Abstract
In this paper, the effect of elevated thermal treatment on the physico-mechanical parameters of Chunar sandstone from Mirzapur district of U.P. was investigated. The studied area is represented geologically by the Vindhyan Supergroup from Meso to Neproterozoic age. Sandstone of Chunar area, Mirzapur, U.P. has been granted the tag of Geographical Indication (GI) under the category of natural goods in 2019. Mechanical strength tests (indirect tensile and uniaxial compressive strength) were performed by a universal testing machine. Samples were treated at elevated temperature in the electric furnace at different temperatures for conducting mechanical and physical tests in each sample and results were recorded. The results suggest that for sandstone, high temperature treatment leads to volume expansion, weight reduction and a decrease in density as well as the reduction in the strength characteristics. Up to 200 °C there is an inappreciable increase in indirect tensile strength and compressive strength but after 200 °C strength gradually decreases. Beyond 400 °C, the P-wave velocities showed a sharp decline due to elevated temperature treatment induced cracks in the heated sandstone.
REFERENCES
Fitzner, B., Heinrichs, K., and La Bouchardiere, D., Weathering Damage on Pharaonic Sandstone Monuments in Luxor-Egypt, Bull. Env., 2003, vol. 38, no. 9–10, pp. 1089–1103.
Dorn, R.I., Boulder Weathering and Erosion Associated with a Wildfire, Sierra Ancha Mountains, Arizona, Geomorph., 2003, vol. 55, no. 1–4, pp. 155–171.
Zhu, C. and Arson, C., A Thermo-Mechanical Damage Model for Rock Stiffness during Anisotropic Crack Opening and Closure, Acta Geotechnica, 2014, vol. 9, no. 5, pp. 847–867.
Jaeger, J.C., Cook, N.G., and Zimmerman, R., Fundamentals of Rock Mechanics, John Wiley & Sons, 2009.
Tian, H., Kempka, T., Xu, N.X., and Ziegler, M., Physical Properties of Sandstones after High Temperature Treatment, J. Rock Mech. Rock Eng., 2012, vol. 45, no. 6, pp. 1113–1117.
Dwivedi, R.D., Goel, R.K., Prasad, V.V.R., and Sinha, A., Thermo-Mechanical Properties of Indian and Other Granites, Int. J. Rock Mech. Min. Sci., 2008, vol. 45, no. 3, pp. 303–315.
Dmitriyev, A.P., Physical Properties of Rocks at High Temperatures, National Aeronautics and Space Administration, 1972, vol. 684.
Huang, Y.H., Yang, S.Q., Tian, W.L., Zhao, J., Ma, D., and Zhang, C.S., Physical and Mechanical Behavior of Granite Containing Pre-Existing Holes after High Temperature Treatment, Archives Civil Mech. Eng., 2017, vol. 17, no. 4, pp. 912–925.
Yang, S.Q., Ranjith, P.G., Jing, H.W., Tian, W.L., and Ju, Y., An Experimental Investigation on Thermal Damage and Failure Mechanical Behavior of Granite after Exposure to Different High Temperature Treatments, Geothermics, 2017, vol. 65, pp. 180–197.
Yin, T., Li, X., Cao, W., and Xia, K., Effects of Thermal Treatment on Tensile Strength of Laurentian Granite Using Brazilian Test, Rock Mech. Rock Eng., 2015, vol. 48, no. 6, pp. 2213–2223.
Domanski, M. and Webb, J., A Review of Heat Treatment Research, Lithic Technol., 2007, pp. 153–194.
Hajpal, M., Changes in Sandstones of Historical Monuments Exposed to Fire or High Temperature, Fire Technol., 2002, vol. 38, no. 4, pp. 373–382.
Lion, M., Skoczylas, F., and Ledesert, B., Effects of Heating on the Hydraulic and Poroelastic Properties of Bourgogne Limestone, Int. J. Rock Mech. Min. Sci., 2005, vol. 42, no. 4, pp. 508–520.
Griffiths, L., Heap, M.J., Baud, P., and Schmittbuhl, J., Quantification of Microcrack Characteristics and Implications for Stiffness and Strength of Granite, Int. J. Rock Mech. Min. Sci., 2017, vol. 100, pp. 138–150.
