M.K., Kataev, A.I., and Mironova, I.B., Heat Transfer in Falling Films of R21 Refrigerant on a Single-Row Bundle of Horizontal Tubes with Porous Coatings, Proc. XXXVII Siberian Thermophysical Seminar (STS 37), 2021, 2021, p. 124.
Chun, K.R. and Seban, R.A., Heat Transfer to Evaporating Liquid Films, ASME J. Heat Transfer, 1971, vol. 94, no. 4, pp. 391–396.
Aladjev, I.T., Heat Transfer in Liquids at Convective Boiling in Tubes and at Pool Boiling, Teploenerg., 1963, no. 4, pp. 57–61.
Alhusseini, A.A., Tuzla, K., and Chen, J.C., Falling Film Evaporation of Single Component Liquids, Int. J. Heat Mass Transfer, 1998, vol. 41, no. 12, pp. 1623–1632.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Pecherkin, N.I., Pavlenko, A.N. & Volodin, O.A. Heat Transfer in a Falling Liquid Film of Freon R21 on an Array of Horizontal Tubes with Modified MAO Coatings. J. Engin. Thermophys. 32, 196–207 (2023). https://doi.org/10.1134/S1810232823020029
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1810232823020029