Abstract
Results of tribological studies of modern polymeric materials (thermoplastics, thermosetting materials, composites) used to fabricate water-lubricated bearings are considered. Particular attention is given to carbon-fiber-reinforced plastics modified with powdered metals, fullerene-containing additives, and carbon nanotubes.
Similar content being viewed by others
References
Smith, W.V., Wear, 1973, vol. 25, no. 1, pp. 139–153.
Smith, W.V. and Schneider, L.G., Naval Eng. J., 1963, vol. 75, no. 4, pp. 841–854.
Serre, I., Celati, N., and Pradeilles-Duval, R.M., Wear, 2002, vol. 252, no. 9–10, pp. 711–718.
Lizandier, M.F., Lanza, E., Sebaoum, A., et al., Wear, 1992, vol. 153, no. 2, pp. 387–397.
Ginzburg, B.M., Kireenko, O.F., Shepelevskii, A.A., et al., J. Macromol. Sci., Physics, 2005, vol. 44B, no. 1, pp. 93–115.
Rubin, M.B. and Bakhareva, V.E., Podshipniki v sudovoi tekhnike: Spravochnik (Bearings in Ship Technology: Reference Book), Moscow: Sudostroenie, 1987.
Sokov, E.V., Sudostroenie, 1997, no. 1, pp. 47–50.
Davydov, A.P., Rezinovye podshipniki v mashinostroenii (Rubber Bearings in Machine Building), Leningrad: Mashinostroenie. 1976.
Burenin, V.V., Khim. Neftegaz. Mashinostr., 2000, no. 3, pp. 52–54.
Orndorf, Jr. and Roy, L., Naval Eng. J., 1985, vol. 97, no. 7, pp. 39–52.
Zhang, S.W., Liu, H., and He, R., Wear, 2004, vol. 256, nos. 3–4, pp. 226–232.
Sagalaev, G.V. and Shtembel’, I.A., Trenie Iznos, 1982, vol. 3, no. 4, pp. 626–632.
Zamyatina, T.F., Mashkov, Yu.K., Surikov, V.I., et al., Plast. Massy, 1985, no. 8, pp. 56–57.
Gertsyk, M.A., Nikitin, V.A., Petrov, V.M., et al., Vopr. Materialoved., 2001, no. 2(26), pp. 148–156.
Vorontsov, P.A. and Semenov, A.P., Vestn. Mashinostr., 1996, no. 10, pp. 9–11.
Spravochnik po kompozitsionnym materialam (Reference Book of Composite Materials), Lyubin, J., Ed., Moscow: Mashinostroenie, 1988, vol. 2.
Sokov, E.V. and Lysenkov, P.M., Sudostroenie, 1995, nos. 2–3, pp. 42–45.
Lubenko, V.N., Improving the Reliability of Kaprolon Stern-Shaft Bearings for Fishing Ships, Doctoral Dissertation, St. Petersburg, 1996.
Kudryashov, Yu.A., Vopr. Materialoved., 2001, no. 2(26), pp. 116–118.
Ekologicheski chistaya podshipnikovaya sistema dlya deidvudnykh ustroistv: Tekhnicheskoe rukovodstvo (Environmentally Clean System of Bearings for Stern-Shaft Devices: Technical Manual), Barlington: Thordon, 1998, issue 3.0.
Advertising Information: Thordon Bearings for Polar Sea, Can. Ship. Marine Eng., 1986, vol. 57, no. 5, pp. 19.
Lhymn, C., Wear, 1988, vol. 122, no. 1, pp. 13–15.
Derzhavin, Yu.A., Nikitin, V.A., Petrov, V.M., et al., Problemy mashinovedeniya v mashinostroenii: Mezhvuzovskii sbornik (Materials Science Problems in Machine Building; Intercollegiate Coll. of Works), St. Petersburg: Sev.-Zap. Zaochn. Politekh. Inst., 2000, issue 21, pp. 79–87.
Cohen, S.C. and Tabor, D., Proc. Roy. Soc., 1966, vol. 291A, no. 1425, pp. 186–207.
Smith, W.V., J. Test. Polym., 1967, vol. 3, pp. 231–244.
Evans, D.C., The Wear of Nonmetallic Materials, Proc. Symp. Tribology, Mech. Eng. Publ., 1978, pp. 47–55.
Craig, W.D., Lubric. Eng., 1964, vol. 20, no. 12, pp. 456–462.
Lancaster, J.K., Wear, 1972, vol. 20, no. 3, pp. 315–333.
Tsukamoto, N., Mariyama, H., and Mimura, H., JSME Int. J., Ser. C, 1993, vol. 36, no. 4, pp. 499–506.
Lancaster, J.K., J. Phys. D. Ser. 2, 1968, vol. 1, no. 5, pp. 549–559.
