Abstract
The results of a study of the characteristics of aramid prepregs obtained from melt binders and organoplastics based on these prepregs are shown. The use of melt binders instead of solvent ones ensures the environmental safety of the production of aramid prepregs, increases the resistance of organoplastics to moisture and other environmental factors, the tightness of thin-sheet casing, as well as the possibility of combining aramid prepregs with modern carbon fiber prepregs to create hybrid designs.
Similar content being viewed by others
REFERENCES
Kablov, E.N., Metally Evrazii, 2012, no. 3, pp. 10–15..
Kablov, E.N., Intellekt Tekhnologii, 2016, no. 2(14), pp. 16–21..
Kablov, E.N., Aviats. Mater. Tekhnol., 2015, vol. 1, no. 1, pp. 3–33. https://doi.org/10.18577/2071-9140-2015-0-1-3-33
Kablov, E.N., Vestn. RAN, 2012, vol. 82, no. 6, pp. 520–530..
Li, C.-S., Zhan, M.-S., Huag, X.-C., Zhou, H., and Li, Y., J. Appl. Polym. Sci., 2013, vol. 128, no. 2, pp. 1291–1296..
Derombise, G., Chailleux, E., Forest, B., Riou, L., Lacotte, N., Vouyovitch Van Schoors, L., and Davies, P., Polym. Eng. Sci., 2011, vol. 51, no. 7, pp. 1366–1375..
Zhelezina, G.F., Gulyaev, I.N., and Solov’eva, N.A., Aviats. Mater. Tekhnol., 2017, no. S, pp. 368–378. https://doi.org/10.18577/2071-9140-2017-0-S-368-378
Raskutin, A.E. and Sokolov, I.I., Tr. VIAM: Elektron. Nauch.-Tekhn. Zh., 2013, no. 4, p. 9.
Zhelezina, G.F., Tr. VIAM: Elektron. Nauch.-Tekhn. Zh., 2013, no. 4, p. 6.
Avilova, I.A., Buznik, V.M., Volkov, V.I., Zhelezina, G.F., Morozov, E.V., Raskutin, A.E., and Falaleev, O.V., Aviats. Mater. Tekhnol., 2014, no. S1, pp. 30–36..
Tikhonov, I.V., Tokarev, A.V., Shorin, S.V., Shchetinin, V.M., Chernykh, T.E., and Bova, V.G., Fibre Chem., 2013, no. 5, pp. 1–8..
Mukhametov, R.R., Akhmadieva, K.R., Kim, M.A., and Babin, A.N., Aviats. Mater. Tekhnol., 2012, no. S, pp. 260–265..
Timoshkov, P.N. and Khrul’kov, A.V., Tr. VIAM: Elektron. Nauch.-Tekhn. Zh., 2014, vol. 1, no. 8, p. 4. https://doi.org/10.18577/2307-6046-2014-0-8-4-4
Langston, P., SAE Technical Paper 850893, US: SAE International, 1985. https://doi.org/10.4271/850893
Kalaiyarsan, A. and Ramesh, P., Int. J. Sci. Res. Mechan. Mater. Eng., 2018, vol. 2, no. 1, pp. 8–17.
Kulagina, G.S., Zhelezina, G.F., Tikhonov, I.V., and Doriomedov, M.S., Abstracts of Papers, Vseros. nauch.-tekhn. konf. “Polimernye kompozitsionnye materialy i proizvodstvennye tekhnologii novogo pokoleniya” (All-Russian Sci. Tech. Conf. on Polymeric Composite Materials and Production Technology of New Generation), Moscow: FGUP VIAM, 2017.
Zhelezina, G.F., Solov’eva, N.A., Makrushin, K.V., and Rysin, L.S., Aviats. Mater. Tekhnol., 2018, no. 1, pp. 58–63. https://doi.org/10.18577/2071-9140-2018-0-1-58-63
Zhelezina, G.F., Voinov, S.I., Chernykh, T.E., and Chernykh K. Yu., Vopr. Materialovedeniya, 2015, no. 1(81), pp. 60–72.
Zhelezina, G.F., Tikhonov, I.V., Chernykh, T.E., and Bova, V.G., Voinov, S.I., Plast. massy, 2019, no. 3–4, pp. 43–46.
Shul’deshova, P.M. and Zhelezina, G.F., Aviats. Mater. Tekhnol., 2014, no. 1, pp. 64–68. https://doi.org/10.18577/2071-9140-2014-0-1-64-68
Zhelezina, G.F. and Shuldeshova, P.M., Polym. Sci. Ser. D, 2014, no. 7, pp. 172–176.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
CONFLICT OF INTERESTS
The authors declare that they have no conflict of interest.
Rights and permissions
About this article
Cite this article
Zhelezina, G.F., Voinov, S.I., Kulagina, G.S. et al. Experience of Use of Melt Polymeric Binders for the Manufacture of Prepregs of Organoplastics. Russ J Appl Chem 93, 393–399 (2020). https://doi.org/10.1134/S1070427220030118
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1070427220030118