Abstract
Results of a study of how the density and electrical conductivity of a Li7La3Zr2O12 ceramic depends on the sintering temperature were used to determine the optimal conditions for formation of the system under study as a solid electrolyte with a conductivity of 3.7 × 10−2 S cm−1 at 185°C for electrochemical devices.
Similar content being viewed by others
References
Murugan, R., Thangadurai, V., and Weppner, W., Angew. Chem. Int. Ed., 2007, vol. 46, p. 7778.
Kotobuki, M., Munakata, H., Kanamura, K., et al., J. Electrochem. Soc., 2010, vol. 157, p. A1076.
Awaka, J., Kijima, N., Hayakawa, H., and Akimoto, J., J. Solid State Chem., 2009, vol. 182, p. 2046.
Wolfenstine, J., Rangasamy, E., Allen, J.L., and Sakamoto, J., J. Power Sources, 2012, vol. 208, p. 193.
Il’ina, E.A., Andreev, O.L., Antonov, B.D., and Batalov, N.N., J. Power Sources, 2012, vol. 201, p. 169.
Ostroushko, A.A. and Mogil’nikov, Yu.V., Fizikokhimicheskie osnovy polucheniya tverdofaznykh materialov elektronnoi tekhniki (Physicochemical Foundations of Synthesis of Solid-Phase Materials for Electronics) [Electronic Resource].
Huang, M., Liu, T., and Deng, Y., Solid State Ionics, 2011, vols. 204–205, p. 41.
Kokal, I., Somer, M., and Notten, P.H.L., Solid State Ionics, 2011, vol. 185, p. 42.
Ivanov-Shits, A.K. and Murin, I.V., Ionika tverdogo tela (Solid-State Ionics), St. Petersburg: SPb. Gos. Univ., 2000, vol. 1.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © E.A. Il’ina, A.V. Aleksandrov, A.A. Raskovalov, N.N. Batalov, 2013, published in Zhurnal Prikladnoi Khimii, 2013, Vol. 86, No. 8, pp. 1250–1254.
Rights and permissions
About this article
Cite this article
Il’ina, E.A., Aleksandrov, A.V., Raskovalov, A.A. et al. Optimization of the preparation conditions of Li7La3Zr2O12 ceramic electrolyte for lithium power cells. Russ J Appl Chem 86, 1225–1229 (2013). https://doi.org/10.1134/S1070427213080120
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1070427213080120