Abstract
The rigid polyurethane foam materials based on ODF-M complex oligoester filled by hollow silicaalumina microspheres with various surface nature were studied. Physical-mechanical properties of the obtained materials were studied.
References
Varlamova, L.P., Izvozchikova, V.A., Ryabov, S.A., et al., Zh. Prikl. Khim., 2008, vol. 81, no. 3, p. 502.
Shvetsova, L.N. and Kostenko, T.I., Prostye i slozhnye oligoefiry (Simple and Complex Oligoesters), Cherkassy: NIITEKhIM, 1981, p. 3.
Tarakanov, O.G., Shamov, I.V., and Al’pern, V.D., Napolnennye penoplasty (Filled Foam Plastics), Moscow: Khimiya, 1989, p. 29.
Platunov, I.S., Teplofizicheskie izmereniya v monotonnom rezhime (Thermophysical Measurings in a Monotonous Regimen), Leningrad: Energiya, 1973, p. 28.
Izvozchikova, V.A., Ryabov, S.A., and Varlamova, L.P., Vestnik Nizhegorod. Gos. Univ., 2007, no. 6, p. 56.
Author information
Authors and Affiliations
Additional information
Original Russian Text © L.P. Varlamova, V.K. Cherkasov, N.M. Semenov, V.A. Egorov, S.A. Ryabov, V.A. Izvozchikova, 2009, published in Zhurnal Prikladnoi Khimii, 2009, Vol. 82, No. 6, pp. 1040–1042.
Rights and permissions
About this article
Cite this article
Varlamova, L.P., Cherkasov, V.K., Semenov, N.M. et al. Effect of the modification of aluminosilicate ash microsphere surfaces on physical-mechanical properties of polyurethane foam. Russ J Appl Chem 82, 1098–1101 (2009). https://doi.org/10.1134/S1070427209060329
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1070427209060329