Abstract
The main dependence for determining the energy-power parameters of processing the compositions, whose behavior under load is described by a power rheological law in the operation gap of mixers with oval rotors. In the proposed method of calculating the power of the mixer drive motor an attempt was made to account for movement of a treated material not only in circular but also in the axial direction of the mixing chamber. These dependences for determining the pressure and power supplied to the rotors for rotation thereof may be recommended for engineering calculations of mixing equipment for plastics and rubber mixtures.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Ryabinin, D.D. and Lukach, Yu.E., Smesitel’nye mashiny dlya plastmass i rezinovykh smesei (Mixing Machines for Plastics and Rubber Compounds), Moscow: Mashinostroenie, 1972.
Tadmor, Z. and Gogos, C., Principles of Polymer Processing, Wiley-Interscience, 2006.
Bekin, N.G., Zakharov, N.D. Peunkov, G.K. et al., Oborudovanie i osnovy proektirovaniya zavodov rezinovoi promyshlennosti (Equipment and Principles of Design Works the Rubber Industry), Leningrad: Khimiya, 1985.
Basov, N.I., Kazankov, Yu.V., and Lyubartovich, V.A., Raschet i konstruirovanie oborudovaniya dlya proizvodstva i pererabotki polimernykh materialov (Calculation and Design of Equipment for Production and Processing of Polymeric Materials), Leningrad: Khimiya, 1986.
Torner, R.V. and Akutin, M.S., Oborudovanie zavodov po pererabotke plastmass (Equipment for Plastics Processing Plants), Moscow: Khimiya, 1986.
Bekin, N.G., Raschet tekhnologicheskikh parametrov i oborudovaniya dlya pererabotki rezinovykh smesei v izdeliya (Calculation of Process Parameters and Equipment for Processing Rubber Compounds in Products), Leningrad: Khimiya, 1987.
Vostroknutov, E.G., Novikov, M.I., Novikov, V.I. and Prozorovskaya, N.V., Pererabotka kauchukov i rezinovykh smesei (reologicheskie osnovy, tekhnologiya, oborudovanie) (Processing of Rubber and Rubber Blends: Rheology Fundamentals, Technology, Equipment), Moscow: Maksipress, 2005.
GOST 11996-79. Rubber batch mixers. General specifications.
Mikul’onok, I.O., Oborudovanie i protsessy pererabotki termoplastichnykh materialov s ispol’zovaniem vtorichnogo syr’ya (Equipment and Processes for the Processing Thermoplastic Materials Using Recycled Materials), Kiev: IVTs Izd. “Politekhnika,” 2009.
Radchenko, L.B., Pererobka termoplastiv metodom ekstruzii (Processing of Thermoplastics by Extrusion). Kiev: IZMN, 1999.
Torner, R.V. Teoreticheskie osnovy pererabotki polimerov (mekhanika protsessov) (Theoretical Foundations of Polymer Processing: Mechanical Processes), Moscow: Khimiya, 1977.
Slezkin, N.A., Dinamika vyazkoi neszhimaemoi zhidkosti (The Dynamics of Viscous Incompressible Fluid), Moscow: Gostekhizdat, 1955.
Metodika parametricheskogo i teplovogo rascheta polimerpererabatyvayushchikh kalandrov (Parametric Technique and Thermal Analysis of Polymer Processing Calenders), Mikulenok, I.O., Lukach, Yu.E., and Ruzhinskaya, Yu.E., Kiev: KPI, 1990.
Sbornik primerov i zadach po tekhnologii pererabotki plasticheskikh mass (Collection of Examples and Problems on the Technology of Processing of Plastics), Krasovskii, V.N. and Voskresenskii, A.M., Eds., Minsk: Vyshaya Shkola, 1975.
Bogdanov, V.V., Torner, R.V., Krasovskii, V.N., and Reger, E.O., Smeshenie polimerov (Polymer Mixing), Leningrad: Khimiya, 1979.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © I.O. Mikulionok, 2010, published in Khimicheskaya Promyshlennost’, 2010, Vol. 86, No. 6, pp. 306–316.
Rights and permissions
About this article
Cite this article
Mikulionok, I.O. Simulation of processing the “Power” composition in a mixer with oval rotors. Russ J Appl Chem 83, 2229–2239 (2010). https://doi.org/10.1134/S107042721012030X
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S107042721012030X