Abstract
The paper discusses the process of welding copper-based powder on samples of steel 40 Kh by radiation of a continuous CO2 laser. It is shown that the friction coefficients are 0.014–0.021 for samples cladded by a scanning beam, which is lower by a factor of two than for samples of cast bronze. The effect of transverse beam oscillations on the quality and performance of the cladding process is studied. It is shown that, for a beam scanning frequency of 220 Hz, the cladding performance increases by a factor of 1.5.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
U. Articek, et al., Adv. Product. Eng. Manage., No. 8 (3), 169 (2013).
V. V. Rybin et al., Quest. Mater. Sci., No. 1 (45), 220 (2006).
A. I. Cybulski et al., Welding Product., No. 4, 37 (2017).
F. Arias-Gonzalez et al., Proc. Manuf. 13, 177 (2017).
D. W. Zeng, C. S. Xie, and M. Q. Wang, Mater. Sci. Eng. 344, 357 (2003).
H. Zhang, H. Yizhua, Xiaomina, and P. Ye, Appl. Surf. Sci. 256, 5837 (2010).
O. G. Devojno, E. Feldshtein, M. A. Kardapolava, and N. I. Lutsko, Surf. Coat. Technol. 358, 195 (2019).
M. Sitarz, A. Kurc-Lisiecka, and W. Gamon, Arch. Foundry Eng. 1, 89 (2017).
V. P. Biryukov and A. V. Dozorov, J. Mach. Manuf. Reliab., No. 1, 60 (2006).
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors declare that they have no conflicts of interest.
Additional information
Russian Text © The Author(s), 2019, published in Yadernaya Fizika i Inzhiniring, 2019, Vol. 10, No. 2.
Rights and permissions
About this article
Cite this article
Biryukov, V.P., Bazlova, T.A. Laser Cladding of Copper Alloys on Steel. Phys. Atom. Nuclei 82, 1450–1453 (2019). https://doi.org/10.1134/S1063778819110024
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1063778819110024