Abstract
New approach to a simulation of single and twin screw extruders for thermoplastics processing was suggested. The approach takes into account real boundary geometric conditions and conditions on velocity (a screw is rotated, cylinder is fixed), and also that there exist phase transformations of the processed material and its heat exchange with surfaces of the screw and cylinder limiting the working channel of the extruder.
Similar content being viewed by others
References
Mikulenok, I.O., Oborudovanie i protsessy pererabotki termoplastichnykh materialov s ispol’zovaniem vtorichnogo syr’ya (Equipment and Processes for the Processing of Thermoplastic Materials Using Recycled Materials), Kiyv: Izd. “Politekhnika,” 2009.
Schenkel, G., Schneckenpressen fur Kunststoffe, Carl Hanser Verlag Monchen, 1959.
McKelvey, J.M., Polymer Processing, John Wiley & Sons Inc., 1962.
Ryabinin, D.D. and Lukach, Yu.E., Chervyachnye mashiny dlya pererabotki plasticheskikh mass i rezinovykh smesei (Screw Machines for Processing Plastics and Rubber Compounds), Moscow: Mashinostroenie, 1965.
Bernkhardt, E., Pererabotka termoplastichnykh materialov (Processing of Thermoplastic Materials), Moscow: Goskhimizdat, 1968.
Torner, R.V., Teoreticheskie osnovy pererabotki polimerov (mekhanika protsessov) [Theoretical Foundations of Polymer Processing (Mechanical Processes)], Moscow: Khimiya, 1977.
Tadmor, Z. and Gogos, C., Principles of Polymer Processing, Wiley-Interscience, 2006.
Basov, N.I., Kazankov, Yu.V., and Lyubartovich, V.A., Raschet i konstruirovanie oborudovaniya dlya proizvodstva i pererabotki polimernykh materialov (Calculation and Sesign of Equipment for Production and Processing of Polymeric Materials), Moscow: Khimiya, 1986.
Kim, V.S., Teoriya i praktika ekstruzii polimerov (Theory and Practice of Polymer Extrusion), Moscow: Khimiya, 2005.
Todd, D.B., Improving Incorporation of Fillers in Plastics. A Special Report, Adv. Polym. Technol., 2000, vol. 19, no. 1, pp. 54–64.
Radchenko, L. B., Pererabotka termoplastov metodom ekstruzii (Processing of Thermoplastics by Extrusion), Kiyv, 1999.
Mikulionok, I.O. and Radchenko, L.B., Pererabotka vtorichnogo syr’ya ekstruziei (Recycling Extrusion), Kiyv: Izd. “Politekhnika,” 2006.
Konstantinov, V.N. and Levin. A.N., Khimicheskoe i neftyanoe mashinostroenie, 1962, no. 3, pp. 18–22.
Konstantinov, V.N., Khimicheskoe i neftyanoe mashinostroenie, 1964, no. 2, pp. 21–26.
Voitushenko, P.A., Khimicheskoe mashinostroenie: resp. mezhved. nauchn.-tekhn. sb., Kiyv: Tekhnika, 1986, no. 43, pp. 7–11.
Wong, H., Handbook of Essential Formulae and Data on Heat Transfer for Engineers, Longman Group United Kingdom, 1977.
Grünschloß, E., Kunststoffe, 1987, vol. 77, no. 9, pp. 888–892.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © I.O. Mikulionok, L.B. Radchenko, 2011, published in Khimicheskaya Promyshlennost’, 2011, Vol. 88, No. 6, pp. 281–296.
Rights and permissions
About this article
Cite this article
Mikulionok, I.O., Radchenko, L.B. Screw extrusion of thermoplastics: I. General model of the screw extrusion. Russ J Appl Chem 85, 489–504 (2012). https://doi.org/10.1134/S1070427211030305
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1070427211030305