Abstract
An electron accelerator in which magnetron guns with secondary-emission cathodes of two types are used as a particle source is described. The electron-beam parameters are investigated in an electron energy range of 20–150 keV at a pulse length of 10–50 μs. Results of target irradiation by an electron beam are represented. The target surface structure is studied by the metallographic method, and the microhardness and strength of zirconium materials are measured. The possibility of beam current control by factors of 2.5–3.5 with various methods is shown.
Similar content being viewed by others
References
V. Engelko, G. Mueller, A. Andreev, et al., “Pulsed electron beam facilities (GESA) for surface treatment of materials,” in Proc. of 10th Int. Conf. on Applied Charged Particle Accelerators in Medicine and Industry (St. Petersburg, 2001), p. 412.
A. N. Dovbnya, V. V. Zakutin, N. G. Reshetnyak, et al., “Investigation of beam formation in an electron accelerator with the secondary-emission cathode,” Vest. Khar’kov. Univ., Ser. Fiz.: Yadra, Chastitsy, Polya, No. 732, 30(2), 96 (2006).
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © N.I. Aizatsky, A.N. Dovbnya, V.V. Zakutin, N.G. Reshetnyak, V.P. Romas’ko, I.A. Chertishchev, V.N. Boriskin, N.A. Dovbnya, 2014, published in Pis’ma v Zhurnal Fizika Elementarnykh Chastits i Atomnogo Yadra, 2014.
Rights and permissions
About this article
Cite this article
Aizatsky, N.I., Dovbnya, A.N., Zakutin, V.V. et al. Generation and control of a powerful electron-beam current in an accelerator based on a secondary-emission source and its application. Phys. Part. Nuclei Lett. 11, 647–650 (2014). https://doi.org/10.1134/S1547477114050033
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1547477114050033