Abstract
Young’s modulus for heterophase composite silicon carbide ceramics with different phase ratios has been determined by two independent techniques. The applicability of the Voigt–Reuss–Hill model has been tested to the calculation of the effective Young’s modulus by the measured properties of ceramic components. It is established that the calculated data and results of independent measurements by dynamic indentation are close. It is shown that the advantage of the calculation method is a narrower range of the obtained values of Young’s modulus. At the same time, its application requires additional measurements of ceramic composition and mechanical properties of the components.
Similar content being viewed by others
REFERENCES
I. A. Birger and R. R. Mavlyutov, Strength of Materials (Nauka, Moscow, 1986) [in Russian].
GOST (State Standard) No. 1497–84 (ISO 6892-84), Metals. Tensile test methods (2005).
GOST (State Standard) No. 24409–80, Ceramic electrical materials. Test methods (2005).
J. E. Zorzi and C. A. Perottoni, Mater. Sci. Eng. A 574, 25 (2013). https://doi.org/10.1016/j.msea.2013.03.008
C. Reynaud, F. Thevenot, T. Chartier, and J.-L. Besson, J. Eur. Ceram. Soc. 25, 589 (2005). https://doi.org/10.1016/j.jeurceramsoc.2004.02.009
A. A. Karabutov, T. B. Podymova, and E. B. Cherepetskaya, J. Appl. Mech. Tech. Phys. 54, 500 (2013).
K. T. Tazhibaev and M. Zh. Ormonov, Probl. Sovrem. Nauki Obrazov. 9 (91), 52 (2017).
B. E. Pobedrya, Mechanics of Composite Materials (Mosk. Gos. Univ., Moscow, 1984) [in Russian].
G. Grimvall, Thermophysical Properties of Materials (Elsevier Science B.V., Amsterdam, 1999).
L. L. Snead, T. Nozawa, Y. Katoh, T. S. Byun, S. Kondo, and D. Petti, J. Nucl. Mater. 371, 329 (2007). https://doi.org/10.1016/j.jnucmat.2007.05.016
P. S. Grinchuk, M. V. Kiyashko, H. M. Abuhimd, M. S. Alshahrani, M. O. Stepkin, V. V. Toropov, A. A. Khort, D. V. Solovei, A. V. Akulich, M. D. Shashkov, and M. Yu. Liakh, J. Eur. Ceram. Soc. 38, 4815 (2018). https://doi.org/10.1016/j.jeurceramsoc.2018.07.014
P. S. Grinchuk, Kh. Abukhimd, A. V. Akulich, M. V. Kiyashko, D. V. Solovei, M. O. Stepkin, V. V. Toropov, M. D. Shashkov, A. A. Khort, and M. Yu. Lyakh, Dokl. NAN Belarusi 63, 223 (2019). https://doi.org/10.29235/1561-8323-2019-63-2-223-234
A. P. Kren and T. A. Protasenya, Russ. J. Nondestr. Test. 50, 419 (2014). https://doi.org/10.1134/S1061830914070079
M. A. Hopcroft, W. D. Nix, and T. W. Kenny, J. Microelectromech. Syst. 19, 229 (2010). https://doi.org/10.1109/JMEMS.2009.2039697
Funding
This work was supported by King Abdulaziz City for Science and Technology (Saudi Arabia).
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors declare that they have no conflict of interest.
Additional information
Translated by N. Saetova
Rights and permissions
About this article
Cite this article
Kiyashko, M.V., Grinchuk, P.S., Kuznetsova, T.A. et al. Determination of Elastic Modulus of SiC-Based Composite Ceramics. Tech. Phys. Lett. 47, 150–153 (2021). https://doi.org/10.1134/S1063785021020073
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1063785021020073