Abstract
Crushed rock shear tests are carried out to determine stability of a tailings pond dam. The tests allow finding the rock strength at different grain composition and density of rocks, as well as at different shear ring diameters and normal pressures. It is found that the internal friction angle and cohesion range as 35–40° and 0.0256–0.0293 MPa, respectively, in compacted rocks, and as 25–30° and 0.0163–0.0184 MPa, respectively, in uncompacted rocks.
REFERENCES
Ziangirov, R.S. and Kal’bergenov, R.G., Deformability of Coarse-Grained Soils, Inzh. Geolog., 1987, no. 3, pp. 107–117.
Krivorotov, A.P., Fracture Conditions of Soil Samples on Single-Plane Shearing Machine, Izv. Vuzov. Stroit., 2000, no. 1, pp. 133–136.
Nizametdinov, F.K., Nagibin, A.A., Levashov, V.V., Nizametdinov, R.F., Nizametdinov, N.F., and Ksymzhanova, A.E., Methods of In Situ Strength Testing of Rocks and Joints, Journal of Mining Science, 2016, vol. 52, no. 2, pp. 226–232.
Kurlenya, M.V., Serdyukov, S.V., and Patutinm, A.V., Assessment of Deformation Properties of Rocks by Pressuremeter Testing in Hydrofractured Interval, Journal of Mining Science, 2015, vol. 51, no. 4, pp. 718–723.
Lizunkin, V.M., Babello, V.A., Lizunkin, M.V., and Beidin, A.V., Determination of Poisson’s Ratio in Crushed Hard Rocks of Various Grain-Size Composition, Gornyi Zhurnal, 2017, no. 2, pp. 84–92.
Lizunkin, V.M., Babello, V.A., Lizunkin, M.V., and Beidin, A.V., Estimation of Strength Properties of Streltsov Field Uranium Ore, Gornyi Zhurnal, 2018, no. 4, pp. 51–55.
Gercek, H., Poisson’s Ratio Values for Rocks, Int. J. Rock Mech. Min. Sci., 2007, vol. 44, no. 1, pp. 1–13.
Kayabasi, A., Gokceoglu, C., and Ercanoglu, M., Estimating The Deformation Modulus of Rock Masses: A Comparative Study, Int. J. Rock Mech. Min. Sci., 2003, vol. 40, no. 1, pp. 55–63.
Seif El Dine, B., Dupla, J.C., Frank, R., Canou, J., and Kazan, Y., Mechanical Characterization of Matrix Coarse-Grained Soils with a Large-Sized Triaxial Device , Canadian Geotech. J., 2010, vol. 47, no. 4, pp. 425–438.
Xu, W.J., Wang, S., Zhang, H.Y., and Zhang, Z.L., Discrete Element Modeling of a Soil–Rock Mixture Used in an Embankment Dam, Int. J. Rock Mech. Min. Sci., 2016, vol. 86, pp. 141–156.
Zou, P., Zhao, X., Meng, Z., Li, A., Liu, Z., and Hu, W., Sample Rocks Tests and Slope Stability Analysis of a Mine Waste Dump, Advances Civil Eng., 2018, 6835709.
Yang Jian Ping, Chen Wei Zhong, Yang Dian Sen, and Yuan Jing Qiang, Numerical Determination of Strength and Deformability of Fractured Rock Mass by FEM Modeling, Comp. Geotech., 2015, vol. 64, pp. 20–31.
Ivars, D.M., Pierce, M.E., Darcel, C., Reyes-Montes, J., Potyondy, D.O., Young, R.P., and Cundall, P.A., The Synthetic Rock Mass Approach for Jointed Rock Mass Modeling, Int. J. Rock Mech. Min. Sci., 2011, vol. 48, no. 2, pp. 219–244.
Kouakou, N.M., Cuisinier, O., and Masrouri, F., Estimation of the Shear Strength of Coarse-Grained Soils with Fine Particles, Transportation Geotec., 2020, vol. 25.
RF State Standard GOST 20276.4-2020, Moscow: Standartinform, 2020.
USSR State Standard GOST 28514-90. Moscow: Standartinform, 2005.
Author information
Authors and Affiliations
Corresponding authors
Additional information
Translated from Fiziko-Tekhnicheskie Problemy Razrabotki Poleznykh Iskopaemykh, 2023, No. 2, pp. 82-90. https://doi.org/10.15372/FTPRPI20230208.
Rights and permissions
About this article
Cite this article
Babello, V.A., Lizunkin, V.M., Lizunkin, M.V. et al. Crushed Rock Strength Testing at Iron Ridge Deposit. J Min Sci 59, 256–263 (2023). https://doi.org/10.1134/S1062739123020084
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1062739123020084