Skip to main content
SpringerLink
Log in

Backfilling Mixture Preparation Using Milled Granulated Blast-Furnace Slag

  • Mineral Mining Technology
  • Published:
Journal of Mining Science Aims and scope

Abstract

Backfilling mixture preparation technology using a cement-slag binder is developed for the Artem’evsky mine. It is shown that backfill with granulated blast-furnace slag reaches project strength at its fineness 80% of content milled down to -80 urn size. The authors analyze influence of milling fineness of granulated blast-furnace slag from different manufacturers on strength and rheological properties of backfill. The economic analysis of cost of binder in formation of load-bearing layer of backfill prepared using fly ash and milled granulated blast-furnace slag is performed.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. Chen, G.Y.. and Huang, W.H., Investigation on Blending CFB Ash with Blast Furnace Slag as Replacement for Portland Cement used in Concrete Binders, Adv. Mater. Res, 2013, vol. 723, pp. 623–629.

    Article  Google Scholar 

  2. Hu, S.G., Lu, X.J., Niu, H.L., and Jin, Z.Q., Research on Preparation and Properties of Backfilling Cementation Material Based on Blast Furnace Slag, Adv. Mater. Res., 2011, vol. 158, pp. 189–196.

    Article  Google Scholar 

  3. Wu, M., Hu, X., Zhang, Q, Cheng, W., and Hu, Z., Orthogonal Experimental Studies on Preparation of Mine-Filling Materials from Carbide Slag, Granulated Blast-Furnace Slag, Fly Ash, and Flue-Gas Desulphurisation Gypsum, Adv. Mater. Sci. Eng., 2018, Article ID 4173520P, pp. 1–12.

    Google Scholar 

  4. Chernigovsky, A.I., Implementation of New Technologies in Concrete Articles Production with a Purpose to Save Energy and Cement, ZhBI konstr., 2010, no. 2, pp. 50–58.

    Google Scholar 

  5. Bitimbaev, M.Zh., Krupnik, L.A., and Shaposhnik, Yu.N., Teoriya i praktika zakladochnykh rabot pri razrabotke mestorozhdenii poleznykh iskopaemykh (Theory and Practice of Backfilling in Mineral Mining), Almaty: Ass. Vuzov Kazakh., 2012.

    Google Scholar 

  6. Krupnik, L.A., Shaposhnik, Yu.N., Shaposhnik, S.N., and Tursunbaeva, A.K., Backfilling Technology in Kazakhstan Mines, J. Min. Sci, 2013, vol. 49, no. 1, pp. 82–89.

    Article  Google Scholar 

  7. Krupnik, L.A., Shaposhnik, Yu.N., and Shaposhnik, S.N., The Development of Backfilling Technology in Terms of Novo-Leninogorsky Mine Planning, GIAB, 2015, no. 8, pp. 25–32.

    Google Scholar 

  8. Tekhnologicheskaya instruktsiya (tekhnologicheskii reglament) po proizvodstvu zakladochnykh rabot na BZK 1, 2, I 3 dlya usloviy Artem ’yevskogo rudnika (Process Instruction (Process Regulation) on Backfilling in CFP-1,-2, and -3 for the Artem’yevsky Mine): Ust-Kamenogorsk: DGP VNIItsvetmet, 2010.

  9. GOST 25818-91. Zoly unosa teplovykh elektrostantsii dlya betonov. Tekhnicheskie usloviya (s izmeneniem No. 1 (Fly Ashes from Power Stations for Concrete. Technical Specifications (as amended no. 1). Introduced 01.07.91.

  10. GOST 3476-74. Shlaki domennye i elektrotermofosfornye granulirovannye dlya proizvodstva tsementov. Ministerstvo promyshlennosti stroitel ’nykh materialov SSSR (Granulated Blast Furnace and Phosphoric Slag for Cement Production. Ministry of Production of Constructing Materials of the USSR), 1974, Introduced 01.01.75.

  11. STO SMK 09.90.19. Shlak domennyi granulirovannyi molotyi (Organizational Standard Quality Management System 09.90.19. Milled Granulated Blast Furnace Slag), 2013.

