Abstract
To identify threshold structuring regimes, two series of tests of 1565 aluminum alloy were conducted in the speed range of 250–750 m/s: impact tests under uniaxial deformation and penetration of impactors. Comparison of the results of both series of tests enables the separation of the drag in the interaction of an elongated impactor with a target from the friction resistance with its side part. The structuring scale changes twice on the lateral surface of the cavity—at speeds of 400 and 623.3 m/s—and the second structuring threshold almost coincides with the same threshold under loading under uniaxial deformation.
Similar content being viewed by others
REFERENCES
A. F. Belikova, S. N. Buravova, and E. V. Petrov, Tech. Phys. 58, 1152 (2013).
I. N. Borodin and A. E. Mayer, Tech. Phys. 58, 1159 (2013).
A. S. Vlasov and A. B. Sinani, Tech. Phys. 62, 1049 (2017).
M. A. Sokovikov, D. A. Bilalov, V. V. Chudinov, S. V. Uvarov, O. A. Plekhov, A. I. Terekhina, and O. B. Naimark, Tech. Phys. Lett. 40, 1075 (2014).
V. V. Rybin, V. N. Pereverzentsev, and Yu. V. Svirina, Tech. Phys. 62, 745 (2017).
N. A. Zlatin, M. S. Mochalov, G. S. Pugachev, and A. M. Bragov, Sov. Tech. Phys. 18, 1235 (1973).
Yu. I. Meshcheryakov, Multiscale Shock Wave Processes in Solids (Nestor-Istoriya, St. Petersburg, 2018) [in Russian].
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by O. Zhukova
Rights and permissions
About this article
Cite this article
Divakov, A.K., Zhigacheva, N.I., Konovalov, G.V. et al. Threshold Modes of Dynamic Deformation of 1565 Aluminum Alloy. Tech. Phys. Lett. 45, 218–220 (2019). https://doi.org/10.1134/S1063785019030052
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1063785019030052