Abstract
An aluminum amorphous alloy doped with transition (Fe and Ni) and rare earth (La) metals has been used as an object of systematic study of the structural transformations that are characteristic of different methods of sample preparation for transmission electron microscopy (the mechanical tearing of ribbons, electrochemical thinning, and Ar+-ion etching under different conditions). The results of X-ray diffraction analysis and a calorimetric study of the structure in comparison with electron microscopy data made it possible to determine the optimal method of sample preparation, which ensures minimum distortions in the structure of metastable amorphous alloys with a low crystallization temperature.
Similar content being viewed by others
References
Y. H. Kim, G. S. Choi, I. G. Kim, and A. Inoue, Màter. Trans. JIM 37(9), 1471 (1996).
Y. He, G. J. Schiflet, and S. J. Poon, Acta Metall. Mater. 43, 83 (1995).
A. P. Tsai, A. Inoue, and T. Masumoto, J. Mater. Sci. Lett. 7, 805 (1988).
A. L. Vasiliev, M. Aindow, M. J. Blackburn, and T. J. Watson, Intermetallics 12(4), 349 (2004).
N. J. Magdefrau, A. L. Vasiliev, M. Aindow, et al., Scr. Mater. 51, 485 (2004).
A. L. Vasiliev, M. Aindow, M. J. Blackburn, and T. J. Watson, Scr. Mater. 52, 699 (2005).
J. Vierke, PhD Thesis (Technischen Univ. Berlin, 2008).
L. M. Utevskii, Diffraction Electronic Microscopy in Physical Metallurgy (Metallurgiya, Moscow, 1973) [in Russian].
P. B. Hirsch, A. Howie, R. B. Nicholson, D. W. Pashley, and M. J. Whelan, Electron Microscopy of Thin Crystals (Butterworth, London, 1965; Mir, Moscow, 1965).
J. H. Perepezko, J. Hamman, R. J. Hebert, and H. Rosner, Rev. Adv. Mater. Sci. 18, 448 (2008).
Phase Diagrams of Binary Metallic Systems: Handbook in 3 Vols., Ed. by N. P. Lyakishev (Mashinostroenie, Moscow, 1996), Vol. 1.
Yu. K. Kovneristyi, N. D. Bakhteeva, et al., Metalloved. Term. Obrab. Met., No. 8, 16 (2004).
W. H. Jiang, F. E. Pinkerton, and M. Atzmon, J. Mater. Res. 20(3), 696 (2005).
W. H. Jiang, F. E. Pinkerton, and M. Atzmon, Scr. Mater. 48, 1195 (2003).
Yu. K. Kovneristyi, N. D. Bakhteeva, and E. V. Popova, Deformatsiya Razrushenie Met., No. 1, 35 (2008).
M. J. Kim and R. W. Karpenter, Ultramicroscopy 21(4), 327 (1987).
A. Barna, B. Pécz, and M. Menyhard, Micron 30(3), 267 (1999).
Y. M. Park, D.-S. Ko, K. W. Yi, et al., Ultramicroscopy 107(8), 663 (2007).
M. Wengbauer, J. Gründmayer, and J. Zweck, Proc. EMS-2008 14-Th European Microscopy Congress, 1–5 September 2008, Aachen, Germany, Ed. by Luysberg M. et al. (Springer, Berlin, 2008), Vol. 1, p. 833.
Author information
Authors and Affiliations
Additional information
Original Russian Text © P.A. Volkov, E.V. Todorova, N.D. Bakhteeva, A.G. Ivanova, A.L. Vasil’ev, 2011, published in Kristallografiya, 2011, Vol. 56, No. 3, pp. 407–503.
Rights and permissions
About this article
Cite this article
Volkov, P.A., Todorova, E.V., Bakhteeva, N.D. et al. Specific features of sample preparation from amorphous aluminum alloys for transmission electron microscopy. Crystallogr. Rep. 56, 463–469 (2011). https://doi.org/10.1134/S1063774511030321
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1063774511030321