  12. Kravchenko, V.P., and Strutinskiy, V.A., Hydraulic Activity of Blast-Furnace Slag, Stal’, 2007, no. 1, pp. 94–95.

    Google Scholar 

  13. Khobotova, E.B.. and Kalmykova, Yu.S., Dumped Blast-Furnace Slag as a Component for the Production of Binders, Ekol. Promysh., 2011, no. 1, pp. 35–40.

    Google Scholar 

  14. Deng, D.Q., Liu, L., Yao, Z.L., Song, K. I., and Lao, D.Z., A Practice of Ultra-Fine Tailings Disposal as Filling Material in a Gold Mine, J. Environ. Manag., 2017, vol. 196, pp. 100–109.

    Google Scholar 

  15. Ke, X., Zhou, X., Wang, X., Wang, T., Hou, H., and Zhou, M., Effect of Tailings Fineness on the Pore Structure Development of Cemented Paste Backfill, Constr. Build. Mater., 2016, vol. 126, pp. 345–350.

    Article  Google Scholar 

  16. Krupnik, L.A., Shaposhnik, Yu.N., Shaposhnik, S.N., Nurshaiykova, G.T., and Tungushbaeva, Z.K., Technology of Backfill Preparation Based on Cement-and-Slag Binder in Orlov Mine, J. Min. Sci, 2017, vol. 53, no. 1, pp. 84–91.

    Article  Google Scholar 

  17. Taylor, H.F.W, Cement Chemistry [Russian translation], Moscow: Mir, 1996.

    Google Scholar 

  18. Razumov, K.A., Grinding Kinetics of Components with Different Strength, Gornyi Zhurnal, 1947, no. 3, pp. 34–38.

    Google Scholar 

  19. Petlevanyi, M.V., Raising Stability of Filling Mass with Hardening Backfill when Mining at Deep Levels, Geotechnical Mechanics Collection of Works: Dnepropetrovsk, IGTM NANU, 2012, Issue 98, pp. 287–296.

    Google Scholar 

  20. Gal’tseva, N.A., Effective Backfills Based on Synthetic Anhydrites: Diss. Cand. Tech. Sci., Moscow, 2017.

    Google Scholar 

  21. Svetkina, E.Yu. and Petlevanyi, M.V, Regularities of Forming Structure and Strength of Hardening Backfill at Different Binder Dispersion Ability, Transactions, Dnepr: NGU, 2012, no.37, pp. 80–87.

    Google Scholar 

  22. Dolzhikov, P.N., Semiryagin, S.V., and Furdei, P.G., Investigation of Influence Exerted by Granulated Blast-Furnace Slag Fineness on Cement Strength, Transactions, Donetsk: DonGTU, 2013, no.39, pp. 165–169.

    Google Scholar 

  23. Proekt promyshlennoy razrabotli Artem ’yevskogo mestorozhdeniya (Project of Commercial Development of the Artem’evsky Deposit), Ust-Kamenogorsk: TOO Kazgiprotsvetmet, 2016.

Download references

Author information

Authors and Affiliations

  1. Satpaev Kazakh National Research Technical University, Almaty, 50013, Republic of Kazakhstan

    L. A. Krupnik

  2. Chinakal Institute of Mining, Siberian Branch, Russian Academy of Sciences, Novosibirsk, 630091, Russia

    Yu. N. Shaposhnik

  3. Serikbaev East Kazakhstan State Technical University, Ust-Kamenogorsk, 070000, Republic of Kazakhstan

    S. N. Shaposhnik & G. T. Nurshaiykova

Authors
  1. L. A. Krupnik
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Yu. N. Shaposhnik
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. S. N. Shaposhnik
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. G. T. Nurshaiykova
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Yu. N. Shaposhnik.

Additional information

Russian Text © The Author(s), 2019, published in Fiziko-Tekhnicheskie Problemy Razrabotki Poleznykh Iskopaemykh, 2019, No. 1, pp. 74–85.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Krupnik, L.A., Shaposhnik, Y.N., Shaposhnik, S.N. et al. Backfilling Mixture Preparation Using Milled Granulated Blast-Furnace Slag. J Min Sci 55, 66–76 (2019). https://doi.org/10.1134/S1062739119015300

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1134/S1062739119015300

Keywords

Search

Navigation