Abstract
The morphology of the friction surface of antifrictional charged carbon plastics is investigated by atomic force and scanning electron microscopy. Methodical approaches to composites probe preparing are described, and possibilities of methods for examination of friction surface are shown. On the basis of the obtained results, the role of nanosized modifiers of various chemical natures (used in manufacturing antifrictional materials) is highlighted, and the mechanisms of the processes that occur in carbon plastics on the tribological contact are suggested.
Similar content being viewed by others
References
Anisimov, A.V., Bakhareva, V.E., Nikolaev, G.I., and Rybin, V.V., Vopr. Materialoved., 2008, no. 2 (54), pp. 132–147.
Tarnopol’skii, Yu.M., Ghigun, I.G., and Polyakov, V.A., Prostranstvenno-armirovannye kompozitssionnye materialy (Spatially Reinforced Composite Materials), Moscow: Mashinostroenie, 1987.
Shindo, D. and Oikawa, T., Analytical Electron Microscopy for Materials Science, Tokyo: Springer, 2002.
Brandon, D. and Caplan, W.D., Microstructural Characterization of Materials, London: Wiley, 2002, 2nd ed.
Tools and Techniques in Physical Metallurgy, Weinberg, F., Ed., New York: Dekker, 1970. Translater under the title Pribory i metody fizicheskogo metallovedeniya, Moscow: Mir, 1973, vol. 1; 1974, vol. 2.
Skaskevich, A.A., Gocko, A.S., and Mikhailova, L.V., Trenie Iznos, 2002, vol. 23, no. 5, pp. 551–555.
Ma, Y.-Z., Huang, B.-Y., Xiong, X., et al., J. Cent. South Univ. Technol., 2003, vol. 10, no. 3, pp. 173–176.
Blau, P.J., J. Mater. Eng. & Perform., 2003, vol. 12, no. 1, pp. 56–60.
Okhlopkova, A.A., Petrova, P.N., Krasnov, A.P., et al., Trenie Iznos, 2003, vol. 24, no. 3, pp. 295–300.
Kim, S.J., Cho, M.H., Basch, R.H., et al., Tribology Lett., 2004, vol. 17, no. 3, pp. 655–661.
Xian, J. and Xiaomei, L., J. Mater. Eng. & Perform., 2004, vol. 13, no. 5, pp. 642–646.
Chen, Z., Li, T., Yang, Y., et al., Wear, 2004, vol. 257, nos. 7–8, pp. 696–707.
Unal, H., Sen, U., and Mimaroglu, A., Tribology Int., 2004, vol. 37, no. 9, pp. 727–732.
Okhlopkova, A.A., Gogoleva, O.V., and Shvets, E.Yu., Trenie Iznos, 2004, vol. 25, no. 2, pp. 202–206.
Ji, Q.L., Zhang, M.Q., Rong, M.Z., et al., Tribology Lett., 2005, vol. 20, no. 2, pp. 115–123.
Zhang, Z. and Friedrich, K., Polymer Composites: from Nano-to-Macro-Scale, Friedrich, K., Fakirov, S., and Zhang, Z., New York: Springer, 2005, pp. 169–185.
Czighny, T., Ibid., pp. 309–328.
Rogachev, A.V., Yarmolenko, M.A., Sarkisov, O.A., and Rogachev, A.A., Trenie Iznos, 2005, vol. 26, no. 1, pp. 43–47.
Cheng, X.-H. and Shangguan, Q.-Q., Tribology Lett., 2006, vol. 23, no. 2, pp. 93–99.
Wichmann, M.H.G., Sumfleth, J., Fiedler, B., et al., Mech. Compos. Mater., 2006, vol. 42, no. 5, pp. 395–406.
Chang, L., Zhang, Z., Ye, L., and Friedrich, K., Tribology Int., 2007, vol. 40, no. 7, pp. 1170–1178.
Jia, B.-B., Li, T.-Sh., Liu, X.-J., and Cong, P.-H., Wear, 2007, vol. 262, no. 11–12, pp. 1353–1359.
Rogachev, A.A., Yarmolenko, M.A., Rogachev, A.V., et al., Mater. Sci. (Medziagotyra), 2008, vol. 14, no. 1, pp. 40–44.
Mironov, V.L., Osnovy skaniruyuschei zondovoi mikroskopii (Principles of Scanning Probe Microscopy), Moscow: Tekhnosfera, 2004.
Overney, R.M., TRIP, 1995, vol. 3, no. 11, pp. 359–364.
Carpick, R.W. and Salmeron, M., Chem. Rev., 1997, vol. 97, no. 4, pp. 1163–1194.
Klein, H., Pailharey, D., and Mathey, Y., Surf. Sci., 1997, vol. 387, nos. 1–3, pp. 227–235.
