Abstract
Self-ordered nanoporous/nanotubular oxide films are prepared on the surface of porous powder materials of a titanium sponge by electrochemical anodization. By using scanning electron and atomic force microscopies, we establish that anodization of sintered powder of a titanium sponge in an electrolyte containing H2SO4 (10%) and HF (0.15%) yields an X-ray amorphous TiO2 film with a thickness of 250–350 nm and a regular pattern of nanopores and nanotubes with diameters of 30 to 70 nm. Our results confirm that the described method for surface modification of sintered powders of a titanium sponge holds promise in manufacturing bioactive implants.
Similar content being viewed by others
REFERENCES
V. V. Savich, D. I. Saroka, M. G. Kiselev, and M. V. Makarenko, Surface Modification of Titanium Implants and Its Influence on Their Biomechanical Parameters in Biological Media (Belaruskaya Navuka, Minsk, 2012).
K. Alvarez and H. Nakajima, Materials 2, 790 (2009). doi 10.3390/ma2030790
Z. J. Wally, W. van Grunsven, F. Claeyssens, R. Goodall, and G. C. Reilly, Metals 5, 1902 (2015). doi 10.3390/met5041902
A. I. Shelukhina, Polim. Mater. Tekhnol. 1 (2), 62 (2015).
V. V. Savich, A. I. Bobrovskaya, A. M. Taraikovich, and S. A. Bedenko, in Proc. Int. Scientific–Practical Conf. “Nanotechnology of Functional Materials,” St. Petersburg, Russia, 2012 (Politekh. Univ., St. Petersburg, 2012), p. 523.
Ch. R. V. S. Nagesh, C. S. Ramachandran, and R. B. Subramanyam, Trans. Indian Inst. Met. 61, 341 (2008).
K. Lee, A. Mazare, and P. Schmuki, Chem. Rev. 114, 9385 (2014).
B. Yang, M. Uchida, H.-M. Kim, X. Zhang, and T. Kokubo, Biomaterials 25, 1003 (2004).
I. M. Hamouda, N. A. El-wassefy, H. A. Marzook, A. N. Habib, A. El-deen, and G. Y. El-awady, Eur. J. Biotechnol. Biosci. 1 (3), 17 (2014).
X. Fan, B. Feng, J. Weng, J. Wang, and X. Lu, Mater. Lett. 65, 2899 (2011).
J. M. Macak, H. Tsuchiya, A. Ghicov, K. Yasuda, R. Hahn, S. Bauer, and P. Schmuki, Curr. Opin. Solid State Mater. Sci. 11, 3 (2007).
D. Regonini, C. R. Bowen, A. Jaroenworaluck, and R. Stevens, Mater. Sci. Eng., R 74, 377 (2013).
M. Kulkarni, A. Mazare, E. Gongadze, Š. Perutkova, V. Kralj-Iglic, I. Milošev, P. Schmuki, A. Iglic, and M. Mozetic, Nanotechnology 26, 062002 (2015).
X. Zhou, N. T. Nguyen, S. Özkan, and P. Schmuki, Electrochem. Commun. 46, 157 (2014).
E. Beltran-Partida, B. Valdez-Salas, A. Moreno-Ulloa, A. Escamilla, M. A. Curiel, et al., J. Nanobiotechnol. 15, 10 (2017). doi 10.1186/s12951-017-0247-8
Q. Wang, M. Cheng, G. He, and X. Zhang, J. Nanomater. 2015, 408634 (2015). http://dx.doi.org/ 10.1155/2015/408634
J.-H. Lee, H.-E. Kim, and Y.-H. Koh, Mater. Lett. 63, 1995 (2009).
E. B. Makarova, Yu. M. Zakharov, A. P. Rubshtein, and A. I. Isaikin, Genii Ortop., No. 4, 111 (2011).
A. I. Shelukhina, K. V. Stepanova, A. N. Kokatev, and V. E. Tolstik, Poroshk. Metall., No. 38, 180 (2015).
A. N. Kokatev, K. V. Stepanova, N. M. Yakovleva, A. I. Shelukhina, and V. E. Tolstik, Tr. Kol’sk. Nauchn. Tsentra Ross. Akad. Nauk. Khim. Materialoved., No. 5 (31), 375 (2015).
A. N. Kokatev, K. V. Stepanova, N. M. Yakovleva, A. M. Shul’ga, A. I. Shelukhina, and V. E. Tolstik, in Proc. 10th Int. Symp. “Powder Metallurgy: Surface Engineering, Novel Powder Composite Materials. Welding,” Minsk, Belarus, 2017 (Belaruskaya Navuka, Minsk, 2017), Vol. 2, p. 307.
D. Gong, C. A. Grimes, O. K. Varghese, W. Hu, R. S. Singh, Z. Chen, and E. C. Dickey, J. Mater. Res. 16, 3331 (2001).
K. V. Stepanova, N. M. Yakovleva, A. N. Kokatev, and Kh. Pettersson, Uch. Zap. Petrozavodsk. Gos. Univ. 147 (2), 81 (2015).
N. M. Yakovleva, A. N. Yakovlev, M. M. Gafiyatullin, and A. I. Denisov, Zavod. Lab., Diagn. Mater. 75 (2), 21 (2009).
K. Nielsh, J. Choi, K. Schwirn, R. Wehrspohn, and U. Gösele, Nano Lett. 2, 676 (2002).
A. C. Alves, F. Wenger, P. Ponthiaux, J.-P. Celis, A. M. Pinto, L. A. Rocha, and J. C. S. Fernandes, Electrochim. Acta 234, 16 (2017).
ACKNOWLEDGMENTS
The work was supported by the Russian Foundation for Basic Research, project no. 15-58-04086 Bel_mol_a and the Belarusian Republican Foundation for Fundamental Research, agreement T15RM-062.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by A. Kukharuk
Rights and permissions
About this article
Cite this article
Kokatev, A.N., Stepanova, K.V., Yakovleva, N.M. et al. Self-Organization of a Bioactive Nanostructured Oxide Layer at the Surface of Sintered Titanium Sponge Powder Subjected to Electrochemical Anodization. Tech. Phys. 63, 1334–1340 (2018). https://doi.org/10.1134/S1063784218090062
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1063784218090062