Abstract
Polyetherhydroxylurethane elastomers were prepared from mixtures of epoxy urethane oligomers and diglycidyl urethane, synthesized using isophorone diisocyanate, and the properties of the products obtained were studied. Calorimetric and optical microscopic studies proved the heterogeneity of the materials obtained. These materials surpass in the strength and adhesion characteristics the analogs synthesized using toluene-2,4-diisocyanate.
Similar content being viewed by others
References
Ling, Z., Hyun, K.J., Jeff, M., Ron, H., and Christopher, W.M., Polymer, 2007, vol. 48, pp. 6656–6667. https://doi.org/10.1016/j.polymer.2007.09.016
Mekewi, M.A., Ramadan, A.M., ElDarse, F.M., Abdel Rehim, M.H., Mosa, N.A., and Ibrahim, M.A., Egypt. J. Petrol., 2017, vol. 26, no. 1, pp. 9–15. https://doi.org/10.1016/j.ejpe.2016.02.002
Randall, D. and Lee, S., The Polyurethanes Book, New York: Wiley, 2003, pp. 203–285.
Prisakariu, C., Polyurethane Elastomers, from Morphology to Mechanical Aspects, Vienna: Springer, 2011, pp. 103–202.
Sun, W., Yan, X., and Zhu, X., Polym. Bull., 2012, vol. 69, no. 5, pp. 621–633. https://doi.org/10.1007/s00289-012-0775-1
Edwards, P.A., Striemer, G., and Webster, D.C., J. Coat. Technol. Res., 2005, vol. 2, no. 7, pp. 517–527. https://doi.org/10.1007/s11998-005-0011-0
Yeganeh, H., Mehdipour-Ataei, S., and Ghaffari, M., High Perform. Polym., 2008, vol. 20, no. 2, pp. 126–145. https://doi.org/10.1177/0954008307082743
Bera, M., Gupta, P., and Maji, P.K., React. Funct. Polym., 2019, vol. 139, pp. 60–74. https://doi.org/10.1016/j.reactfunctpolym.2019.03.008
Patent RU 2291176, Publ. 2007.
Sidorov, O.I., Milekhin, Yu.M., Matveev, A.A., Poisova, T.P., Bykova, K.A., and Sadchikov, N.V., Klei. Germet. Tekhnol., 2012, no. 9, pp. 15–21.
Elchueva, A.D., Nazipov, M.M., Tabachkov, A.A., and Liakumovich, A.G., Russ. J. Appl. Chem., 2003., vol. 76, no. 3, pp. 487–490. https://doi.org/10.1023/A:1025681524423
Skripinets, A.V., Danchenko, Yu.M., and Kabus’, A.V., Vost.-Evr. Zh. Pered. Tekhnol., 2015, vol. 3, no. 11, pp. 4–8.
Fedoseev, M.S., Tereshatov, V.V., and Derzhavinskaya, L.F., Russ. J. Appl. Chem., 2010, vol. 83, no. 8, pp. 1367–1371. https://doi.org/10.1134/S1070427210080070
Strel’nikov, V.N., Senichev, V.Yu., Slobodinyuk, A.I., Savchuk, A.V., Volkova, E.R., Makarova, M.A., Belov, Yu.L., Derzhavinskaya, L.F., and Selivanova, D.G., Russ. J. Appl. Chem., 2018, vol. 91, no. 12, pp. 1937–1944. https://doi.org/10.1134/S1070427218120042
Tereshatov, V.V., Makarova, M.A., Senichev, V.Yu., Volkova, E.R., Vnutskikh, Zh.A., and Slobodinyuk, A.I., Colloid Polym. Sci., 2015, vol. 293, no. 1, pp. 153–164. https://doi.org/10.1007/s00396-014-3395-5
Valuev, V.I., Romanovskii, G.K., Safronova, T.V., and Bogatyreva, S.A., Vysokomol. Soedin., Ser. B, 1988, vol. 30, no. 5, pp. 354–356.
Li, C.Y., Chen, J.H., Chien, P.C., Chiu, W.Y., Chen, R.S., and Don, T.M., Polym. Eng. Sci., 2007, vol. 47, no. 5, pp. 625–632. https://doi.org/10.1002/pen.20734
Chen, W.H., Chen, P.C., Wang, S.C., Yeh, J.T., Huang, C.Y., and Chen, K.N., J. Polym. Res., 2009, vol. 16, pp. 601–630. https://doi.org/10.1007/s10965-008-9265-4
Madhavan, K. and Reddy, B.S.R., J. Polym. Sci., Part A: Polym. Chem., 2006, vol. 44, no. 9, pp. 2980–2989. https://doi.org/10.1002/pola.21401
Garcia, F.G., Leyva, M.E., de Queiroz, A.A.A., and Simoes, A.Z., Int. J. Adhes. Adhes., 2011, vol. 31, no. 4, pp. 177–181. https://doi.org/10.1016/j.ijadhadh.2011.01.002
Cakić, S.M., Ristić, I.S., Jašo, V.M., Radičević, R.Ž., Ilić, O.Z., and Simendić, J.K., Prog. Org. Coat., 2012, vol. 73, no. 4, pp. 415–424. https://doi.org/10.1016/j.porgcoat.2011.03.016
Guadagno, L., Vertuccio, L., Sorrentino, A., Raimondo, M., Naddeo, C., Vittoria, V., Iannuzzo, G., Calv, E., and Russo, S., Carbon, 2009, vol. 47, no. 10, pp. 2419–2430. https://doi.org/10.1016/j.carbon.2009.04.035
Mathew, A., Kurmvanshi, S., Mohanty, S., and Nayak, S.K., Polym. Int., 2017. https://doi.org/10.1002/pi.5412
Huang, S.L. and Lai, A.J.Y., J. Membr. Sci., 1995, vol. 105, nos. 1–2, pp. 137–145. https://doi.org/10.1016/0376-7388(94)00319-T
Tereshatov, V.V., Vnutskikh, Zh.A., Slobodinyuk, A.I., Makarova, M.A., and Senichev, VYu., J. Elastom. Plast., 2016, vol. 48, no. 4, pp. 289–304. https://doi.org/10.1177/0095244315576240
Funding
The study was financially supported by the Ministry of Education and Science of the Russian Federation (agreement no. 14.604.21.0192, unique project identifier RFMEFI60417X0192).
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors declare that they have no conflict of interest.
Additional information
Russian Text © The Author(s), 2019, published in Zhurnal Prikladnoi Khimii, 2019, Vol. 92, No. 10, pp. 1244–1253.
Rights and permissions
About this article
Cite this article
Strel’nikov, V.N., Senichev, V.Y., Slobodinyuk, A.I. et al. Microheterogeneous Polyetherhydroxylurethane Elastomers with Controlled Phase Structure for Structural Adhesives. Russ J Appl Chem 92, 1342–1350 (2019). https://doi.org/10.1134/S1070427219100033
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1070427219100033