Abstract
Copolymers of alkyl methacrylates with vinyl butyl ether were prepared by gradual addition of the active monomer to the inactive monomer. The resistance of these copolymers to mechanical degradation and their thickening power in petroleum oils were studied in comparison with those of the polyalkyl methacrylates used in industry. The influence of the molecular weight of the copolymers on the above characteristics was examined. The alkyl methacrylate-vinyl butyl ether copolymers exhibit enhanced resistance to mechanical degradation in a petroleum oil solution.
Similar content being viewed by others
References
Kuliev, A.M., Khimiya i tekhnologiya prisadok k maslam i toplivam (Chemistry and Technology of Additives to Oils and Fuels), Moscow: Khimiya, 1985.
Kaplan, S.Z. and Radzevenchuk, I.F., Vyazkostnye prisadki i zagushchennye masla (Viscosity Additives and Thickened Oils), Leningrad: Khimiya, 1982.
Motornye masla i zhidkosti (Engine Oil and Liquids), Papok, K.K. and Semenido, E.G., Ed., Moscow, Khimiya, 1964.
Akhmedov, A.I., Khim. Tekhnol. Topl. Masel, 1994, no. 1, pp. 26–28.
Ante, J., Marko, R., and Elvira, V., Polymer-Plastics Technol. Eng., 2010, vol. 49, no. 1, pp. 74–77.
Ghosh, P., Pantar, A.V., and Sarma, A.S., Indian J. Chem. Technol., 1998, vol. 5, pp. 371–375.
Akhmedov, A.I. and Buniyat-Zade, I.A., Khim. Tekhnol. Topl. Masel, 1997, no. 2, pp. 38–39.
Janović, Z., Juković, A., and Vilović, E., Khim. Tekhnol. Topl. Masel, 2009, no. 4, pp. 33–37.
Akhmedov, A.I., Gusein-Zade, S.M., Levshina, A.M., et al., Neftekhimiya, 1987, vol. 27, no. 4, pp. 563–566.
Akhmedov, A.I., Levshina, A.M., Rustamova, D.M., et al., Zh. Prikl. Khim., 1988, no. 6, pp. 1437–1439.
Akhmedov, A.I. and Levshina, A.M., Khim. Tekhnol. Topl. Masel, 1986, no. 6, pp. 26–27.
Akhmedov, A.I., Gasanova, E.I., Akchurina, T.Kh., et al., Russ. J. Appl. Chem., 2011, vol. 84, no. 4, pp. 676–678.
Jukić, A., Vidović, E., and Janović, Z., Khim. Tekhnol. Topl. Masel, 2007, no. 5, pp. 23–27.
Semenycheva, L.L., Bogatova, E.I., and Vins, V.V., Russ. J. Appl. Chem., 2008, vol. 81, no. 9, pp. 1638–1641.
Semenycheva, L.L., Vins, V.V., Bogatova, E.I., et al., Neftepererab. Neftekhim., 2008, no. 12, pp. 16–18.
Semenycheva, L.L., Vins, V.V., and Moikin, A.A., Vse materialy. Entsiklopedicheskii spravochnik (All Materials. Encyclopedia Handbook), 2012, no. 2, pp. 24–30.
USSR Inventor’s Certificate no. 810668, Byull. Izobret., 1981, no. 9.
GOST (State Standard) 20799-88: Industrial Oils.
GOST (State Standard) 17479.3-85: Hydraulic Oils.
GOST (State Standard) 33-2000: Petroluem Products: Transparent and Nontransparent Liquids: Determination of the Kinematic Viscosity and Calculation of the Dynamic Viscosity.
Topliva, smazochnye materialy, tekhnicheskie zhidkosti: Assortiment i primenenie: Spravochnik (Fuels, Lubricants, Technical Fluids: Assortment and Applications: Handbook), Shkol’nikov, V.M., Ed., Moscow: Tekhinform, 1999.
GOST (State Standard) 6794-75: AMG-10 Oil: Technical Specification.
Grassie, N. and Scott, G., Polymer Degradation and Stabilisation, Cambridge: Cambridge Univ., 1985.
Kuijpers, M., Iedema, P., Kemmere, M., and Keurentjes, J., Polymer, 2004, vol. 45, no. 19, pp. 6461–6467.
Daraboina, N. and Madras, G., Ultrasonics Sonochem., 2009, vol. 16, no. 2, pp. 273–279.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © L.L. Semenycheva, E.V. Geras’kina, O.A. Kazantsev, A.P. Sivokhin, A.A. Moikin, 2014, published in Zhurnal Prikladnoi Khimii, 2014, Vol. 87, No. 2, pp. 244–249.
Rights and permissions
About this article
Cite this article
Semenycheva, L.L., Geras’kina, E.V., Kazantsev, O.A. et al. Influence of the molecular weight on the properties of alkyl methacrylate-vinyl butyl ether copolymers as thickening additives to petroleum oils. Russ J Appl Chem 87, 224–229 (2014). https://doi.org/10.1134/S1070427214020177
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1070427214020177