Abstract
Poly(imide ether sulphone) as novel high-performance polymer has been obtained by the condensation polymerization of 4,4'-bis(4-fluorophthalimido) diphenyl ether with 4,4'-sulfonyldiphenol via aromatic nucleophilic substitution reaction. Its structure was confirmed by means of FTIR and NMR spectroscopy, elemental analysis. Differential scanning calorimetry and thermal analysis measurements showed that synthesized polymer possessed high glass transition temperature (T g = 210°C) and good thermal stability with high decomposition temperatures (T d > 480°C). Prepared polymer film showed good light transmittance and mechanical strength.
Similar content being viewed by others
References
P. E. Cassidy, Thermally Stable Polymers. Synthesis and Characterization (Marcel Dekker, New York, 1980).
J. Preston, in Encyclopedia of Polymer Science and Engineering, Ed. by H. F. Mark, 2nd ed. (Wiley-Interscience, NewYork, 1988), vol. 11, p. 381.
G. J. Chang, X. Luo, L. Zhang, and R. X. Lin, Macromolecules 40, 8625 (2007).
G. M. Jiang, X. Jiang, and Y. F. Zhu, Polym. Int. 59 7, 896 (2010).
G. J. Chang, L. Yang, S. Y. Liu, R. X. Lin, and J. S. You, Polym. Chem. 6, 697 (2015).
Y. Watanabe, Y. Shibasaki, S. Ando, and M. Ueda, Polym. J. 38, 79 (2006).
G. Chang, Z. F. Shang, and L. Yang, J. Power Sources 282, 401 (2015).
K. Hwang, J. H. Kim, S. Y. Kim, and H. Byun, Energies 7, 1721 (2014).
G. J. Chang, L. Yang, J. X. Yang, Y. W. Huang, L. Zhang, and R. X. Lin, J. Polym. Sci., Part A: Polym. Chem. 52, 313 (2014).
J. C. Feng, G. A. Wen, and W. Huang, Polym. Degrad. Stab. 91,12 (2006).
M. X. Ding, Prog. Polym. Sci. 32, 623 (2007).
P. Gurr, J. Scofield, J. Kim, Q. Fu, S. E. Kentish, and G. G. Qiao, J. Polym. Sci., Part A: Polym. Chem. 52, 3372 (2014).
Y. J. Cho and H. B. Park, Macromol. Rapid Commun. 32, 579 (2011).
I. Sava, S. Chisca, A. Grabczyk, A. Jankowski, M. Sava, E. Grabiec, and M. Bruma, Polym. Int. 64, 154 (2015).
S. H. Hsiao and S. L. Cheng, Polym. Int. 64, 811 (2015).
S. G. Hahm, T. J. Lee, and M. Ree, Adv. Funct. Mater. 17, 1359 (2007).
D. P. Erhard, F. Richter, C. Bartz, and H. W. Schmidt, Macromol. Rapid Commun. 36, 520 (2015).
H. J. Yen, S. M. Guo, J. M. Yeh, and G. S. Liou, J. Polym. Sci., Part A: Polym. Chem. 49, 3637 (2011).
J. N. Hay, Thermochim. Acta 256, 123 (1995).
C. Morfopoulou, A. K. Andreopoulou, and J. K. Kallitsis, J. Polym. Sci., Part A: Polym. Chem. 49, 4325 (2011).
A. A. Asif, B. John, V. L. Rao, and K. N. Ninan, Polym. Int. 59, 986 (2010).
X. Miao, Y. Meng, and X. Li, J. Appl. Polym. Sci. 132, 41910 (2015).
Z. Z. Huang, L. M. Yu, S. R. Sheng, W. W. Ge, X. L. Liu, and C. S. Song, J. Appl. Polym. Sci. 108, 1049 (2008).
V. L. Rao, J. Macromol. Sci., Part C: Polym. Rev. 39 4, 655 (1999).
M. Barikani and S. Mehdipour-ataei, J. Polym. Sci., Part A: Polym. Chem. 38, 1487 (2000).
S. Mehdipour-ataei, Eur. Polym. J. 41, 91 (2005).
M. S. Jung, T. Kim, Y. J. Yoon, C. G. Kang, D. M. Yu, J. Y. Lee, H. Kim, and Y. T. Hong, J. Membr. Sci. 459, 72 (2014).
S. Fu, E. S. Sanders, S. S. Kulkarni, G. B. Wenz, and W. J. Koros, Carbon 95, 995 (2015).
Author information
Authors and Affiliations
Corresponding author
Additional information
The article is published in the original.
Rights and permissions
About this article
Cite this article
Chang, G., Wang, Q., Xiong, L. et al. Poly(imide ether sulphone) as new soluble high performance polymer. Polym. Sci. Ser. B 58, 329–333 (2016). https://doi.org/10.1134/S1560090416030039
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1560090416030039