Abstract
Based on the review over theoretical and experimental analyses of influence the drilling machine hammer design exerts on the rock fracture process efficiency, the author draws a conclusion that hammers with curvilinear side surfaces are not an optimal choice as they do not provide a noticeable increase in the impact energy utilization while greatly limit the energy transfer to a work face via a drill rod without breaking the rod.
Similar content being viewed by others
References
Kryukov, G.M., “Formulation and Solution of a General Problem on Optimal Stress Pulses Generated in Rods during Rotary-Percussive Drilling,” Tr. MIREA, 1970, no. 48.
Kryukov, G.M., Fedorov, V.R., Matyushin, A.A., and Bondar’, I.M., “Shapes and Efficiency of Optimum Pulses in Rock Drilling upon Linear Relationship of the Rock Resistance and Rod Penetration Depth,” Tr. MIREA, 1970, no. 48.
Shaposhnikov, I.D., “Wave Impulses Relating to the Improved Performance of Rotary-Percussive Mechanisms of Drilling Machines,” Extended Abstracts of Cand. Tekh. Sci. Dissertation, Frunze, 1969.
Konyashin, Yu.G., “Rock Fracture Testing Results with Different Shape Hammers,” Vzryv. Delo, 1969, no. 66/23.
Alimov, O.D., Manzhosov, V.K., and Erem’yants, V.E., Udar. Rasprostranenie voln deformatsii v udarnykh sistemakh (Impact. Propagation of Strain Waves in Percussive Systems), Moscow: Nauka, 1985.
Ivanov, K.I. and Andreev, V.D., “Destruction of Rocks by Impulses Generated by Different Shape Pistons,” Vzryv. Delo, 1966, no. 58/15.
Ivanov, K.I., Andreev, V.D., Prigozhin, E.I., Yarmak, M.F., Bushin, A.P., and Mustafaev, S.S., “Influence of Piston Shape on the Drilling Velocity,” Vzryv. Delo, 1969, no. 66/23.
Nikonova, I.P., Pokrovskii, G.N., and Serpeninov, B.N., Influence of the Shape of an Impulse on the Impulse Transfer in the Hammer-Rod-Medium System, in Peredacha udara i mashiny udarnogo deistviya (Impact Transfer and the Percussive Machines), Novosibirsk: IGD SO AN SSSR, 1976.
Dvornikov, L.T. and Myasnikov, A.A., “Generation of an Impulse in a Half-Infinite Rod by Hammers Shaped as the Hyperboloid of Rotation,” Tr. FPI, 1977, issue 104.
Dvornikov, L.T. and Zhukov, I.A., Prodol’nyi udar polukatenoidal’nym boikom (Longitudinal Impact by a Half-Catenoidal Hammer), Novokuznetsk: SibGIU, 2006.
Dvornikov, L.T., Tagaev, B.T., and Myasnikov, A.A., “Improved Performance of Drilling Machines in Hard Rocks,” Izv. Vuzov. Gorny Zh., 1984, no. 11.
Fisher, H., Determination of Stress Waveforms in Percussive Drilling, Razrushenie i mekhanika gornykh porod (Failure and the Rock Mechanics), Moscow: Gosgortekhizdat, 1962.
Author information
Authors and Affiliations
Additional information
Original Russian Text © V.E. Erem’yants, 2011, published in Fiziko-Tekhnicheskie Problemy Razrabotki Poleznykh Iskopaemykh, 2011, No. 5, pp. 75–83.
Rights and permissions
About this article
Cite this article
Erem’yants, V.E. Effectual design of hammers for rotary-percussive drilling machines. J Min Sci 47, 628–635 (2011). https://doi.org/10.1134/S106273914705011X
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S106273914705011X