Heuze, F.E., High-Temperature Mechanical, Physical and Thermal Properties of Granitic Rocks—A Review, Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 1983, vol. 20, no. 1, pp. 3–10.
Xu, X., Gao, F., Shen, X., and Xie, H., Mechanical Characteristics and Microcosmic Mechanisms of Granite under Temperature Loads, J. Chin Univ. Min. Tech., 2008, vol. 18, pp. 413–417.
Zhang, L., Mao, X., Liu, R., Guo, X., and Ma, D., The Mechanical Properties of Mudstone at High Temperatures: An Experimental Study, J. Rock Mech. Rock Eng., 2014, vol. 47, pp. 1479–1484.
Cheng, Z. and Arson, C., A Thermo-Mechanical Damage Model for Rock Stiffness during Anisotropic Crack Opening and Closure, Acta Geotech., 2014, vol. 9, pp. 847–867.
Singh, C.S. and Shrivastva, B.K., Study of P&S Wave Velocities in Chunar Sandstone, Int. J. Earth Sci. Eng., 2006, pp. 512–519.
Soroush, H., Qutob, H., Oil, W., and Me, T., Evaluation of Rock Properties Using Ultrasonic Pulse Technique and Correlating Static to Dynamic Elastic Constants, Proc. of the 2nd South Asian Geoscience Conf. and Exhibition (GEOIndia 2011), New Delhi, India, 2011.
Sarkar, K., Vishal, V., and Singh, T.N., An Empirical Correlation of Index Geomechanical Parameters with the Compressional Wave Velocity, Geotech. Geol. Eng., 2012, vol. 30, no. 2, pp. 469–479.
Kassab, M.A. and Weller, A., Study on P-Wave and S-Wave Velocity in Dry and Wet Sandstones of Tushka Region, Egypt, Egyptian J. Petroleum, 2015, vol. 24, no. 1, pp. 1–11.
Parent, T., Domede, N., Sellier, A., and Mouatt, L., Mechanical Characterization of Limestone from Sound Velocity Measurement, Int. J. Rock Mech. Min. Sci., 2015, vol. 79, pp. 149–156.
Kurtulus, C., Cakir, S., and Yoğurtcuoğlu, A., Ultrasound Study of Limestone Rock Physical and Mechanical Properties, Soil Mechan. Foundation Eng., 2016, vol. 52, no. 6.
Al-Dousari, M., Garrouch, A.A., and Al-Omair, O., Investigating the Dependence of Shear Wave Velocity on Petrophysical Parameters, J. Petroleum Sci. Eng., 2016, vol. 146, pp. 286–296.
Bhattacharyya, A., Recent Advances in Vindhyan Geology, Geol. Soc. India Memoir, 1996, vol. 36, p. 331.
Bose, P.K., Sarkar, S., Chakrabarty, S., and Banerjee, S., Overview of Meso to Neoproterozoic Evolution of the Vindhyan Basin, Central India. J. Sediment. Geol., 2001, vol. 142, pp. 395–419.
ISRM. Suggested Methods for Determining the Uniaxial Compressive Strength and Deformability of Rock Materials, Int. J. Rock Mech. Min. Sci, Geomech. Abstr., 1979, vol. 16, pp. 135–140.
Yavuz, H., Demirdag, S., and Caran, S., Thermal Effect on the Physical Properties of Carbonate Rocks, Int. J. Rock Mech. Min. Sci., 2010, vol. 47, no. 1, pp. 94–103.
Pappalardo, G., Punturo, R., Mineo, S., and Contrafatto, L., The Role of Porosity on the Engineering Geological Properties of 1669 Lavas from Mount Etna, Engineering Geology, 2017, vol. 221, pp. 16–28.
Somerton, W.H., Thermal Properties and Temperature-Related Behavior of Rock/Fluid Systems, Elsevier, Amsterdam, 1992.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Fiziko-Tekhnicheskie Problemy Razrabotki Poleznykh Iskopaemykh, 2023, No. 1, pp. 61-69. https://doi.org/10.15372/FTPRPI20230106.
Rights and permissions
About this article
Cite this article
Singh, A., Verma, A.K., Kumar, A. et al. Effect of Temperature on Physico-Mechanical Properties of Chunar Sandstone, Mirzapur, U.P., India. J Min Sci 59, 53–62 (2023). https://doi.org/10.1134/S1062739123010064
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1062739123010064