Abstract
A set of geomechanical studies is carried out to justify the angles of stable slopes in the Dzhetygarinsky open-pit mine, including testing the physico-mechanical properties of rocks, studying the structure of adjacent rock mass, determining the values of the mining rock mass rating (MRMR) and zoning the open-pit surface according to Professor Laubscher’s classification. The values of slope angles of open-pit benches are recommended, and the measures to ensure their stability are developed. The factors affecting the adjacent rock mass most negatively are identified in classifying the rocks of open-pit mine surface. It is found that the effect of certain factors can be significantly reduced, which allows increasing the values of pitwall control angles while maintaining the proper degree of mining safety.
Similar content being viewed by others
References
Kuz’min, E.V. and Uzbekova, A.R., Rating Classifications of Hard Rock Masses: Prerequisites for Creation, Development and Appllication Area, GIAB, 2004, no. 4, pp. 201–203.
Laubscher, D.H. and Jakubec, J., The MRMR Rock Mass Classification for Jointed Rock Masses, In Underground Mining Methods: Engineering Fundamentals and International Case Studies (eds. W. A. Hustrulid and R. L. Bullok), Society of Mining Metallurgy and Exploration, SME, 2001.
Prokopov, A.Yu. and Gergart, Yu.A., Testing and Assessing the Accuracy of the Non-Destructive Express Method for Determining the Strength Properties of the Rock Mass in the Reconstruction of the Roki Tunnel, Gornyi Zhurnal, 2015, no. 4, pp. 101–107.
Kartashov, S.A. and Prokopov, A.Yu., The Use of the Express Method for Monitoring the Strength of Hard Rocks during Tunneling, in: Mechanisms for Controlling the Implementation of Technical Innovations: Proc. of International Scientific and Practical Conference, Ufa, 2017.
Aksoy, C.O., Review of Rock Mass Rating Classification: Historical Developments, Applications and Restrictions, J. Min. Sci., 2008, vol. 44, no. 1, pp. 51–63.
Kozyrev, A.A. and Gubinsky, N.O., Determination of the Rating of Enclosing Rocks and Diamond Deposit Ores in Accordance with the D. Laubscher’s Classification, GIAB, 2011, no. 8, pp. 89–99.
Makarov, A.B., Justification of the Permissible Parameters of Shrink Stoping and Pillars, J. Fundament. Appl. Min. Sci., 2015, vol. 2, pp. 261–267.
Makarov, A.B., Rasskazov, I.Yu., Saksin, B.G., Livinsky, I.S., and Potapchuk, M.I., Geomechanical Evaluation of Roof-and-Pillar Parameters in Transition to Underground Mining, J. Min. Sci., 2016, vol. 52, no. 3, pp. 438–447.
Eremenko, V.A., Ainbinder, I.I., Patskevich, P.G., and Babkin, E.A., Assessment of the Rock Mass Condition in the Mines of PD PJSC MMC Norilsk Nickel, GIAB, 2017, no. 1, pp. 5–17.
Rybin, V.V., Kalyuzhny, A.S., and Potapov, D.A., Geomechanical Justification of Open-Pir Wall Parameters in Oleniy Ruchei deposit and Monitoring of Its Stability, Monitoring of Natural and Technogenic Processes in Mining, Proc. of All-Russian Sci. Tech. Conf., Apatity, 2013.
Rybin, V.V. and Gubinsky, N.O., Determination of Rock Mass Rating Using D. Laubscher’s Classification in Conditions of OJSC Apatit Mines, GIAB, 2012, no 3, pp. 140–143.
Laubscher, D.H., Geomechanics Classification of Jointed Rock Masses-Mining Applications, Transactions of Institute of Mining and Metallurgy, Section A: Mining Industry, 1977, vol. 86, A1–A8.
Read, J.R.L. and Stacey, P.F., Guidelines for Open Pit Slope Design, CSIRO, Collingwood, Australia, 2010.
Laubscher, D.H., A Geomechanics Classification System for Rating of Rock Mass in Mine Design, J. South African Inst. of Min. and Metallurgy, 1990, vol. 90, no. 10, pp. 257–273.
Haines, A. and Terbrugge, P.J., Preliminary Estimation of Rock Slope Stability Using Rock Mass Classification Systems, Proc. 7thCongr. Rock Mechanics, Aachen, Germany, 1991.
Flyagin, A.S. and Zharikov, S.N., Perimeter Blasting in Mining Mineral Deposits, Problemy nedropolzovaniya, 2016, no. 3 (10), pp. 70–73.
Author information
Authors and Affiliations
Corresponding authors
Additional information
Original Russian Text © The Author(s), 2019, published in Fiziko-Tekhnicheskie Problemy Razrabotki Poleznykh Iskopaemykh, 2019, No. 4, pp. 10–19.
Rights and permissions
About this article
Cite this article
Panzhin, A.A., Kharisov, T.F. & Kharisova, O.D. Substantiation of Stable Pitwall Parameters Based on the Mining Rock Mass Rating. J Min Sci 55, 522–530 (2019). https://doi.org/10.1134/S1062739119045867
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1062739119045867