Abstract
We studied Young’s modulus and internal friction of the V–4Ti–4Cr alloy with different hydrogen impurity concentrations in the temperature range of 100–300 K at oscillation frequencies of ~100 kHz. Hydrogenation of the alloy causes a minimum in the Young’s modulus temperature dependence due to the precipitation/dissolution of vanadium monohydride particles and a relaxation peak in the temperature spectrum of internal friction at ~140 K, which can be associated with Snoek-type hydrogen relaxation due to the interaction of hydrogen atoms with titanium atoms.
Similar content being viewed by others
REFERENCES
R. J. Kurtz, K. Abe, V. M. Chernov, D. T. Hoelzer, H. Matsui, T. Muroga, and G. R. Odette, J. Nucl. Mater. 329–333, 47 (2004).
A. K. Shikov, V. M. Chernov, M. M. Potapenko, I. N. Gubkin, V. A. Drobyshev, and V. S. Zurabov, MiTOM No. 11, 49 (2004).
J. M. Chen, V. M. Chernov, R. J. Kurtz, and T. Muroga, J. Nucl. Mater. 417, 289 (2011).
T. Muroga, J. M. Chen, V. M. Chernov, R. J. Kurtz, and M. Le Flem, J. Nucl. Mater. 455, 263 (2014).
J. R. DiStefano, J. H. De Van, D. H. Röhrig, and L. D. Chitwood, J. Nucl. Mater. 273, 102 (1999).
K. Natesan and W. K. Soppet, J. Nucl. Mater. 283–287, 1316 (2000).
K. Aoyagi, E. P. Torres, T. Suda, and S. Ohnuki, J. Nucl. Mater. 283–287, 876 (2000).
J. Chen, Z. Xu, and L. Yang, J. Nucl. Mater. 307–311, 566 (2002).
J. Chen, T. Muroga, S. Qiu, Y. Xu, Y. Den, and Z. Xu, J. Nucl. Mater. 325, 79 (2004).
S. P. Nikanorov and B. K. Kardashev, Elasticity and Dislocation Inelasticity of Crystals (Nauka, Moscow, 1985) [in Russian].
M. S. Blanter, I. S. Golovin, H. Neuhäuser, and H.‑R. Sinning, Internal Friction in Metallic Materials. A Handbook (Springer, Berlin, 2007).
G. Cannelli and F. M. Mazzolai, J. Phys. Chem. Solids 31, 1913 (1970).
C. V. Owen and T. E. Scott, Metall. Mater. Trans. B 3, 1715 (1972).
H. Y. Chang and C. A. Wert, Acta Metall. 21, 1233 (1973).
M. Koiwa, K. Shibata, and O. Yoshinari, Trans. JIM 21, 191 (1980).
O. Yoshinari and M. Koiwa, Acta Metall. 30, 1979 (1982).
O. Yoshinari and M. Koiwa, Acta Metall. 30, 1987 (1982).
G. Cannelli, R. Cantelli, and F. Cordero, J. Phys. (Fr.) 44 (Coll. C9), 403 (1983).
C. V. Owen and O. Buck, Scr. Metall. 17, 649 (1983).
G. Cannelli, R. Cantelli, and F. Cordero, Scr. Metall. 18, 1031 (1984).
M. Koiwa and O. Yoshinari, J. Phys. (Fr.) 46 (Coll. C10), 99 (1985).
S. Tanaka and M. Koiwa, J. Phys. (Fr.) 42 (Coll. C5), 781 (1981).
S. Tanaka and M. Koiwa, Scr. Metall. 15, 403 (1981).
H. Mizubayashi, S. Okuda, and M. Daikubara, Scr. Metall. 13, 1131 (1979).
H. Mizubayashi, S. Amano, S. Okuda, and M. Shimada, Scr. Metall. 16, 343 (1982).
B. J. Makenas and H. K. Birnbaum, Acta Metall. 28, 979 (1980).
K. A. Moroz, V. M. Chernov, M. M. Potapenko, V. A. Drobyshev, and M. V. Kravtsova, Perspekt. Mater., No. 3, 14 (2020).
S. Tanaka and H. Kimura, Trans. JIM 20, 647 (1979).
ACKNOWLEDGMENTS
The authors are grateful to V.M. Chernov (the Bochvar High-Tech Research Institute of Inorganic Materials) for the samples provided for the study.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors declare that they have no conflicts of interest.
Additional information
Translated by O. Zhukova
Rights and permissions
About this article
Cite this article
Kardashev, B.K., Sapozhnikov, K.V. Effect of Hydrogen on Young’s Modulus and Internal Friction of V–4Ti–4Cr Alloy. Phys. Solid State 64, 11–14 (2022). https://doi.org/10.1134/S1063783422010097
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1063783422010097