Abstract
The parameters of plastic deformation macrolocalization are compared to the parameters of the Hall-Petch relation for the flow stress in polycrystalline aluminum samples with a grain size of 0.008–5.000 mm. Two types of the dependence of the localized plastic deformation autowave length on the grain size and two versions of hardening according to the Hall-Petch relation are found in the grain size range under study. The boundary between these versions is shown to correspond to d ≈ 0.1 mm for both cases. A relation between localized plastic flow patterns and the Hall-Petch relation is revealed.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
L. B. Zuev, V. I. Danilov, and S. A. Barannikova, Physics of Plastic Flow Macrolocalization (Nauka, Novosibirsk, 2008) [in Russian].
R. J. McDonald, C. Efstathiou, and P. Curath, J. Eng. Mater. Technol. 131, 692 (2009).
A. Asharia, A. Beaudoin, and R. Miller, Math. Mech. Solids 13, 292 (2008).
C. Fressengeas, A. Beaudoin, and D. Entemeyer, Phys. Rev. B 79, 014108 (2009).
L. B. Zuev, B. S. Semukhin, and N. V. Zarikovskaya, Int. J. Solids Struct. 40, 941 (2003).
L. B. Zuev, T. M. Poletika, and G. N. Narimanova, Pis’ma Zh. Tekh. Fiz. 29(12), 74 (2003) [Tech. Phys. Lett. 29, 519 (2003)].
V. S. Ivanova, L. K. Gordienko, V. N. Geminov, et al., Role of Dislocations in Strengthening and Destruction of Metals (Nauka, Moscow, 1965) [in Russian].
N. V. Zarikovskaya and L. B. Zuev, Pis’ma Zh. Tekh. Fiz. 36(5), 11 (2010) [Tech. Phys. Lett. 36, 199 (2010)].
E. Schmidt and W. Boas, Plasticity of Crystals (Chapman and Hall, London, 1935; GONTI NKTP, Moscow, 1938).
B. Jaoul, J. Mech. Phys. Solids 5, 95 (1957).
R. M. Hill, Mathematical Theory of Plasticity (Clarendon, Oxford, 1950; GITTL, Moscow, 1956).
V. I. Trefilov, V. F. Moiseev, E. P. Pechkovskii, et al., Deformation Strengthening and Destruction of Polycrystalline Metals (Naukova Dumka, Kiev, 1987) [in Russian].
L. B. Zuev, Ann. Phys. 16, 286 (2007).
G. Murdie, in Mathematical Modeling, Ed. by J. Andrews and R. McLone (Butterworths, London, 1976; Mir, Moscow, 1979), pp. 109–127.
L. B. Zuev, Pis’ma Zh. Tekh. Fiz. 31(3), 1 (2005) [Tech. Phys. Lett. 31, 89 (2005)].
V. A. Pozdnyakov and A. M. Glezer, Pis’ma Zh. Tekh. Fiz. 21(1), 31 (1995) [Tech. Phys. Lett. 21, 13 (2005)].
R. A. Andrievskii and A. M. Glezer, Izv. Vyssh. Uchebn. Zaved., Fiz. 52(9/2), 15 (2009).
I. Kovách, N. Q. Chinh, and E. Kovách-Csetényi, Phys. Status Solidi A 194, 3 (2002).
Yu. Z. Estrin, N. V. Isaev, V. V. Pustovalov, et al., Kristallografiya 54, 1097 (2009) [Crystallogr. Rep. 54, 1043 (2009)].
R. W. K. Honeycombe, The Plastic Deformation of Metals (Arnold, London, 1968; Mir, Moscow, 1972).
S. D. Gertsriken and I. Ya. Dekhtyar, Diffusion in Solid Metals and Alloys (GIFML, Moscow, 1960) [in Russian].
S. A. Barannikova, Fiz. Mezomekh. 8(3), 19 (2005).
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © L.B. Zuev, N.V. Zarikovskaya, M.A. Fedosova, 2010, published in Zhurnal Tekhnicheskoĭ Fiziki, 2010, Vol. 80, No. 9, pp. 68–74.
Rights and permissions
About this article
Cite this article
Zuev, L.B., Zarikovskaya, N.V. & Fedosova, M.A. Plastic flow macrolocalization in aluminum and the Hall-Petch relation. Tech. Phys. 55, 1299–1305 (2010). https://doi.org/10.1134/S1063784210090112
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1063784210090112