Abstract
Electrodeposition of tantalum coatings from molten salts onto nitinol substrates was studied in steady and pulsed modes. The adhesion of the tantalum coatings, their porosity, and the corrosion resistance, of the nitinol-tantalum composite were determined.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Shabalovskaya, S., Anderegg, J., and Van Humbeck, M., Acta Biomater., 2004, vol. 4, pp. 447–467.
Zelikman, A.N., Korshunov, B.G., Elyutin, A.V., and Zakharov, A.M., Niobii i tantal (Niobium and Tantalum), Moscow: Metallurgiya, 1990.
Revie, R.W. and Uhlig, H.H., Corrosion and Corrosion Control: An Introduction to Corrosion Science and Engineering, John Wiley & Sons, 2008
Wang, G., Shen, Y., Cao, Y., and Guidoin, R., IET Nanobiotech., 2007, vol. 1, pp. 102–106.
Cheng, Y., Cai, W., Li, H.T., and Zheng, Y.F., J. Mater. Sci., 2006, vol. 41, pp. 4961–4964.
Neiman, A.A., Meisner, L.L., Lotkov, A.I., et al., Perspekt. Mater., 2009, no. 1, pp. 51–56.
Konstantinov, V.I., Elektroliticheskoe poluchenie tantala, niobiya i ikh splavov (Electrolytic roduction of Tatalum, Niobium, and Alloys of These), Moscow: Metallurgiya, 1977.
Balikhin, V.S., Zashch. Met., 1974, vol. 10, no. 4, pp. 459–460.
Taxil, P. and Mahenc, J., Corros. Sci., 1981, vol. 1, pp. 31–40.
Gillesberg, B., Barner, J.H., Bjerrum, N.J., and Lantelme, F.J., Appl. Electrochem., 1999, vol. 29, pp. 939–949.
Kostin, N.A., Kublanovskii, V.S., and Zabludovskii, A.V., Impul’snyi elektroliz (Pulsed Electrolysis), Kiev: Naukova Dumka, 1989.
Bukatova, G.A., Kuznetsov, S.A., and Gaune-Escard, M., J. Min. Metall., Sect. B, 2003, vol. 39, pp. 251–259.
Kuznetsov, S.A., Hayashi, H., Minato, K., and Gaune-Escard, M., Electrochim. Acta, 2006, vol. 51, pp. 2463–2470.
Kuznetsov, S.A. and Gaune-Escard, M., J. Electroanal. Chem., 2006, vol. 595, pp. 11–22.
Kuznetsov, S.A., Glass Phys. Chem., 2014, vol. 40, pp. 119–123.
Nicholson, R.S. and Shain, J., Anal. Chem., 1964, vol. 36, no. 4, pp. 706–723.
Konstantinov, V.I., Polyakov, E.G., and Stangrit, P.T., Electrochim. Acta, 1978, vol. 23, pp. 713–716.
Kuznetsov, S.A., Russ. J. Electrochem., 1993, vol. 29, pp. 1154–1160.
Kuznetsov, S.A., Glagolevskaya, A.L., and Belyaevskii, A.T., Russ. J. Appl. Chem., 1994, vol. 67, no. 7, pp. 967–973.
Kuznetsov, S.A. and Glagolevskaya, A.L., Russ. J. Electrochem., 1996, vol. 32, no. 3, pp. 313–320.
Matsuda, H. and Ayabe, Y., Z. fur Electrochem., 1955, vol. 59, pp. 494–503.
Advances in Electrochemistry and Electrochemical Engineering, Delahay, P., Ed., New York: Wiley-Interscience, 1961.
Shunk, F.A., Constitution of Binary Alloys, New York: McGraw-Hill, 1969.
Baraboshkin, A.N., Elektrokristallizatsiya metallov iz rasplavlennykh solei (Electrocrystallization of Metals From Molten Salts), Moscow Nauka, 1976.
Erhardt, R.A., Tech. Proc. Am. Electroplat. Soc., 1960, vol. 47, pp. 78–82.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © E.A. Marenkova, A.I. Shamshurin, S.A. Kuznetsov, 2015, published in Zhurnal Prikladnoi Khimii, 2015, Vol. 88, No. 3, pp. 391–399.
Rights and permissions
About this article
Cite this article
Marenkova, E.A., Shamshurin, A.I. & Kuznetsov, S.A. Electrodeposition of tantalum coatings for corrosion protection of nitinol articles. Russ J Appl Chem 88, 398–406 (2015). https://doi.org/10.1134/S1070427215030064
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1070427215030064