Abstract
Unusual properties of quasicrystals—a low friction coefficient; high hardness, wear resistance, and oxidation; and low electrical and thermal conductivities—make quasicrystalline materials promising for practical applications. Methods of fabrication of quasicrystalline coatings and examples of their commercial application are considered.
Similar content being viewed by others
References
H. S. Jeevan and S. Ranganathan, J. Non-Cryst. Solids 334–335, 184 (2004).
D. Schechtman, I. Blech, D. Gratias, et al., Phys. Rev. Lett. 53, 1951 (1984).
A. P. Tsai, A. Inoue, and T. Masumoto, Jpn. J. Appl. Phys. 26, L1505 (1987).
A. P. Tsai, A. Inoue, Y. Yokoyama, et al., Philos. Mag. Lett. 61, 9 (1990).
A. P. Tsai, A. Inoue, and T. Masumoto, Philos. Mag. Lett. 62, 95 (1990).
H. Akiyama, Y. Honda, T. Hashimoto, et al., Jpn. J. Appl. Phys. 32, L1003 (1993).
Ö. Rapp, in Physical Properties of Quasicrystals, Ed. by Z. M. Stadnik (Springer-Verlag, Berlin, 1999), p. 131.
D. S. Shaĭtura, M. N. Mikheeva, and A. A. Teplov, Poverkhnost, No. 10, 105 (2001).
D. S. Shaĭtura, A. G. Domantovskiĭ, A. A. Teplov, and E. D. Ol’shanskiĭ, Poverkhnost, No. 6, 79 (2002).
J. C. Phillips, Phys. Rev. B: Condens. Matter Mater. Phys. 47, 2522 (1993).
E. Belin-Ferre, J. Non-Cryst. Solids 334–335, 323 (2004).
D. N. Davydov, D. Mayou, and C. Berger, Phys. Rev. Lett. 77(15), 3173 (1996).
T. Schaub, J. Delahaye, C. Gignoux, et al., J. Non-Cryst. Solids 250–252, 874 (1999).
Z. M. Stadnik, D. Purdie, M. Garnier, et al., Phys. Rev. B: Condens. Matter Mater. Phys. 55(16), 10 938 (1997).
J. M. Dubois, S. S. Kang, and A. Perrot, Mater. Sci. Eng. A 179–180, 122 (1994).
A. L. Pope, T. M. Tritt, M. A. Chernikov, and M. Feuerbacher, Appl. Phys. Lett. 75, 1854 (1999).
K. Kirihara, T. Nagata, and K. Kimura, J. Alloys Compd. 342, 469 (2002).
Physical Values: A Handbook, Ed. by I. S. Grigor’ev and E. Z. Meĭlikhov (Energoatomizdat, Moscow, 1991).
C. C. Homes, T. Timusk, X. Wu, et al., Phys. Rev. Lett. 67, 2694 (1991).
L. Degiorgi, M. A. Chernikov, C. Beeli, et al., Solid State Commun. 87, 721 (1993).
D. Macko and M. Kasparkova, Philos. Mag. Lett. 67, 307 (1993).
D. N. Basov, F. S. Pierce, P. Volkov, et al., Phys. Rev. Lett. 73, 1865 (1994).
L. M. Zhang, H. C. Zhang, Q. G. Zhou, et al., Wear 225–229, 784 (1999).
L. M. Zhang, P. Brunet, H. C. Zhang, et al., Tribology Lett. 8, 233 (2000).
R. P. Matthews, C. I. Lang, and D. Shechtman, Tribology Lett. 7, 179 (1999).
E. Fleury, S. M. Lee, J. S. Kim, et al., Wear 253, 1057 (2002).
C. J. Jenks and P. A. Thiel, Langmuir 14, 1392 (1998).
J. S. Ko, A. J. Gellman, T. A. Lograsso, et al., Surf. Sci. 423, 243 (1999).
T. Shibuya, T. Hashimoto, and Sh. Takeuchi, Jpn. J. Appl. Phys. 29, L349 (1990).
L. Bresson and D. Gratias, J. Non-Cryst. Solids 153–154, 468 (1993).
S. S. Kang and J.-M. Dubois, Phylos. Mag. 66(1), 151 (1992).
A. Haugeneder, T. Eisenhammer, and A. Mahr, Thin Solid Films 307, 120 (1997).
D. Rouxel, M. Gil-Gavatz, and P. Pigeat, J. Non-Cryst. Solids 351, 802 (2005).
S. S. Kang, G. M. Dubois, and J. von Stebut, J. Mater. Res. 8(10), 2471 (1993).
D. J. Sordelet, M. J. Kramer, and O. Unal, J. Therm. Spray Technol. 4(3), 235 (1995).
D. J. Sordelet, M. F. Bresser, I. E. Anderson, et al., J. Therm. Spray Technol. 5(2), 161 (1996).
E. Fleury, S. M. Lee, W. T. Kim, et al., J. Non-Cryst. Solids 278, 194 (2000).
J. Kong, C. Zhou, and S. Gong, Surf. Coat. Technol. 165, 281 (2003).
E. Huttunen-Saarivirta, E. Turunen, and M. Kallio, Intermetallics 11, 879 (2003).
E. Huttunen-Saarivirta, E. Turunen, and M. Kallio, J. Alloys Compd. 354(1–2), 269 (2003).
M. F. Besser and T. Eisenhammer, MRS Bull. 22(11), 59 (1997).
E. Fleury, Y.-C. Kim, J.-S. Kim, et al., J. Alloys Compd. 342, 321 (2002).
S. M. Lee, E. Fleury, J.-S. Kim, et al., Mater. Res. Soc. Symp. Proc. 643, K15.2.1 (2001).
Z. Minevski, C. L. Tennakoon, K. C. Anderson, et al., Mater. Res. Soc. Symp. Proc. 805, LL10.3.1 (2004).
A. I. Ustinov, B. A. Movichan, and S. S. Polishchuk, Scr. Mater. 50, 533 (2004).
A. Yoshioka, K. Edagava, K. Kimiura, et al., Jpn. J. Appl. Phys. 34, 1606 (1995).
E. J. Widjaja and L. D. Marks, Thin Solid Films 420–421, 295 (2002).
B. S. Phillips and J. S. Zabinski, Tribology Lett. 15(1), 57 (2003).
T. Klein and O. G. Symko, Appl. Phys. Lett. 64(4), 431 (1994).
T. Grenet, F. Giroud, K. Loubet, et al., J. Alloys Compd. 342, 2 (2002).
T. Grenet, F. Giroud, C. Loubet, et al., Mater. Sci. Eng. 294–296, 838 (2000).
T. Eisenhammer and A. Trampert, Phys. Rev. B: Condens. Matter Mater. Phys. 78(2), 262 (1997).
D. J. Sorldelet, S. D. Widener, Y. Tang, et al., Mater. Sci. Eng. 294–296, 834 (2000).
http://engine-materials.ornl.gov/Peer%20Review/Posters/PM_9123%20Poster_Beardsley.pdf.
T. Eisenhammer, Thin Solid Films 270, 1 (1995).
T. Eisenhammer, A. Mahr, A. Haugender, et al., Sol. Energy Mater. Sol. Cells 46, 53 (1997).
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © D.S. Shaĭtura, A.A. Enaleeva, 2007, published in Kristallografiya, 2007, Vol. 52, No. 6, pp. 981–988.