Lancaster, J.K., Tribol. Int., 1990, vol. 23, pp. 380–390.
Senior, J.M. and West, G.H., Wear, 1971, vol. 18, no. 4, pp. 311–323.
Tanaka, K., Trans. ASME, J. Lubric. Technol., 1980, vol. 102, no. 4, pp. 526–533.
Mens, J.W.M. and Gee, A.W. de, Wear, 1991, vol. 149, nos. 1–2, pp. 255–268.
Kirilenko, V.P. and Zaitsev, A.L., Trenie Iznos, 2003, vol. 24, no. 3, pp. 289–294.
Zaitsev, A.L. and Kirilenko, V.P., Trenie Iznos, 2003, vol. 24, no. 2, pp. 210–215.
Kurokawa, M., Uchiyama, Y., Iwai, T., and Nagai, S., Wear, 2003, vol. 254, nos. 1–2, pp. 468–473.
McNicol, A., Dowson, D., and Davies, M., Wear, 1995, vols. 181–183, part 2, pp. 603–612.
Hu Xianguo, Polym.-Plast. Technol. Eng., 2000, vol. 39, no. 1, pp. 137–150.
Abozin, I.Yu., Bakhareva, V.E., Ginzburg, B.M., et al., Vopr. Materialoved., 2002, no. 3(31), pp. 58–67.
Abozin, I.Yu., Bakhareva, V.E., Ginzburg, B.M., and Tochil’nikov, D.G., Vopr. Materialoved., 2002, no. 3(31), pp. 68–72.
Scherge, M., Li, X., and Schaefer, J.A., Tribol. Lett., 1999, vol. 6, no. 2, pp. 215–220.
Hild, W., Opitz, A., Schaefer, J.A., and Scherge, M., Wear, 2003, vol. 254, no. 9, pp. 871–875.
Yamamoto, Y. and Takashima, T., Wear, 2002, vol. 253, nos. 7–8, pp. 820–827.
Yamamoto, Y. and Hashimoto, M., Wear, 2004, vol. 257, nos. 1–2, pp. 181–189.
Joyce, T.J., Vandelli, C., Cartwright, T., and Unsworth, A., Wear, 2001, vol. 250, nos. 1–12, pp. 206–211.
Gao, J., Mao, S., Liu, J., and Feng, D., Wear, 1997, vol. 212, no. 2, pp. 238–243.
Silva, C.N. da, Tanaka, D.K., and Sinatora, A., Wear, 1999, vols. 225–229, part 1, pp. 339–342.
Marcus, K. and Allen, C., Wear, 1994, vol. 178, no. 1, pp. 17–28.
Gong, D., Xue, Q., and Wang, H., Wear, 1989, vol. 134, no. 2, pp. 283–295.
Ginzburg, B.M. and Tochil’nikov, G.D., Zh. Tekh. Fiz., 2001, vol. 71, no. 2, pp. 120–124.
Beer, F., Ggel, A., Martin, K., et al., J. Mater. Chem., 1997, vol. 7, no. 8, pp. 1327–1330.
Potalitsyn, M.G., Alekhin, O.S., Khisamutdinov, R.S., et al., Modification of Kaprolon with Fulleroid Materials, Programma 3-i Mezhdunarodnoi nauchno-tekhnicheskoi konferentsii “Polimernye kompozity v tribotekhnike. Problemy sozdaniya i primeneniya. Opyt ekspluatatsii” (Program of 3rd Int. Scientific and Technical Conf. “Polymeric Composites in Tribotechnology. Problems of Development and Use. Working Experience”), St. Petersburg: Prometei, April 26–28, 2005.
RF Patent 2216553.
Klestov, M.I. and Sokov, E.V., Sudostroenie, 1998, no. 3, pp. 36–39.
Chou, T.W., Textile Structural Composites, Their Processing and Properties, Polymeric Composites—Expanding the Limits: 18th Riso Int. Symp. on Materials Science, Sept. 1–5, 1997, pp. 15–24.
Konkin, A.A., Uglerodnye i drugie zharostoikie voloknistye materially (Carbon-Type and Other Refractory Fibrous Materials), Moscow: Khimiya, 1974.
Uglerodnye volokna i uglekompozity (Carbon Fibers and Their Composites), Fitzer, E.M., Ed., Moscow: Mir, 1988.
Difendorf, R.I. and Takarsky, E., Polym. Eng. Sci., 1975, vol. 15, no. 3, pp. 150–159.
Bennet, S.C. and Johnson, D.I., Carbon, 1979, vol. 17, pp. 25–39.
Bezruk, A.I. and Khoreva, G.B., Mekh. Kompoz. Mater., 1982, no. 3, pp. 15–18.
