Abstract
The nature of changes in laser photoacoustic signals near small-diameter holes in aluminum and steel layers in a bimetallic plate obtained by hot rolling is investigated. The experimental results are compared with the solution of the classical Kirsch problem for stress distribution around a circular hole in a prestressed material. The possibility of estimating internal stresses by the laser photoacoustic method in combination with the method of drilling holes in industrial bimetallic plates is shown.
Similar content being viewed by others
REFERENCES
H. Huan, L. Lin, A. Mandelis, C. Peng, X. Chen, and J. Zhan, Appl. Sci. 10, 1588 (2020). https://doi.org/10.3390/app10051588
H. Huan, A. Mandelis, B. Lashkari, and L. Liu, Int. J. Thermophys. 38, 62 (2017). https://doi.org/10.1007/s10765-017-2197-7
K. L. Muratikov, A. L. Glazov, D. N. Rose, and J. E. Dumar, J. Appl. Phys. 88, 2948 (2000). https://doi.org/10.1063/1.1287526
K. L. Muratikov and A. L. Glazov, Tech. Phys. 48, 1028 (2003).
A. L. Glazov, N. F. Morozov, and K. L. Muratikov, Phys. Solid State 58, 1735 (2016).
A. L. Glazov and K. L. Muratikov, Tech. Phys. Lett. 45, 902 (2019). https://doi.org/10.1134/S1063785019090049
A. L. Glazov, N. F. Morozov, and K. L. Muratikov, Dokl. Phys. 64, 20 (2019). https://doi.org/10.1134/S1028335819010075
C. Millon, A. Vanhoye, A. F. Obaton, and J. D. Penot, Weld. World 62, 653 (2018). https://doi.org/10.1007/s40194-018-0567-9
J. Yu, D. Zhang, H. Li, C. Song, X. Zhou, S. Shen, G. Zhang, Y. Yang, and H. Wang, Appl. Sci. 10, 365 (2020). https://doi.org/10.3390/app10010365
J. An, Y. Liu, Y. Lu, and D. Sun, Mater. Charact. 47, 291 (2001). https://doi.org/10.1016/S1044-5803(01)00190-5
F. X. Yin, L. Li, Y. Tanaka, S. Kishimoto, and K. Nagai, Mater. Sci. Technol. 28, 783 (2012). https://doi.org/10.1179/1743284711Y.0000000116
B. X. Liu, Q. An, F. X. Yin, S. Wang, and C. X. Chen, J. Mater. Sci. 54, 11357 (2019). https://doi.org/10.1007/s10853-019-03581-x
A. S. Oryshchenko, E. P. Osokin, V. I. Pavlova, and S. A. Zykov, Avtom. Svarka, No. 10, 43 (2009). https://patonpublishinghouse.com/as/pdf/2009/as200910all.pdf.
A. Karolczuk, M. Kowalski, K. Kluger, and F. Zók, Arch. Metall. Mater. 59, 1129 (2014). https://doi.org/10.2478/amm-2014-0195
A. Karolczuk, H. Paul, Z. Szulc, K. Kluger, M. Najwer, and G. Kwiatkowski, J. Mater. Eng. Perform. 27, 4571 (2018). https://doi.org/10.1007/s11665-018-3559-4
A. L. Glazov, N. F. Morozov, and K. L. Muratikov, Fiz. Mezomekh. 22 (2), 49 (2019). https://doi.org/10.24411/1683-805X-2019-12004
S. P. Timoshenko and J. Goodier, Theory of Elasticity (McGraw-Hill, New York, 1951).
J. T. Bonarski, B. Kania, K. Bolanowski, and A. Karolczuk, Arch. Metall. Mater. 60, 2247 (2015). https://doi.org/10.1515/amm-2015-0370
M. Sedighi and M. Honarpisheh, Mater. Des. 37, 577 (2012). https://doi.org/10.1016/j.matdes.2011.10.022
W. Yasheng, C. Hongneng, and M. Ninxu, Strain 35, 7 (1999). https://doi.org/10.1111/j.1475-1305.1999.tb01112
ACKNOWLEDGMENTS
The authors are grateful to the National Research Center “Kurchatov Institute” and Prometei Central Research Institute of Structural Materials for providing samples of bimetallic plates, as well as to V.I. Pavlova for taking part in the discussion of results.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors declare that they have no conflict of interest.
Additional information
Translated by O. Kadkin
Rights and permissions
About this article
Cite this article
Glazov, A.L., Muratikov, K.L. Diagnostics of Residual Stresses in Bimetallic Aluminum–Steel Plates by Means of Laser Ultrasound and a Test Hole. Tech. Phys. Lett. 46, 1188–1191 (2020). https://doi.org/10.1134/S106378502012007X
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S106378502012007X