Abstract
The technique of calculation of a feeding zone for a single screw extruder is developed taking into account the nonisothermal process and the actual boundary geometric conditions and speed conditions (the screw is rotated, the cylinder is fixed). An analysis of the influence of the screw geometry was performed and also of an effect of a ratio of friction coefficients of the processed material on the cylinder and worm, on a change in pressure and temperature of the processed material along the length of the feeding zone.
Similar content being viewed by others
References
Darnell, W.H. and Mol, E.H.J., Soc. Plast. Eng. J., 1956, no. 12, pp. 20–28.
Schenkel, G., Schneckenpressen fur Kunststoffe, Carl Hanser Verlag Monchen, 1959.
Ryabinin, D.D. and Lukach, Yu.E., Chervyachnye mashiny dlya pererabotki plasticheskikh mass i rezinovykh smesei (Screw Machines for Processing Plastics and Rubber Compounds), Moscow: Mashinostroenie, 1965.
Schneider, K., Die Vųrdervorgang in der Ein-sugssone eines Extruders: Diss., TH Aachen, 1968.
Goldacker, E., Untersuchungen sur inneren Reibung von Pulvern, insbesondere in Hin-blick auf die Vųrderung in Extrudern: Diss., TH Aachen, 1971.
Basov, N.I., Kazankov, Yu.V., and Lyubartovich, V.A., Raschet i konstruirovanie oborudovaniya dlya proizvodstva i pererabotki polimernykh materialov (Calculation and Sesign of Equipment for Production and Processing of Polymeric Materials), Moscow: Khimiya, 1986.
Kim, V.S., Teoriya i praktika ekstruzii polimerov (Theory and Practice of Extrusion of Polymers), Moscow: Khimiya, KolosS, 2005.
Vlasov, S.V., Kalinchev, E.L., Kandyrin L.B. et al., Osnovy tekhnologii pererabotki plastmass (Fundamentals of Technology and Processing Plastics), Kulezneva, V.N. and Guseva, V.K., Moscow: Khimiya, 2004.
Fischer, P., Auslegung von Einschneckenextru-dern auf der Grundlage verfahrenstechnischer Kenndaten — ein Beitrag zum Systematik im Kunststoffmaschinenbau: Diss., TH Aachen, 1976.
Mikulionok, I.O., Oborudovanie i protsessy pererabotki termoplastichnykh materialov s ispol’zovaniem vtorichnogo syr’ya (Equipment and Processes for the Processing of Thermoplastic Materials Using Recycled Materials), Kiyv: Izd. “Politekhnika,” 2009.
Mikulionok, I.O. and Radchenko, L.B., Russ. J. Appl. Chem., 2011, vol. 88, no. 6, pp. 281–296.
Wong, H., Handbook of Essential Formulae and Data on Heat Transfer for Engineers, Longman Group United Kingdom, 1977.
Radchenko, L.B. and Sivetskii, V. I., Osnovy modelirovaniya i konstruirovaniya chervyachnykh ekstruderov (Fundamentals of Modeling and Design of Worm Extruders), Kiyv: Izd. “Politekhnika,” 2002.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © I.O. Mikulionok, L.B. Radchenko, 2011, published in Khimicheskaya Promyshlennost’, 2011, Vol. 88, No. 7, pp. 325–334.
Rights and permissions
About this article
Cite this article
Mikulionok, I.O., Radchenko, L.B. Screw extrusion of thermoplastics: II. Simulation of feeding zone of the single screw extruder. Russ J Appl Chem 85, 505–514 (2012). https://doi.org/10.1134/S1070427211030317
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1070427211030317