Abstract
Using inverse distance weighting (IDW), the model of a coal seam with distributed geological and geomechanical characteristics is developed. The hyperbolic dependences of the drum shearer advance speed and capacity on the coal seam thickness are found. Influence of coal sloughing coefficient on drum shearer capacity is assessed. Using the specialized library of MTSS, the integrated model of process flows in coal face area is developed. It is found that there exists drum shearer capacity maximum at the increasing dependence of coal cuttability on longwall length.
Similar content being viewed by others
References
Salama, A., Greberg, J., and Schunnesson, H., The Use of Discrete Event Simulation for Underground Haulage Mining Equipment Selection, Int. J. Min. Miner. Eng., 2014, vol. 5, no. 3, pp. 256–271.
Fioroni, M., Santos, L., Franzese, L., Santana, I., Telles, G., Seixas, J., Penna, B., and Alkmim, G. Logistic Evaluation of an Underground Mine Using Simulation, Proc. of Winter Simulation Conference, Savannah, G., USA, 2014.
Michalakopoulos, T.N., Roumpos, C.P., Galetakis, M.J., and Panagiotou, G.N., Discrete-Event Simulation of Continuous Mining Systems in Multi-Layer Lignite Deposits, Lecture Notes in Production Eng., Proc. of the 12th Int. Symp. Continuous Surface Mining, 2015.
Gospodarczyk, P., Modeling and Simulation of Coal Loading by Cutting Drum in Flat Seams, Arch. Min. Sci., 2016, vol. 61, no. 2, pp. 385–379.
Kara, T. and Savaş, M.C., Design and Simulation of a Decentralized Railway Traffic Control System, Eng. Tech. Appl. Sci. Res., 2016, vol. 6, no. 2, pp. 945–951.
Ayed, M.B., Zouari, L., and Abid, M., Software in the Loop Simulation for Robot Manipulators, Eng. Tech. Appl. Sci. Res., 2017, vol. 7, no. 5, pp. 2017–2021.
Gao, Y., Liu, D., Zhang, X., and He, M., Analysis and Optimization of Entry Stability in Underground Longwall Mining, Sustainability, 2017, vol. 9, no. 11, pp. 2079–2088.
Snopkowski, R., Napieraj, A., and Sukiennik, M., Method of the Assessment of the Influence of Longwall Effective Working Time onto Obtained Mining Output, Arch. Min. Sci., 2017, vol. 61, no. 4, pp. 967–977.
Stepanov, Yu.A and Burmin, L.M., Procedure for Building Three-Dimensional Mine Model, Vestn. Komp. Inf. Tekhn., 2015, no. 9, pp. 25–31.
Ordin, A.A. and Nikol’sky, A.M., Optimizing Cutting Width and Capacity of Shearer Loaders in Longwall Mining of Gently Dipping Coal Seams, J. Min. Sci., 2018, vol. 54, no. 1, pp. 79–86.
Fedorin, V.A., Shakhmatov, V.Ya., Mikhailov, AYu, and Salchak, A.K., Geotekhnicheskii potentsial kombinirovannogo sposoba razrabotki ugolnykh mestorozhdenii Kuzbassa. Problemy i perspektivy kompleksnogo osvoeniya i sokhraneniya zemnykh nedr (Geotechnological Potential of Combined Method of Kuzbass Coal Fields Mining. Problems and Prospects for Integrated Development and Preservation of the Earth’s Interior), Moscow: IPKON RAN, 2014.
Starodubov, A.N., Zinov’ev V.V., Beresnev, M.V., and Maiorov, A.E., Mine Footage Simulation Modeling System, Ugol’, 2016, no. 2, pp. 20–24.
Rudometov, S.V, Visual Interactive System for Engineering Systems Simulation, Vestn. SibGUTI, 2011, no. 3, pp. 14–26.
Okolnishnikov, V., Rudometov, S., and Zhuravlev, S., Simulating the Various Subsystems of a Coal Mine, Eng. Tech. Appl. Sci. Res., 2016, vol. 6, no. 3, pp. 993–999.
Plotnikov, V.P., Derivation of Formula to Calculate the Capacity of Cutter-Loaders with Screw, Drum or Crown Operating Device Ugol’, 2009, no. 9, pp. 5–7.
Solod, V.I., Getopanov, V.N., and Rachek V.M., Proektirovanie i konstruirovanie gornykh mashin I kompleksov (Design and Construction of Mining Machines and Assemblies), Moscow: Nedra, 1982.
Lipkovich, S.M., Osnovy proektirovaniya ugol’nykh shakht (Fundamentals of Coal Mine Design), Moscow: Nedra, 1967.
Vremennye ukazaniya po upravleniyu gornym davleniem v ochistnykh zaboyakh na plastakh moshchnost’yu do 3.5 m i uglom padeniya do 35° (Temporal Guidelines on Ground Control in Longwalls in Seams up to 3.5 m Thick at the Dip Angle to 35°), Leningrad: VNIMI, 1982.
Davis, J.C., Statistics and Data Analysis in Geology, Moscow: Nedra, 1990.
Kaputin, Yu.E., Informatsionnye tekhnologii planirovaniya gornykh rabot (Information Technologies in Planning Mining Operations), Saint Petersburg: Nedra, 2004.
Author information
Authors and Affiliations
Corresponding authors
Additional information
Russian Text © The Author(s), 2019, published in Fiziko-Tekhnicheskie Problemy Razrabotki Poleznykh Iskopaemykh, 2019, No. 1, pp. 64–73.
Rights and permissions
About this article
Cite this article
Ordin, A.A., Okol’nishnikov, V.V., Rudometov, S.V. et al. Evaluation of Drum Shearer Capacity in Coal Seam with Variable Geomechanical and Geotechnical Characteristics. J Min Sci 55, 57–65 (2019). https://doi.org/10.1134/S1062739119015299
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1062739119015299