Lee, W.-K., Polymer, 1999, vol. 40, no. 20, pp. 5631–5636.
Riedo, E., Chevrier, J., Comin, F., and Brune, H., Surf. Sci., 2001, vol. 477, no. 1, pp. 25–34.
Feresenbet, E., Raghavan, D., and Holmes, G.A., J. Adhes., 2003, vol. 79, no. 7, pp. 643–665.
Bhushan, B., Springer Handbook of Nanotechnology, New York: Springer, 2004, pp. 497–541.
Macanas, J., Palacio, L., Pradanos, P., et al., Appl. Phys. A., 2006, vol. 84, no. 3, pp. 277–284.
Satyanarayana, N., Sinha, S.K., and Shen, L., Tribology Lett., 2007, vol. 28, no. 1, pp. 71–80.
Bykov, V.A., Nano-Mikrosist. Tekh., 2000, no. 1, pp. 21–33.
Sawyer, L.C., Grubb, D.T., and Meyers, G.F., Polymer Microscopy, New York: Springer, 2008.
Nikolaev, G.I., Bakhareva, V.E., Vlasov, V.A., et al., Vopr. Materialoved., 2006, no. 2 (46), pp. 7–21.
Patent RF 2153107, MPK7 F 16 C 33/04, D 69/02, publ. 20.07.2000.
Anisimov, A.V., Barakhtin, B.K., Bakhareva, V.E., and Rybin, V.V., Vopr. Materialoved., 2006, no. 2 (46), pp. 36–43.
Sosnov, E.A., Anisimov, A.V., Blyshko, I.V., et al., Trenie Iznos, 2008, vol. 29, no. 6, pp. 640–646.
Anisimov, A.V., Barakhtin, B.K., Bakhareva, V.E., et al., Vopr. Materialoved., 2006, no. 2 (46), pp. 27–35.
Bakhareva, V.E., Blyshko, I.V., Nikolaev, G.I., et al., Ibid., 2006, no. 2 (46), pp. 70–78.
Patent RF 2295546, MPK7 C 08 J 05/16, L 61/10, K 07/06, K 03/08, K 05/09, F 16 C 33/04, publ. 20.03.2007.
Patent RF no. 2259382. MPK7 C 09 K 03/14, C 08 J 05/16, publ. 27.08.2005.
Endo, T., Iijima, T., Kaneko, Y., et al., Wear, 1995, vol. 190, no. 2, pp. 219–225.
Bellido-González, V., Jones, A.H.S., Hampshire, J., et al., Surf. Coat. Technol., 1997, vol. 97, no. 1–3, pp. 687–693.
Simmonds, M.C., Savan, A., Pflüger, E., and van Swygenhoven, H., Ibid., 2000, vol. 126, no. 1, pp. 15–24.
Nainaparampil, J.J., Phani, A.R., Krzanowski, J.E., and Zabinski, J.S., Ibid., 2004, vol. 187, no. 2–3, pp. 326–335.
Muratore, C. and Voevodin, A.A., Ibid., 2006, vol. 201, no. 7, pp. 4125–4130.
Rabinovich, V.A and Khavin, Z.Ya., Kratkii khimicheskii spravochnik (Concise Chemical Handbook), Leningrad: Khimiya, 1978.
State Standard 1320-74 (ISO 4383-91), Tin and Lead Babbits, Technical Specifications.
Kuznetsov, A.A., Semenova, G.K., Bakhareva, V.E., et al., Vopr. Materialoved., 2009, no. 1 (57), pp. 52–56.
Bakhareva, V.E., Anisimov, A.V., Savelov, A.S., et al, Ibid., 2009, vol. 57, no. 1, pp. 17–25.
Abozin, I.Yu., Bakhareva, V.E., Ginzburg, B.M., and Tochil’nikov, D.G., Ibid., 2002, no. 3 (31), pp. 68–72.
Dobychin, M.N., Kurbatkin, I.I., Morozov, A.V., et al.,. Ibid., 2009, no. 1 (57), pp. 26–32.
Shelestova, V.A. and Grakovich, P.N., Trenie Iznos, 1998, vol. 19, no. 1, pp. 116–121.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © E.A. Sosnov, V.E. Bakhareva, A.V. Anisimov, 2010, published in Rossiiskii Khimicheskii Zhurnal, 2010, Vol. 53, No. 4, pp. 107–114.
Rights and permissions
About this article
Cite this article
Sosnov, E.A., Bakhareva, V.E. & Anisimov, A.V. Surface morphology of antifrictional polymer materials: Experience in atomic force and electron microscopy. Russ J Gen Chem 80, 2192–2200 (2010). https://doi.org/10.1134/S1070363210100488
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1070363210100488