Abstract
The problem of inkjet printing quality was considered for the case of synthetic polymer-based film-like and fibrous-porous materials. Physical modeling of inkjet printing on polypropylene using water-based ink revealed remote interaction of liquid droplets with films and nonwoven webs, responsible for the droplet path deviation from the vertical fall and the droplet moving across the polymer film surface after the contact or holding at the fiber ends. Relationships were established and controlling techniques were proposed for the processes of absorption and spreading of liquid droplets in the materials to be printed with the view of increasing the accuracy of printing information symbols and reducing ink consumption.
Similar content being viewed by others
References
Zotova O., Vremya elektroniki (The Time of Electronics). http://www.russianelectronics.ru/leader-r/review/2376/doc/53715/(accessed 11.03.2016).
Ek, M., Gellerstedt, G., and Henriksson, G., Pulp and Paper Chemistry and Technology, vol. 4: Paper Products Physics and Technology, Berlin: Walter de Gruyter 2009, p. 342.
Bezrukov, V.I., Osnovy elektrokaplestruinykh tekhnologii (Fundamentals of Electric Droplet Technology), St. Petersburg: Sudostroenie, 2001.
Ponomareva, M.A. and Yakutenok, V.A., Vestn. Tomsk. Gos. Univ., Ser. Mat. Mekh. 2007, no. 1, p. 79.
Lavi, B. and Marmur, A., Colloids Surf., A: Physicochem. Eng. Asp. 2004, vol. 250, p. 409.
Nakaya, C., J. Phys. Soc. Jpn., 1974, vol. 37, no. 2, p. 539.
Bablyuk, E.B., Letyago, A.G., Anokhina, E.A., and Maksimov, S.V., Izv. Vyssh. Uchebn. Zaved., Probl. Poligr. Izd. Dela, 2012, no. 3, p. 3.
Solodovchenko, I.M., Elektrokhimiya 1966, vol. 2, no. 4, p. 472.
Hansma, P.K., Physics Rep. 1977, p. 145.
Kondratov, A.P., Gromov, A.N., and Manin, V.N., Kapsulirovanie v polimernykh plenkakh (Encapsulation in Polymer Films), Moscow: Khimiya 1990.
Kronberg, B., Holmberg, K., and Lindman, B., Surface Chemistry of Surfactants and Polymers, Chichester: Wiley 2014, p. 479.
Volkov A.I. and Zharskii, I.M., Bol’shoi khimicheskii spravochnik (Big Chemical Handbook), Minsk: Sovremennaya Shkola, 2005.
Bokova, E.S., Voloknisto-poristye kompozitsionnye materialy s ispol’zovaniem bikomponentnykh volokon (Fibrous-Porous Composite Materials Based on Bicomponent Fibers), Moscow: Mosk. Gos. Univ. Diz. Tekhnol., 2011.
Stuart, B.H., Polymer Analysis, Chichester: Wiley 2003, p. 280.
Dedov, A.V. and Nazarov, V.G., Fibre Chem. 2011, vol. 43, no. 3, p. 259. doi https://doi.org/10.1007/s10692-011-9344-x
Savel’ev, M.A. and Kondratov, A.P., Izv. Vyssh. Uchebn. Zaved., Probl. Poligr. Izd. Dela 2015, no. 2, p. 37.
Savel’ev, M.A., Ermakova, I.N., Zhuravleva, G.N., and Kondratov, A.P., RF Patent Application no. 2015135611.
Ostrovskii, Yu.K., Polukhina, L.M., and Evsyukova, N.V., Sbornik materialov XVIII Mezhdunarodnogo nauchno-prakt. foruma “Smartex” (Coll. Mater. of the XVIII Int. Sci. and Practical Forum “Smartex”) 2015, p. 201.
Zueva, A.M., Savel’ev, M.A., Kondratov, A.P., and Bablyuk, E.B., Izv. Vyssh. Uchebn. Zaved., Probl. Poligr. Izd. Dela, 2015, no. 6, p. 36.
Kasahara, T., Shoji, S., and Mizuno, J., Trans. Jpn. Inst. Electron. Packag., 2012, no. 1, p. 47.
Lin, F., Yanan, Z., Jinming, X., Ying, Z., Nu, W., Fan, X., and Lei, J., Langmuir 2008, vol. 24, p. 4114. doi https://doi.org/10.1021/la703821h
Author information
Authors and Affiliations
Corresponding authors
Additional information
Original Russian Text © A.P. Kondratov, M.A. Savel’ev, 2016, published in Rossiiskii Khimicheskii Zhurnal, 2016, Vol. 60, No. 3, pp. 105–112.
Rights and permissions
About this article
Cite this article
Kondratov, A.P., Savel’ev, M.A. Dynamics of the Remote and Contact Interaction of Liquid Droplets with Film-Like and Fibrous-Porous Polymeric Materials. Russ J Gen Chem 88, 2740–2746 (2018). https://doi.org/10.1134/S1070363218120447
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1070363218120447