Abstract
In this study, metal-carbon nanocomposites have been synthesized via the method of simultaneous formation of bimetallic Fe–Co nanoparticles and carbon support based on pyrolyzed chitosan under the IR irradiation. The XRD structural characteristics as well as morphology and dispersity of Fe–Co nanoparticles depending on the loading of metals in the nanocomposites have been studied. It has been shown that the increase in the metal salts loading in the precursor leads to the formation of metal nanoparticles of larger size and more homogeneous composition of the Fe–Co solid solution. Detailed analysis of the XRD peaks of the obtained Fe–Co phase has allowed to distinguish them into several phases of a solid solution based on body-centered cubic and face-centered cubic lattices.
Similar content being viewed by others
REFERENCES
Feynman, R., J. Microelectromech. Sci., 1992, vol. 1, no. 1, p. 60. https://doi.org/10.1109/84.128057
Ilyin, S.O., Kulichikhin, V.G., and Malkin, A.Y., Colloid. Polym. Sci., 2015, vol. 293, p. 1647. https://doi.org/10.1007/s00396-015-3543-6
Evans, E.R., Bugga, P., Asthana, V., and Drezek, R., Mater. Today, 2018, vol. 21, p. 673. https://doi.org/10.1016/J.MATTOD.2017.11.022
Fatehi, M.H., Shayegan, J., Zabihi, M., and Goodarznia, I., J. Environ. Chem. Eng., 2017, vol. 5, p. 1754. https://doi.org/10.1016/J.JECE.2017.03.006
Zhang, Y. and Wang, Y., RSC Adv., 2017, vol. 7, p. 45129. https://doi.org/10.1039/C7RA07551K
Chung, W.-H., Hwang, H.-J., and Kim, H.-S., Thin Solid Films, 2015, vol. 580, p. 61. https://doi.org/10.1016/J.TSF.2015.03.004
Lee, C., Kim, S.K., Choi, J.-H., Chang, H., and Jang, H.D., Appl. Surf. Sci., 2018, vol. 448, p. 571. https://doi.org/10.1016/J.APSUSC.2018.04.147
Zhou, Z.-Y., Tian, N., Li, J.-T., Broadwell, I., and Sun, S.-G., Chem. Soc. Rev., 2011, vol. 40, p. 4167. https://doi.org/10.1039/C0CS00176G
Zhou, Y., Jin, C., Li, Y., and Shen, W., Nano Today, 2018, vol. 20, p. 101. https://doi.org/10.1016/J.NANTOD.2018.04.005
Kulikova M.V, Dement’eva, O.S., and Kuz’min, A.E., Petrol. Chem., 2018, vol. 58, p. 1237. https://doi.org/10.1134/S0965544118140086
Chistyakov, A.V., Tsodikov, M.V., Chudakova, M.V., Gubanov, M.A., Zharova, P.A., Bukina, Z.Y., Kolesnichenko, N.V., Gekhman, A.E., and Khadzhiev, S.N., Petrol. Chem., 2018, vol. 58, p. 258. https://doi.org/10.1134/S0965544118030040
Mahmoudi, H., Mahmoudi, M., Doustdar, O., Jahangiri, H., Tsolakis, A., Gu, S., and Wyszynski, L.M., Biofuels Eng., 2017, vol. 2, p. 11. https://doi.org/10.1515/bfuel-2017-0002
Cushing, B.L., Kolesnichenko, V.L., and O’Connor, C.J., Chem. Rev., 2004, vol. 104, p. 3893. https://doi.org/10.1021/cr030027b
Cid, A. and Simal-Gandara, J., J. Inorg. Organomet. Polym. Mater., 2020, vol. 30, p. 1011. https://doi.org/10.1007/s10904-019-01331-9
Lv, J., Ma, X., Bai, S., Huang, C., Li, Z., and Gong, J., Int. J. Hydrogen Energy, 2011, vol. 36, p. 8365. https://doi.org/10.1016/J.IJHYDENE.2011.04.122
Tsodikov, M.V., Ellert, O.G., Nikolaev, S.A., Arapova, O.V., Konstantinov, G.I., Bukhtenko, O.V., and Vasil’kov, A.Y., Chem. Eng. J., 2017, vol. 309, p. 628. https://doi.org/10.1016/J.CEJ.2016.10.031
Ellert, O.G., Tsodikov, M.V., Nikolaev, S.A., and Novotortsev, V.M., Russ. Chem. Rev., 2014, vol. 83, p. 718. https://doi.org/10.1070/RC2014v083n08ABEH004432
Dal Santo, V., Gallo, A., Naldoni, A., Guidotti, M., and Psaro, R., Catal. Today, 2012, vol. 197, p. 190. https://doi.org/10.1016/J.CATTOD.2012.07.037
Efimov, M.N., Vasilev, A.A., Muratov, D.G., Zemtsov, L.M., and Karpacheva, G.P., Russ. J. Phys. Chem. (A), 2017, vol. 91, p. 1766. https://doi.org/10.1134/s0036024417090096
Chudakova, M.V., Kulikova, M.V., Ivantsov, M.I., Bondarenko, G.N., Efimov, M.N., Vasil’ev, A.A., Zemtsov, L.M., Karpacheva, G.P., and Khadzhiev, S.N., Petrol. Chem., 2017, vol. 57, p. 694. https://doi.org/10.1134/S0965544117080023
Muratov, D.G., Vasilev, A.A., Efimov, M.N., Karpacheva, G.P., Dzidziguri, E.L., and Chernavskiy, P.A., Inorg. Mater. Appl. Res., 2019, vol. 10, p. 666. https://doi.org/10.1134/S2075113319030298
Thomas, C., Industrial Catalytic Processes and Efficient Catalysts, Weinheim: VCH, 1997.
Shelekhov, E.V. and Sviridova, T.A., Metal Science and Heat Treatment, 2000, vol. 42, p. 309. https://doi.org/10.1007/BF02471306
Taylor, A. and Sinclair, H., Proc. Phys. Soc., 1945, vol. 57, p. 126.
Barabash, O.M. and Koval’, Yu.N., Struktura i svoistva metallov i splavov: Spravochnik (The Structure and Properties of Metals and Alloys: A Handbook), Kiev: Naukova Dumka, 1986, p. 224.
Dzidziguri, E.L., Efimov, M.N., Zemtsov, L.M., Karpacheva, G.P., Muratov, D.G., and Sidorova, E.N., RU Patent 2597935, 2016. RF.
Selivanov, V.N. and Smyslov, E.F., Crystallogr. Rep., 1993, vol. 38, p. 382..
Funding
This work was carried out within the State Program of TIPS RAS.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
No conflict of interest was declared by the authors.
Rights and permissions
About this article
Cite this article
Bindiug, D.V., Vasilev, A.A., Dzidziguri, E.L. et al. Effect of the Loading of Metal Salts on the Formation of Fe–Co Solid Solution Nanoparticles in the IR-Pyrolyzed Chitosan Matrix. Russ J Gen Chem 91, 108–114 (2021). https://doi.org/10.1134/S1070363221010126
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1070363221010126