Abstract
The temperature regime is calculated for two different designs of containers with uranium-bearing material for the upgraded VVR-Ts research reactor facility (IVV.10M). The containers are to be used in the production of 99Mo. It is demonstrated that the modification of the container design leads to a considerable temperature reduction and an increase in the near-wall boiling margin and allows one to raise the amount of material loaded into the container. The calculations were conducted using the international thermohydraulic contour code TRAC intended to analyze the technical safety of water-cooled nuclear power units.
Similar content being viewed by others
References
www.nuclearmedicine.ru/index.php/component/content/article/2-2010-03-11-14-14-04/155
O. Yu. Kochnov, V. V. Sergeev, and A. A. Kasantsev, Izv. Vyssh. Uchebn. Zaved., Yad. Energet., No. 3, 77 (2010) [in Russian].
TRAC-PFI/Mod 2, Theory Manual (Los Alamos National Laboratory, 1993).
Yu. N. Kuznetsov, Heat Transfer in the Problem of Nuclear Reactor Safety (Energoatomizdat, Moscow, 1989) [in Russian].
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.A. Kazantsev, V.V. Sergeev, O.Yu. Kochnov, 2014, published in Yadernaya Fizika i Inzhiniring, 2014, Vol. 5, No. 4, pp. 304–313.
Rights and permissions
About this article
Cite this article
Kazantsev, A.A., Sergeev, V.V. & Kochnov, O.Y. Calculation of the temperature in the container unit with a modified design for the production of 99Mo at the VVR-Ts research reactor facility (IVV.10M). Phys. Atom. Nuclei 78, 1336–1344 (2015). https://doi.org/10.1134/S1063778815120145
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1063778815120145