Abstract
A model of radiation generation process in active tapered double-clad optical fibers based on rate equations in the adiabatic approximation is developed. The generation process in active tapered fibers with different geometric profiles and mirrors at both ends alloyed with ytterbium is numerically simulated. The advantages of tapered fibers over cylindrical fibers are demonstrated; these advantages include low power density, high output power, higher power slope efficiency, and smaller length required for achieving similar output power.
Similar content being viewed by others
References
V. Filippov, Y. Chamorovskii, J. Kerttula, et al., Opt. Express 16, 1929 (2008).
V. Filippov, Y. Chamorovskii, J. Kerttula, et al., Opt. Lett. 33, 1416 (2008).
V. Filippov, Y. Chamorovskii, J. Kerttula, et al., in Proc. 3rd EPS-QEOD Europhoton Conf. 31 Aug.–5 Sep. 2008 (Europhys Conference Abstract, Paris, 2008), Vol. 32G, p. 33.
V. Filippov, Y. Chamorovskii, J. Kerttula, et al., Opt. Express 17, 1203 (2009).
V. Filippov, J. Kerttula, Y. Chamorovskii, et al., Opt. Express 18, 12499 (2010).
M. A. Mel’kumov, Candidate’s Dissertation in Mathematical Physics (IOF RAN, Moscow, 2006).
K. Ido and A. Hardy Amos, IEEE. J. Quantum Electron 34, 1570 (1998).
Wang Yong, Xu Chang-Qing, Po Hong, Opt. Commun. 242, 487 (2004).
O. Svelto, Principles of Lasers (Plenum, New York, 1976; Mir, Moscow, 1990).
M. A. Mel’kumov, I. A. Bufetov, K. S. Kravtsov, et al., Preprint No. 5, Opt. IOF RAN (Nauch. Tsentr Volokon. Opt. IOF RAN im. A. M. Prokhorova, Moscow, 2004) [in Russian].
V. A. Bagan, S. A. Nikitov, Yu. K. Chamorovskii, A. D. Shatrov, J. Commun. Technol. Electron. 55, 1154 (2010).
Additional information
Original Russian Text © V.E. Ustimchik, S.A. Nikitov, Yu.K. Chamorovskii, 2011, published in Radiotekhnika i Elektronika, 2011, Vol. 56, No. 10, pp. 1261–1267.
Rights and permissions
About this article
Cite this article
Ustimchik, V.E., Nikitov, S.A. & Chamorovskii, Y.K. Simulation of radiation generation in an active double-clad optical tapered fiber. J. Commun. Technol. Electron. 56, 1249–1255 (2011). https://doi.org/10.1134/S1064226911100202
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1064226911100202