Fridman, L.I., Perlin, V.A. and Tarasova, V.V., Uglevoloknistye sorbenty: Obzornaya informatsiya, Promyshlennost’ khimicheskikh volokon (Carbon-Fiber Sorbents: Review Inf., Chemical Fiber Indistry), Leningrad: NIITEKhIM, 1987.
Giltrow, I.P. and Lancaster, J.K., Nature, 1967, vol. 214, no. 5093, pp. 1106–1107.
Carbon Fibre Reinforced Plastics Tribo/Comp. TDF for Bearings, Flight Int., 1987, no. 7, pp. 16–20.
Bakhareva, V.E., Kuz’min, V.N., Nikolaev, G.I., and Kholupko, E.P., Sudostr. Prom-st., Materialoved.: Polim. Kompoz. Mater., 1991, issue 17, pp. 94–98.
Kryzhanovskii, V.K., Iznosostoikie reaktoplasty (Wear-Resistant Thermosetting Plastics), Leningrad: Khimiya, 1984.
Bakhareva, V.E, Nikolaev, G.I., and Panfilov, N.A., Vopr. Materialoved., 1999, no. 3(20), pp. 261–276.
Nikolaev, G.I. and Panfilov, N.A., Sudostroenie, 1999, no. 4, pp. 59–61.
US Patent 5662993.
German Patent 4430130.
Trukizoe, T. and Ohmae, N., Fibre Sci. Technol., 1983, vol. 18, no. 4, pp. 742–746.
Bakhareva, V.E., Utkina, V.F., and Abozin, I.Yu., Sudostr. Prom-St., Materialoved.: Polim. Kompoz. Mater., 1991, issue 17, pp. 12–19.
RF Patent 2153107.
Bakhareva, V.E., Abozin, I.Yu., and Rybin, V.V., Vopr. Materialoved., 2001, no. 2(26), pp. 9–21.
Jacobs, O., Jaskulka, R., Yang, F., and Wu, W., Wear, 2004, vol. 256, no. 1–2, pp. 9–15.
Nikolaev, G.I., Abozin, I.Yu., Bakhareva, V.E., et al., Vopr. Materialoved., 2001, no. 2(26), pp. 30–38.
Abozin, I.Yu., Bakhareva, V.E., Lobyntseva, I.V., et al., Vopr. Materialoved., 2001, no. 2(26), pp. 38–44.
Abozin, I.Yu., Bakhareva, V.E., Ginzburg, B.M., et al., Vopr. Materialoved., 2002, no. 3(31), pp. 49–58.
Abozin, I.Yu., Bakhareva, V.E., Blyshko, I.V. and Nikolaev, G.I., Vopr. Materialoved., 2001, no. 2(26), pp. 54–61.
Abozin, I.Yu., Anisimov, A.V., Bakhareva, V.E., et al., Vopr. Materialoved., 2003, no. 3(35), pp. 7–15.
Tochil’nikov, D.G. and Ginzburg, B.M., Vopr. Materialoved., 2002, no. 3(31), pp. 39–48.
Anisimov, A.V., Bakhareva, V.E., Panfilov, N.A., et al., Vopr. Materialoved., 2002, no. 3(31), pp. 73–77.
Anisimov A.V., Bakhareva V.E., Blyshko I.V., et al., Anisotropy and Effect of Modification of Carbon-Reinforced Plastics on Their Tribotechnical Properties, Programma 3-i Mezhdunarodnoi nauchno-tekhnicheskoi konferentsii “Polimernye kompozity v tribotekhnike. Problemy sozdaniya i primeneniya. Opyt ekspluatatsii” (Program of 3rd Int. Scientific and Technical Conf. “Polymeric Composites in Tribotechnology. Problems of Development and Use. Working Experience”), St. Petersburg: Prometei, April 26–28, 2005.
Ginzburg, B.M., Tochil’nikov, D.G., Bakhareva, V.E., and Rybin, V.V., Probl. Mashinostr. Nadezhn. Mashin, 2003, no. 4, pp. 46–52.
Author information
Authors and Affiliations
Additional information
Original Russian Text © B.M. Ginzburg, D.G. Tochil’nikov, V.E. Bakhareva, A.V. Anisimov, O.F. Kireenko, 2006, published in Zhurnal Prikladnoi Khimii, 2006, Vol. 79, No. 5, pp. 705–716.
Rights and permissions
About this article
Cite this article
Ginzburg, B.M., Tochil’nikov, D.G., Bakhareva, V.E. et al. Polymeric materials for water-lubricated plain bearings. Russ J Appl Chem 79, 695–706 (2006). https://doi.org/10.1134/S1070427206050016
Received:
Issue Date:
DOI: https://doi.org/10.1134/S1070427206050016