Abstract
An automated procedure for analyzing the control word based on the modified adjacency matrix and constraint patterns is proposed. It is designed to determine all possible states of the control word and transitions between them for an arbitrary key element switching method and to find whether there are prohibited states and transitions that lead to leakage currents. The method is described and implemented in Mathematica.
Similar content being viewed by others
References
B. N. Popov, Methods for Designing Microprocessor Devices for Control of Mechatronic Modules of Drive Systems: Doctoral Dissertation in Technical Sciences (Moscow, 2001) [in Russian].
A. V. Krivilev, “Application of Bulk Graphs for Investigation of Operation of a Three-Phase Contactless Direct Current Motor”, in Proceeding of 10th International Workshop of Modern Technologies in Problems of Control, Automation, and Data Processing (Mosk. Avi-ats. Inst., Moscow, 2001), p. 125 [in Russian].
B. I. Petrov, V. A. Polkovnikov, B. N. Popov, et al., Electric Drives of Aircraft: Textbook for Aviation Institutes, Ed. by V. A. Polkovnikov (Mashinostroenie, Moscow, 1990) [in Russian].
M. Trott, The Mathematical Guidebook for Programming (Springer, New York, 1028).
Author information
Authors and Affiliations
Additional information
Original Russian Text © A.V. Krivilev, A.V. Sitnikova, 2010, published in Izvestiya Akademii Nauk. Teoriya i Sistemy Upravleniya, 2010, No. 3, pp. 5–13.
Rights and permissions
About this article
Cite this article
Krivilev, A.V., Sitnikova, A.V. Computer-aided analysis of the control word of mechatronic module of the three-phase thyratron motor drive. J. Comput. Syst. Sci. Int. 49, 345–352 (2010). https://doi.org/10.1134/S1064230710030020
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1064230710030020